Add submodule dependency filesHEADmaster

Change-Id: Iaf8d18082d3991dec7c0ebbea540f092188eb4ec

1 files changed, 172 insertions, 0 deletions

diff --git a/roms/u-boot/include/configs/devkit8000.h b/roms/u-boot/include/configs/devkit8000.h
new file mode 100644
index 000000000..87da4410f
--- /dev/null
+++ b/roms/u-boot/include/configs/devkit8000.h
@@ -0,0 +1,172 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2006-2008
+ * Texas Instruments.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Syed Mohammed Khasim <x0khasim@ti.com>
+ *
+ * (C) Copyright 2009
+ * Frederik Kriewitz <frederik@kriewitz.eu>
+ *
+ * Configuration settings for the DevKit8000 board.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_MACH_TYPE	MACH_TYPE_DEVKIT8000
+
+/*
+ * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
+ * 64 bytes before this address should be set aside for u-boot.img's
+ * header. That is 0x800FFFC0--0x80100000 should not be used for any
+ * other needs.
+ */
+
+#define CONFIG_SPL_BSS_START_ADDR       0x80000500 /* leave space for bootargs*/
+#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
+
+#define CONFIG_SYS_SPL_MALLOC_START	0x80208000
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000	/* 1 MB */
+
+/*  Physical Memory Map  */
+
+#include <configs/ti_omap3_common.h>
+
+#define CONFIG_REVISION_TAG		1
+
+/* Size of malloc() pool */
+#undef CONFIG_SYS_MALLOC_LEN
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
+
+/* Hardware drivers */
+/* DM9000 */
+#define CONFIG_NET_RETRY_COUNT		20
+#define	CONFIG_DRIVER_DM9000		1
+#define	CONFIG_DM9000_BASE		0x2c000000
+#define	DM9000_IO			CONFIG_DM9000_BASE
+#define	DM9000_DATA			(CONFIG_DM9000_BASE + 0x400)
+#define	CONFIG_DM9000_USE_16BIT		1
+#define CONFIG_DM9000_NO_SROM		1
+#undef	CONFIG_DM9000_DEBUG
+
+/* TWL4030 */
+
+/* Board NAND Info */
+#define CONFIG_JFFS2_NAND
+/* nand device jffs2 lives on */
+#define CONFIG_JFFS2_DEV		"nand0"
+/* start of jffs2 partition */
+#define CONFIG_JFFS2_PART_OFFSET	0x680000
+#define CONFIG_JFFS2_PART_SIZE		0xf980000	/* size of jffs2 */
+							/* partition */
+
+/* BOOTP/DHCP options */
+#define CONFIG_BOOTP_NISDOMAIN
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_TIMEOFFSET
+#undef CONFIG_BOOTP_VENDOREX
+
+/* Environment information */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"loadaddr=0x82000000\0" \
+	"console=ttyO2,115200n8\0" \
+	"mmcdev=0\0" \
+	"vram=12M\0" \
+	"dvimode=1024x768MR-16@60\0" \
+	"defaultdisplay=dvi\0" \
+	"nfsopts=hard,tcp,rsize=65536,wsize=65536\0" \
+	"kernelopts=rw\0" \
+	"commonargs=" \
+		"setenv bootargs console=${console} " \
+		"vram=${vram} " \
+		"omapfb.mode=dvi:${dvimode} " \
+		"omapdss.def_disp=${defaultdisplay}\0" \
+	"mmcargs=" \
+		"run commonargs; " \
+		"setenv bootargs ${bootargs} " \
+		"root=/dev/mmcblk0p2 " \
+		"rootwait " \
+		"${kernelopts}\0" \
+	"nandargs=" \
+		"run commonargs; " \
+		"setenv bootargs ${bootargs} " \
+		"omapfb.mode=dvi:${dvimode} " \
+		"omapdss.def_disp=${defaultdisplay} " \
+		"root=/dev/mtdblock4 " \
+		"rootfstype=jffs2 " \
+		"${kernelopts}\0" \
+	"netargs=" \
+		"run commonargs; " \
+		"setenv bootargs ${bootargs} " \
+		"root=/dev/nfs " \
+		"nfsroot=${serverip}:${rootpath},${nfsopts} " \
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off " \
+		"${kernelopts} " \
+		"dnsip1=${dnsip} " \
+		"dnsip2=${dnsip2}\0" \
+	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+	"bootscript=echo Running bootscript from mmc ...; " \
+		"source ${loadaddr}\0" \
+	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
+	"eraseenv=nand unlock 0x260000 0x20000; nand erase 0x260000 0x20000\0" \
+	"mmcboot=echo Booting from mmc ...; " \
+		"run mmcargs; " \
+		"bootm ${loadaddr}\0" \
+	"nandboot=echo Booting from nand ...; " \
+		"run nandargs; " \
+		"nand read ${loadaddr} 280000 400000; " \
+		"bootm ${loadaddr}\0" \
+	"netboot=echo Booting from network ...; " \
+		"dhcp ${loadaddr}; " \
+		"run netargs; " \
+		"bootm ${loadaddr}\0" \
+	"autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \
+			"if run loadbootscript; then " \
+				"run bootscript; " \
+			"else " \
+				"if run loaduimage; then " \
+					"run mmcboot; " \
+				"else run nandboot; " \
+				"fi; " \
+			"fi; " \
+		"else run nandboot; fi\0"
+
+#define CONFIG_BOOTCOMMAND "run autoboot"
+
+/* Boot Argument Buffer Size */
+
+/* Defines for SPL */
+
+/* NAND boot config */
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_COUNT	64
+#define CONFIG_SYS_NAND_PAGE_SIZE	2048
+#define CONFIG_SYS_NAND_OOBSIZE		64
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0
+#define CONFIG_SYS_NAND_ECCPOS		{2, 3, 4, 5, 6, 7, 8, 9,\
+						10, 11, 12, 13}
+
+#define CONFIG_SYS_NAND_ECCSIZE		512
+#define CONFIG_SYS_NAND_ECCBYTES	3
+#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_HAM1_CODE_HW
+
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
+#define CONFIG_SYS_NAND_U_BOOT_SIZE	0x200000
+
+/* SPL OS boot options */
+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
+
+#undef CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR
+#undef CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR
+#undef CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS
+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0x500 /* address 0xa0000 */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x8   /* address 0x1000 */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	8     /* 4KB */
+
+#undef CONFIG_SYS_SPL_ARGS_ADDR
+#define CONFIG_SYS_SPL_ARGS_ADDR        (PHYS_SDRAM_1 + 0x100)
+
+#endif /* __CONFIG_H */