Add submodule dependency filesHEADmaster

Change-Id: Iaf8d18082d3991dec7c0ebbea540f092188eb4ec

1 files changed, 206 insertions, 0 deletions

diff --git a/roms/u-boot/include/configs/omap3_logic.h b/roms/u-boot/include/configs/omap3_logic.h
new file mode 100644
index 000000000..dd0ea2dbd
--- /dev/null
+++ b/roms/u-boot/include/configs/omap3_logic.h
@@ -0,0 +1,206 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2011 Logic Product Development <www.logicpd.com>
+ *	Peter Barada <peter.barada@logicpd.com>
+ *
+ * Configuration settings for the Logic OMAP35x/DM37x SOM LV/Torpedo
+ * reference boards.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+
+#include <configs/ti_omap3_common.h>
+
+/*
+ * We are only ever GP parts and will utilize all of the "downloaded image"
+ * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB) in
+ * order to allow for BCH8 to fit in.
+ */
+
+#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+
+/* Hardware drivers */
+
+/* I2C */
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM AT24C64      */
+
+#ifdef CONFIG_SPL_BUILD
+#undef CONFIG_USB_EHCI_OMAP
+#endif
+#ifdef CONFIG_USB_EHCI_OMAP
+#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	4
+#endif
+
+/* Board NAND Info. */
+#ifdef CONFIG_MTD_RAW_NAND
+#define CONFIG_SYS_MAX_NAND_DEVICE	1	  /* Max number of */
+						  /* NAND devices */
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_COUNT	64
+#define CONFIG_SYS_NAND_PAGE_SIZE	2048
+#define CONFIG_SYS_NAND_OOBSIZE		64
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
+#define CONFIG_SYS_NAND_ECCPOS		{2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, \
+					 13, 14, 16, 17, 18, 19, 20, 21, 22, \
+					 23, 24, 25, 26, 27, 28, 30, 31, 32, \
+					 33, 34, 35, 36, 37, 38, 39, 40, 41, \
+					 42, 44, 45, 46, 47, 48, 49, 50, 51, \
+					 52, 53, 54, 55, 56}
+
+#define CONFIG_SYS_NAND_ECCSIZE		512
+#define CONFIG_SYS_NAND_ECCBYTES	13
+#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
+#define CONFIG_SYS_NAND_MAX_OOBFREE	2
+#define CONFIG_SYS_NAND_MAX_ECCPOS	56
+#endif
+
+/* Environment information */
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	DEFAULT_LINUX_BOOT_ENV \
+	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0"	\
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
+	"mmcdev=0\0" \
+	"finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
+	"mmcrootfstype=ext4 rootwait\0" \
+	"nandroot=ubi0:rootfs rw ubi.mtd=fs noinitrd\0" \
+	"nandrootfstype=ubifs rootwait\0" \
+	"autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \
+			"if run loadbootscript; then " \
+				"run bootscript; " \
+			"else " \
+				"run defaultboot;" \
+			"fi; " \
+		"else run defaultboot; fi\0" \
+	"defaultboot=run mmcramboot\0" \
+	"consoledevice=ttyS0\0" \
+	"setconsole=setenv console ${consoledevice},${baudrate}n8\0" \
+	"dump_bootargs=echo 'Bootargs: '; echo $bootargs\0" \
+	"rotation=0\0" \
+	"vrfb_arg=if itest ${rotation} -ne 0; then " \
+		"setenv bootargs ${bootargs} omapfb.vrfb=y " \
+		"omapfb.rotate=${rotation}; " \
+		"fi\0" \
+	"optargs=ignore_loglevel early_printk no_console_suspend\0" \
+	"common_bootargs=run setconsole; setenv bootargs " \
+		"${bootargs} "\
+		"console=${console} " \
+		"${mtdparts} "\
+		"${optargs}; " \
+		"run vrfb_arg\0" \
+	"loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+	"bootscript=echo 'Running bootscript from mmc ...'; " \
+		"source ${loadaddr}\0" \
+	"loadimage=mmc rescan; " \
+		"load mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \
+	"ramdisksize=64000\0" \
+	"ramdiskimage=rootfs.ext2.gz.uboot\0" \
+	"loadramdisk=mmc rescan; " \
+		"load mmc ${mmcdev} ${rdaddr} ${ramdiskimage}\0" \
+	"ramargs=setenv bootargs "\
+		"root=/dev/ram rw ramdisk_size=${ramdisksize}\0" \
+	"mmcargs=setenv bootargs "\
+		"root=PARTUUID=${uuid} " \
+		"rootfstype=${mmcrootfstype} rw\0" \
+	"nandargs=setenv bootargs "\
+		"root=${nandroot} " \
+		"rootfstype=${nandrootfstype}\0" \
+	"nfsargs=setenv serverip ${tftpserver}; " \
+		"setenv bootargs root=/dev/nfs " \
+		"nfsroot=${nfsrootpath} " \
+		"ip=${ipaddr}:${tftpserver}:${gatewayip}:${netmask}::eth0:off\0" \
+	"nfsrootpath=/opt/nfs-exports/omap\0" \
+	"autoload=no\0" \
+	"fdtimage=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
+	"loadfdt=mmc rescan; " \
+		"load mmc ${mmcdev} ${fdtaddr} ${fdtimage}\0" \
+	"mmcbootcommon=echo Booting with DT from mmc${mmcdev} ...; " \
+		"run finduuid; "\
+		"run mmcargs; " \
+		"run common_bootargs; " \
+		"run dump_bootargs; " \
+		"run loadimage; " \
+		"run loadfdt;\0 " \
+	"mmcbootz=setenv bootfile zImage; " \
+		"run mmcbootcommon; "\
+		"bootz ${loadaddr} - ${fdtaddr}\0" \
+	"mmcboot=setenv bootfile uImage; "\
+		"run mmcbootcommon; "\
+		"bootm ${loadaddr} - ${fdtaddr}\0" \
+	"mmcrambootcommon=echo 'Booting kernel from MMC w/ramdisk...'; " \
+		"run ramargs; " \
+		"run common_bootargs; " \
+		"run dump_bootargs; " \
+		"run loadimage; " \
+		"run loadfdt; " \
+		"run loadramdisk\0" \
+	"mmcramboot=setenv bootfile uImage; " \
+		"run mmcrambootcommon; " \
+		"bootm ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
+	"mmcrambootz=setenv bootfile zImage; " \
+		"run mmcrambootcommon; " \
+		"bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
+	"tftpboot=echo 'Booting kernel/ramdisk rootfs from tftp...'; " \
+		"run ramargs; " \
+		"run common_bootargs; " \
+		"run dump_bootargs; " \
+		"tftpboot ${loadaddr} ${zimage}; " \
+		"tftpboot ${rdaddr} ${ramdiskimage}; " \
+		"bootm ${loadaddr} ${rdaddr}\0" \
+	"tftpbootz=echo 'Booting kernel NFS rootfs...'; " \
+		"dhcp;" \
+		"run nfsargs;" \
+		"run common_bootargs;" \
+		"run dump_bootargs;" \
+		"tftpboot $loadaddr zImage;" \
+		"bootz $loadaddr\0" \
+	"nandbootcommon=echo 'Booting kernel from NAND...';" \
+		"run nandargs;" \
+		"run common_bootargs;" \
+		"run dump_bootargs;" \
+		"nand read ${loadaddr} kernel;" \
+		"nand read ${fdtaddr} spl-os;\0" \
+	"nandbootz=run nandbootcommon; "\
+		"bootz ${loadaddr} - ${fdtaddr}\0"\
+	"nandboot=run nandbootcommon; "\
+		"bootm ${loadaddr} - ${fdtaddr}\0"\
+
+#define CONFIG_BOOTCOMMAND \
+	"run autoboot"
+
+/* Miscellaneous configurable options */
+
+/* memtest works on */
+
+/* FLASH and environment organization */
+
+/* **** PISMO SUPPORT *** */
+#if defined(CONFIG_CMD_NAND)
+#define CONFIG_SYS_FLASH_BASE		0x10000000
+#endif
+
+#define CONFIG_SYS_MAX_FLASH_SECT	256
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+#define CONFIG_SYS_FLASH_SIZE		0x4000000
+
+/* Monitor at start of flash */
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
+
+#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
+
+/* Defines for SPL */
+
+/* NAND: SPL falcon mode configs */
+#ifdef CONFIG_SPL_OS_BOOT
+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	0x280000
+#endif
+
+#endif /* __CONFIG_H */