Add submodule dependency filesHEADmaster

Change-Id: Iaf8d18082d3991dec7c0ebbea540f092188eb4ec

1 files changed, 94 insertions, 0 deletions

diff --git a/roms/u-boot/include/configs/sama5d3xek.h b/roms/u-boot/include/configs/sama5d3xek.h
new file mode 100644
index 000000000..44c1952b5
--- /dev/null
+++ b/roms/u-boot/include/configs/sama5d3xek.h
@@ -0,0 +1,94 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Configuation settings for the SAMA5D3xEK board.
+ *
+ * Copyright (C) 2012 - 2013 Atmel
+ *
+ * based on at91sam9m10g45ek.h by:
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "at91-sama5_common.h"
+
+/*
+ * This needs to be defined for the OHCI code to work but it is defined as
+ * ATMEL_ID_UHPHS in the CPU specific header files.
+ */
+#define ATMEL_ID_UHP			32
+
+/*
+ * Specify the clock enable bit in the PMC_SCER register.
+ */
+#define ATMEL_PMC_UHP			(1 <<  6)
+
+/* board specific (not enough SRAM) */
+#define CONFIG_SAMA5D3_LCD_BASE		0x23E00000
+
+/* NOR flash */
+#ifdef CONFIG_MTD_NOR_FLASH
+#define CONFIG_SYS_FLASH_BASE		0x10000000
+#define CONFIG_SYS_MAX_FLASH_SECT	131
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#endif
+
+/* SDRAM */
+#define CONFIG_SYS_SDRAM_BASE           0x20000000
+#define CONFIG_SYS_SDRAM_SIZE		0x20000000
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_INIT_SP_ADDR		0x318000
+#else
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
+#endif
+
+/* SerialFlash */
+
+/* NAND flash */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_BASE		0x60000000
+/* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_ALE	(1 << 21)
+/* our CLE is AD22 */
+#define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#endif
+
+/* USB */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_ATMEL_CLK_SEL_UPLL
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
+#define CONFIG_SYS_USB_OHCI_REGS_BASE		ATMEL_BASE_OHCI
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"sama5d3"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	3
+#endif
+
+#define CONFIG_SYS_LOAD_ADDR			0x22000000 /* load address */
+
+/* SPL */
+#define CONFIG_SPL_MAX_SIZE		0x18000
+#define CONFIG_SPL_BSS_START_ADDR	0x20000000
+#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
+#define CONFIG_SYS_SPL_MALLOC_START	0x20080000
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
+
+#define CONFIG_SYS_MONITOR_LEN		(512 << 10)
+
+#ifdef CONFIG_SD_BOOT
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
+#endif
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_SIZE	0x800
+#define CONFIG_SYS_NAND_PAGE_COUNT	64
+#define CONFIG_SYS_NAND_OOBSIZE		64
+#define CONFIG_SYS_NAND_BLOCK_SIZE	0x20000
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0x0
+
+#endif