Add submodule dependency filesHEADmaster

Change-Id: Iaf8d18082d3991dec7c0ebbea540f092188eb4ec

1 files changed, 155 insertions, 0 deletions

diff --git a/roms/u-boot/include/configs/omap3_evm.h b/roms/u-boot/include/configs/omap3_evm.h
new file mode 100644
index 000000000..e2e871a9c
--- /dev/null
+++ b/roms/u-boot/include/configs/omap3_evm.h
@@ -0,0 +1,155 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Configuration settings for the TI OMAP3 EVM board.
+ *
+ * Copyright (C) 2006-2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Author :
+ *	Manikandan Pillai <mani.pillai@ti.com>
+ * Derived from Beagle Board and 3430 SDP code by
+ *	Richard Woodruff <r-woodruff2@ti.com>
+ *	Syed Mohammed Khasim <khasim@ti.com>
+ *
+ * Manikandan Pillai <mani.pillai@ti.com>
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <configs/ti_omap3_common.h>
+
+/*
+ * We are only ever GP parts and will utilize all of the "downloaded image"
+ * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
+ */
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+
+/* NAND */
+#if defined(CONFIG_MTD_RAW_NAND)
+#define CONFIG_SYS_FLASH_BASE		NAND_BASE
+#define CONFIG_SYS_MAX_NAND_DEVICE      1
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_COUNT      64
+#define CONFIG_SYS_NAND_PAGE_SIZE       2048
+#define CONFIG_SYS_NAND_OOBSIZE         64
+#define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
+#define CONFIG_SYS_NAND_ECCPOS          {2, 3, 4, 5, 6, 7, 8, 9,\
+                                         10, 11, 12, 13}
+#define CONFIG_SYS_NAND_ECCSIZE         512
+#define CONFIG_SYS_NAND_ECCBYTES        3
+#define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
+#define CONFIG_SYS_ENV_SECT_SIZE        SZ_128K
+/* NAND: SPL falcon mode configs */
+#if defined(CONFIG_SPL_OS_BOOT)
+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x2a0000
+#endif /* CONFIG_SPL_OS_BOOT */
+#endif /* CONFIG_MTD_RAW_NAND */
+
+#define MEM_LAYOUT_ENV_SETTINGS \
+	DEFAULT_LINUX_BOOT_ENV
+
+#define BOOTENV_DEV_LEGACY_MMC(devtypeu, devtypel, instance) \
+	"bootcmd_" #devtypel #instance "=" \
+	"setenv mmcdev " #instance "; " \
+	"run mmcboot\0"
+#define BOOTENV_DEV_NAME_LEGACY_MMC(devtypeu, devtypel, instance) \
+	#devtypel #instance " "
+
+#if defined(CONFIG_MTD_RAW_NAND)
+
+#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \
+	"bootcmd_" #devtypel #instance "=" \
+	"if test ${mtdids} = '' || test ${mtdparts} = '' ; then " \
+		"echo NAND boot disabled: No mtdids and/or mtdparts; " \
+	"else " \
+		"run nandboot; " \
+	"fi\0"
+#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \
+	#devtypel #instance " "
+
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(LEGACY_MMC, legacy_mmc, 0) \
+	func(UBIFS, ubifs, 0) \
+	func(NAND, nand, 0)
+
+#else /* !CONFIG_MTD_RAW_NAND */
+
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(LEGACY_MMC, legacy_mmc, 0)
+
+#endif /* CONFIG_MTD_RAW_NAND */
+
+#include <config_distro_bootcmd.h>
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	MEM_LAYOUT_ENV_SETTINGS \
+	"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
+	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
+	"fdt_high=0xffffffff\0" \
+	"console=ttyO0,115200n8\0" \
+	"bootdir=/boot\0" \
+	"bootenv=uEnv.txt\0" \
+	"bootfile=zImage\0" \
+	"bootpart=0:2\0" \
+	"bootubivol=rootfs\0" \
+	"bootubipart=rootfs\0" \
+	"optargs=\0" \
+	"mmcdev=0\0" \
+	"mmcpart=2\0" \
+	"mmcroot=/dev/mmcblk0p2 rw\0" \
+	"mmcrootfstype=ext4 rootwait\0" \
+	"mmcargs=setenv bootargs console=${console} " \
+		"${mtdparts} " \
+		"${optargs} " \
+		"root=${mmcroot} " \
+		"rootfstype=${mmcrootfstype}\0" \
+	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
+	"ext4bootenv=ext4load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootenv}\0" \
+	"importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
+		"env import -t ${loadaddr} ${filesize}\0" \
+	"mmcbootenv=setenv bootpart ${mmcdev}:${mmcpart}; " \
+		"mmc dev ${mmcdev}; " \
+		"if mmc rescan; then " \
+			"run loadbootenv && run importbootenv; " \
+			"run ext4bootenv && run importbootenv; " \
+			"if test -n $uenvcmd; then " \
+				"echo Running uenvcmd ...; " \
+				"run uenvcmd; " \
+			"fi; " \
+		"fi\0" \
+	"loadimage=ext4load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
+	"loaddtb=ext4load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
+	"mmcboot=run mmcbootenv; " \
+		"if run loadimage && run loaddtb; then " \
+			"echo Booting ${bootdir}/${bootfile} from mmc ${bootpart} ...; " \
+			"run mmcargs; " \
+			"if test ${bootfile} = uImage; then " \
+				"bootm ${loadaddr} - ${fdtaddr}; " \
+			"fi; " \
+			"if test ${bootfile} = zImage; then " \
+				"bootz ${loadaddr} - ${fdtaddr}; " \
+			"fi; " \
+		"fi\0" \
+	"nandroot=ubi0:rootfs ubi.mtd=rootfs rw noinitrd\0" \
+	"nandrootfstype=ubifs rootwait\0" \
+	"nandargs=setenv bootargs console=${console} " \
+		"${mtdparts} " \
+		"${optargs} " \
+		"root=${nandroot} " \
+		"rootfstype=${nandrootfstype}\0" \
+	"nandboot=if nand read ${loadaddr} kernel && nand read ${fdtaddr} dtb; then " \
+			"echo Booting uImage from NAND MTD 'kernel' partition ...; " \
+			"run nandargs; " \
+			"bootm ${loadaddr} - ${fdtaddr}; " \
+		"fi\0" \
+	BOOTENV
+
+#endif /* __CONFIG_H */