Add submodule dependency filesHEADmaster

Change-Id: Iaf8d18082d3991dec7c0ebbea540f092188eb4ec

1 files changed, 106 insertions, 0 deletions

diff --git a/roms/u-boot/include/configs/topic_miami.h b/roms/u-boot/include/configs/topic_miami.h
new file mode 100644
index 000000000..c12cd7cca
--- /dev/null
+++ b/roms/u-boot/include/configs/topic_miami.h
@@ -0,0 +1,106 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2014 Topic Embedded Products
+ *
+ * Configuration for Zynq Evaluation and Development Board - Miami
+ * See zynq-common.h for Zynq common configs
+ */
+
+#ifndef __CONFIG_TOPIC_MIAMI_H
+#define __CONFIG_TOPIC_MIAMI_H
+
+
+/* Speed up boot time by ignoring the environment which we never used */
+
+#include "zynq-common.h"
+
+/* Fixup settings */
+
+/* SPL settings */
+#undef CONFIG_SPL_ETH_SUPPORT
+#undef CONFIG_SPL_MAX_FOOTPRINT
+#define CONFIG_SPL_MAX_FOOTPRINT	CONFIG_SYS_SPI_U_BOOT_OFFS
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME     "u-boot.img"
+
+/* No falcon support */
+#undef CONFIG_SPL_OS_BOOT
+
+/* FPGA commands that we don't use */
+
+/* Extras */
+
+/* Faster flash, ours may run at 108 MHz */
+#undef CONFIG_SPI_FLASH_WINBOND
+
+/* Setup proper boot sequences for Miami boards */
+
+#if defined(CONFIG_USB)
+# define EXTRA_ENV_USB \
+	"usbreset=i2c dev 1 && i2c mw 41 1 ff && i2c mw 41 3 fe && "\
+		"i2c mw 41 1 fe && i2c mw 41 1 ff\0" \
+	"usbboot=run usbreset && if usb start; then " \
+		"echo Booting from USB... && " \
+		"if load usb 0 0x1900000 ${bootscript}; then "\
+		"source 0x1900000; fi; " \
+		"load usb 0 ${kernel_addr} ${kernel_image} && " \
+		"load usb 0 ${devicetree_addr} ${devicetree_image} && " \
+		"load usb 0 ${ramdisk_load_address} ${ramdisk_image} && " \
+		"bootm ${kernel_addr} ${ramdisk_load_address} "\
+			"${devicetree_addr}; " \
+	"fi\0"
+  /* Note that addresses here should match the addresses in the env */
+# define DFU_ALT_INFO \
+	"dfu_alt_info=" \
+	"uImage ram 0x2080000 0x500000;" \
+	"devicetree.dtb ram 0x2000000 0x20000;" \
+	"uramdisk.image.gz ram 0x4000000 0x10000000\0" \
+	"dfu_ram=run usbreset && dfu 0 ram 0\0" \
+	"thor_ram=run usbreset && thordown 0 ram 0\0"
+#else
+# define EXTRA_ENV_USB
+#endif
+
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS	\
+	"kernel_image=uImage\0"	\
+	"kernel_addr=0x2080000\0" \
+	"ramdisk_image=uramdisk.image.gz\0"	\
+	"ramdisk_load_address=0x4000000\0"	\
+	"devicetree_image=devicetree.dtb\0"	\
+	"devicetree_addr=0x2000000\0"	\
+	"bitstream_image=fpga.bin\0"	\
+	"bootscript=autorun.scr\0" \
+	"loadbit_addr=0x100000\0"	\
+	"loadbootenv_addr=0x2000000\0" \
+	"kernel_size=0x440000\0"	\
+	"devicetree_size=0x10000\0"	\
+	"boot_size=0xF00000\0"	\
+	"fdt_high=0x20000000\0"	\
+	"initrd_high=0x20000000\0"	\
+	"mmc_loadbit=echo Loading bitstream from SD/MMC/eMMC to RAM.. && " \
+		"mmcinfo && " \
+		"load mmc 0 ${loadbit_addr} ${bitstream_image} && " \
+		"fpga load 0 ${loadbit_addr} ${filesize}\0" \
+	"qspiboot=echo Booting from QSPI flash... && " \
+		"sf probe && " \
+		"sf read ${devicetree_addr} 0xA0000 ${devicetree_size} && " \
+		"sf read ${kernel_addr} 0xC0000 ${kernel_size} && " \
+		"bootm ${kernel_addr} - ${devicetree_addr}\0" \
+	"sdboot=if mmcinfo; then " \
+			"setenv bootargs console=ttyPS0,115200 " \
+				"root=/dev/mmcblk0p2 rw rootfstype=ext4 " \
+				"rootwait quiet ; " \
+			"load mmc 0 ${kernel_addr} ${kernel_image}&& " \
+			"load mmc 0 ${devicetree_addr} ${devicetree_image}&& " \
+			"bootm ${kernel_addr} - ${devicetree_addr}; " \
+		"fi\0" \
+	EXTRA_ENV_USB \
+	DFU_ALT_INFO
+
+#undef CONFIG_BOOTCOMMAND
+#define CONFIG_BOOTCOMMAND	"if mmcinfo; then " \
+	"if fatload mmc 0 0x1900000 ${bootscript}; then source 0x1900000; " \
+	"fi; fi; run $modeboot"
+#undef CONFIG_DISPLAY_BOARDINFO
+
+#endif /* __CONFIG_TOPIC_MIAMI_H */