Add submodule dependency filesHEADmaster

Change-Id: Iaf8d18082d3991dec7c0ebbea540f092188eb4ec

1 files changed, 236 insertions, 0 deletions

diff --git a/roms/u-boot/include/configs/eb_cpu5282.h b/roms/u-boot/include/configs/eb_cpu5282.h
new file mode 100644
index 000000000..ab9daa407
--- /dev/null
+++ b/roms/u-boot/include/configs/eb_cpu5282.h
@@ -0,0 +1,236 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Configuation settings for the BuS EB+CPU5283 boards (aka EB+MCF-EV123)
+ *
+ * (C) Copyright 2005-2009 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
+ */
+
+#ifndef _CONFIG_EB_CPU5282_H_
+#define _CONFIG_EB_CPU5282_H_
+
+#undef CONFIG_SYS_HALT_BEFOR_RAM_JUMP
+
+/*----------------------------------------------------------------------*
+ * High Level Configuration Options (easy to change)                    *
+ *----------------------------------------------------------------------*/
+
+#define CONFIG_MCFUART
+#define CONFIG_SYS_UART_PORT		(0)
+
+#undef	CONFIG_MONITOR_IS_IN_RAM		/* starts uboot direct */
+
+#define CONFIG_BOOTCOMMAND "printenv"
+
+/*----------------------------------------------------------------------*
+ * Options								*
+ *----------------------------------------------------------------------*/
+
+#define CONFIG_BOOT_RETRY_TIME	-1
+#define CONFIG_RESET_TO_RETRY
+
+#define CONFIG_HW_WATCHDOG
+
+#define STATUS_LED_ACTIVE		0
+
+/*----------------------------------------------------------------------*
+ * Configuration for environment					*
+ * Environment is in the second sector of the first 256k of flash	*
+ *----------------------------------------------------------------------*/
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+#define CONFIG_MCFTMR
+
+#define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_LOAD_ADDR		0x20000
+
+/*#define CONFIG_SYS_DRAM_TEST		1 */
+#undef CONFIG_SYS_DRAM_TEST
+
+/*----------------------------------------------------------------------*
+ * Clock and PLL Configuration						*
+ *----------------------------------------------------------------------*/
+#define	CONFIG_SYS_CLK			80000000      /* 8MHz * 8 */
+
+/* PLL Configuration: Ext Clock * 8 (see table 9-4 of MCF user manual) */
+
+#define CONFIG_SYS_MFD		0x02	/* PLL Multiplication Factor Devider */
+#define CONFIG_SYS_RFD		0x00	/* PLL Reduce Frecuency Devider */
+
+/*----------------------------------------------------------------------*
+ * Network								*
+ *----------------------------------------------------------------------*/
+
+#ifdef CONFIG_MCFFEC
+#define CONFIG_MII_INIT			1
+#define CONFIG_SYS_DISCOVER_PHY
+#define CONFIG_SYS_RX_ETH_BUFFER	8
+#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#define CONFIG_OVERWRITE_ETHADDR_ONCE
+#endif
+
+/*-------------------------------------------------------------------------
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ *-----------------------------------------------------------------------*/
+
+#define	CONFIG_SYS_MBAR			0x40000000
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ *-----------------------------------------------------------------------*/
+
+#define CONFIG_SYS_INIT_RAM_ADDR	0x20000000
+#define CONFIG_SYS_INIT_RAM_SIZE	0x10000
+#define CONFIG_SYS_GBL_DATA_OFFSET	\
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
+ */
+#define CONFIG_SYS_SDRAM_BASE0		0x00000000
+#define	CONFIG_SYS_SDRAM_SIZE0		16	/* SDRAM size in MB */
+
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_SDRAM_BASE0
+#define	CONFIG_SYS_SDRAM_SIZE		CONFIG_SYS_SDRAM_SIZE0
+
+#define CONFIG_SYS_MONITOR_LEN		0x20000
+#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
+#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization ??
+ */
+#define	CONFIG_SYS_BOOTMAPSZ	(8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CONFIG_FLASH_SHOW_PROGRESS	45
+
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
+#define	CONFIG_SYS_INT_FLASH_BASE	0xF0000000
+#define CONFIG_SYS_INT_FLASH_ENABLE	0x21
+
+#define	CONFIG_SYS_MAX_FLASH_SECT	128
+#define	CONFIG_SYS_MAX_FLASH_BANKS	1
+#define	CONFIG_SYS_FLASH_ERASE_TOUT	10000000
+
+#define CONFIG_SYS_FLASH_SIZE		16*1024*1024
+#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CONFIG_SYS_CACHELINE_SIZE	16
+
+#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_SIZE - 8)
+#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_SIZE - 4)
+#define CONFIG_SYS_ICACHE_INV		(CF_CACR_CINV + CF_CACR_DCM)
+#define CONFIG_SYS_CACHE_ACR0		(CONFIG_SYS_SDRAM_BASE | \
+					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+					 CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_CENB | CF_CACR_DISD | \
+					 CF_CACR_CEIB | CF_CACR_DBWE | \
+					 CF_CACR_EUSP)
+
+/*-----------------------------------------------------------------------
+ * Memory bank definitions
+ */
+
+#define CONFIG_SYS_CS0_BASE		0xFF000000
+#define CONFIG_SYS_CS0_CTRL		0x00001980
+#define CONFIG_SYS_CS0_MASK		0x00FF0001
+
+#define CONFIG_SYS_CS2_BASE		0xE0000000
+#define CONFIG_SYS_CS2_CTRL		0x00001980
+#define CONFIG_SYS_CS2_MASK		0x000F0001
+
+#define CONFIG_SYS_CS3_BASE		0xE0100000
+#define CONFIG_SYS_CS3_CTRL		0x00001980
+#define CONFIG_SYS_CS3_MASK		0x000F0001
+
+/*-----------------------------------------------------------------------
+ * Port configuration
+ */
+#define CONFIG_SYS_PACNT		0x0000000	/* Port A D[31:24] */
+#define CONFIG_SYS_PADDR		0x0000000
+#define CONFIG_SYS_PADAT		0x0000000
+
+#define CONFIG_SYS_PBCNT		0x0000000	/* Port B D[23:16] */
+#define CONFIG_SYS_PBDDR		0x0000000
+#define CONFIG_SYS_PBDAT		0x0000000
+
+#define CONFIG_SYS_PCCNT		0x0000000	/* Port C D[15:08] */
+#define CONFIG_SYS_PCDDR		0x0000000
+#define CONFIG_SYS_PCDAT		0x0000000
+
+#define CONFIG_SYS_PDCNT		0x0000000	/* Port D D[07:00] */
+#define CONFIG_SYS_PCDDR		0x0000000
+#define CONFIG_SYS_PCDAT		0x0000000
+
+#define CONFIG_SYS_PASPAR		0x0F0F
+#define CONFIG_SYS_PEHLPAR		0xC0
+#define CONFIG_SYS_PUAPAR		0x0F
+#define CONFIG_SYS_DDRUA		0x05
+#define CONFIG_SYS_PJPAR		0xFF
+
+/*-----------------------------------------------------------------------
+ * I2C
+ */
+
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x00000300
+#define CONFIG_SYS_IMMR			CONFIG_SYS_MBAR
+
+#define CONFIG_SYS_FSL_I2C_SPEED	100000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0
+
+#ifdef CONFIG_CMD_DATE
+#define CONFIG_RTC_DS1338
+#define CONFIG_I2C_RTC_ADDR		0x68
+#endif
+
+/*-----------------------------------------------------------------------
+ * VIDEO configuration
+ */
+
+#define CONFIG_SYS_VCXK_DEFAULT_LINEALIGN	2
+#define	CONFIG_SYS_VCXK_DOUBLEBUFFERED		1
+#define CONFIG_SYS_VCXK_BASE			CONFIG_SYS_CS2_BASE
+
+#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT	MCFGPTB_GPTPORT
+#define CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR		MCFGPTB_GPTDDR
+#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN		0x0001
+
+#define CONFIG_SYS_VCXK_ENABLE_PORT		MCFGPTB_GPTPORT
+#define CONFIG_SYS_VCXK_ENABLE_DDR		MCFGPTB_GPTDDR
+#define CONFIG_SYS_VCXK_ENABLE_PIN		0x0002
+
+#define CONFIG_SYS_VCXK_REQUEST_PORT		MCFGPTB_GPTPORT
+#define CONFIG_SYS_VCXK_REQUEST_DDR		MCFGPTB_GPTDDR
+#define CONFIG_SYS_VCXK_REQUEST_PIN		0x0004
+
+#define CONFIG_SYS_VCXK_INVERT_PORT		MCFGPIO_PORTE
+#define CONFIG_SYS_VCXK_INVERT_DDR		MCFGPIO_DDRE
+#define CONFIG_SYS_VCXK_INVERT_PIN		MCFGPIO_PORT2
+
+#endif	/* _CONFIG_M5282EVB_H */
+/*---------------------------------------------------------------------*/