Add submodule dependency filesHEADmaster

Change-Id: Iaf8d18082d3991dec7c0ebbea540f092188eb4ec

1 files changed, 167 insertions, 0 deletions

diff --git a/roms/u-boot/include/configs/ge_bx50v3.h b/roms/u-boot/include/configs/ge_bx50v3.h
new file mode 100644
index 000000000..c8e9d3b17
--- /dev/null
+++ b/roms/u-boot/include/configs/ge_bx50v3.h
@@ -0,0 +1,167 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2015 Timesys Corporation
+ * Copyright (C) 2015 General Electric Company
+ * Copyright (C) 2014 Advantech
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ *
+ * Configuration settings for the GE MX6Q Bx50v3 boards.
+ */
+
+#ifndef __GE_BX50V3_CONFIG_H
+#define __GE_BX50V3_CONFIG_H
+
+#include <asm/arch/imx-regs.h>
+#include <asm/mach-imx/gpio.h>
+
+#define CONFIG_BOARD_NAME	"General Electric Bx50v3"
+
+#include "mx6_common.h"
+#include <linux/sizes.h>
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+#define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)
+
+/* SATA Configs */
+#ifdef CONFIG_CMD_SATA
+#define CONFIG_SYS_SATA_MAX_DEVICE	1
+#define CONFIG_DWC_AHSATA_PORT_ID	0
+#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
+#define CONFIG_LBA48
+#endif
+
+/* USB Configs */
+#ifdef CONFIG_USB
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS	0
+
+#define CONFIG_USBD_HS
+#define CONFIG_USB_GADGET_MASS_STORAGE
+#endif
+
+/* Serial Flash */
+
+#define CONFIG_LOADADDR	0x12000000
+
+#ifdef CONFIG_CMD_NFS
+#define NETWORKBOOT \
+        "setnetworkboot=" \
+                "setenv ipaddr 172.16.2.10; setenv serverip 172.16.2.20; " \
+                "setenv gatewayip 172.16.2.20; setenv nfsserver 172.16.2.20; " \
+                "setenv netmask 255.255.255.0; setenv ethaddr ca:fe:de:ca:f0:11; " \
+                "setenv bootargs root=/dev/nfs nfsroot=${nfsserver}:/srv/nfs/,v3,tcp rw rootwait" \
+                "setenv bootargs $bootargs ip=${ipaddr}:${nfsserver}:${gatewayip}:${netmask}::eth0:off " \
+                "setenv bootargs $bootargs cma=128M bootcause=${bootcause} ${videoargs} " \
+                "setenv bootargs $bootargs systemd.mask=helix-network-defaults.service " \
+                "setenv bootargs $bootargs watchdog.handle_boot_enabled=1\0" \
+        "networkboot=" \
+                "run setnetworkboot; " \
+                "nfs ${loadaddr} /srv/nfs/fitImage; " \
+                "bootm ${loadaddr}\0" \
+
+#define CONFIG_NETWORKBOOTCOMMAND \
+	"run networkboot; " \
+
+#else
+#define NETWORKBOOT \
+
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	NETWORKBOOT \
+	"image=/boot/fitImage\0" \
+	"dev=mmc\0" \
+	"devnum=2\0" \
+	"rootdev=mmcblk0p\0" \
+	"quiet=quiet loglevel=0\0" \
+	"setargs=setenv bootargs root=/dev/${rootdev}${partnum} " \
+		"ro rootwait cma=128M " \
+		"bootcause=${bootcause} " \
+		"${quiet} " \
+		"${videoargs}" "\0" \
+	"doquiet=" \
+		"if ext2load ${dev} ${devnum}:5 0x7000A000 /boot/console; " \
+			"then setenv quiet; fi\0" \
+	"hasfirstboot=" \
+		"test -e ${dev} ${devnum}:${partnum} /boot/bootcause/firstboot\0" \
+	"swappartitions=" \
+		"setexpr partnum 3 - ${partnum}\0" \
+	"failbootcmd=" \
+		"cls; " \
+		"setcurs 5 4; " \
+		"lcdputs \"Monitor failed to start. " \
+		"Try again, or contact GE Service for support.\"; " \
+		"bootcount reset; " \
+		"while true; do sleep 1; done; \0" \
+	"altbootcmd=" \
+		"run doquiet; " \
+		"setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
+		"run hasfirstboot || setenv partnum 0; " \
+		"if test ${partnum} != 0; then " \
+			"run swappartitions loadimage doboot; " \
+		"fi; " \
+		"run failbootcmd\0" \
+	"loadimage=" \
+		"ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
+	"doboot=" \
+		"echo Booting from ${dev}:${devnum}:${partnum} ...; " \
+		"run setargs; " \
+		"bootm ${loadaddr}\0" \
+	"tryboot=" \
+		"setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
+		"run loadimage || run swappartitions && run loadimage || " \
+			"setenv partnum 0 && echo MISSING IMAGE;" \
+		"run doboot; " \
+		"run failbootcmd\0" \
+
+#define CONFIG_MMCBOOTCOMMAND \
+	"run doquiet; " \
+	"run tryboot; " \
+
+#ifdef CONFIG_CMD_NFS
+#define CONFIG_BOOTCOMMAND CONFIG_NETWORKBOOTCOMMAND
+#else
+#define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND
+#endif
+
+
+/* Miscellaneous configurable options */
+
+#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
+
+/* Physical Memory Map */
+#define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
+
+#define CONFIG_SYS_BOOTMAPSZ (256 << 20)     /* 256M */
+
+#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* environment organization */
+
+#define CONFIG_SYS_FSL_USDHC_NUM	3
+
+/* Framebuffer */
+#define CONFIG_HIDE_LOGO_VERSION
+#define CONFIG_IMX_HDMI
+#define CONFIG_IMX_VIDEO_SKIP
+
+#define CONFIG_IMX6_PWM_PER_CLK	66000000
+
+#define CONFIG_PCI_SCAN_SHOW
+#define CONFIG_PCIE_IMX
+#define CONFIG_PCIE_IMX_PERST_GPIO	IMX_GPIO_NR(7, 12)
+#define CONFIG_PCIE_IMX_POWER_GPIO	IMX_GPIO_NR(1, 5)
+
+#endif	/* __GE_BX50V3_CONFIG_H */