Add submodule dependency filesHEADmaster

Change-Id: Iaf8d18082d3991dec7c0ebbea540f092188eb4ec

1 files changed, 180 insertions, 0 deletions

diff --git a/roms/u-boot/include/configs/vf610twr.h b/roms/u-boot/include/configs/vf610twr.h
new file mode 100644
index 000000000..fd4c749d9
--- /dev/null
+++ b/roms/u-boot/include/configs/vf610twr.h
@@ -0,0 +1,180 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Configuration settings for the Freescale Vybrid vf610twr board.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/imx-regs.h>
+#include <linux/stringify.h>
+
+#define CONFIG_SYS_FSL_CLK
+
+#define CONFIG_MACH_TYPE		4146
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
+/* Enable passing of ATAGs */
+#define CONFIG_CMDLINE_TAG
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)
+
+/* NAND support */
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_BASE		NFC_BASE_ADDR
+
+/* Dynamic MTD partition support */
+#endif
+
+#define CONFIG_SYS_FSL_ESDHC_ADDR	0
+#define CONFIG_SYS_FSL_ESDHC_NUM	1
+
+#define CONFIG_FEC_MXC
+#define IMX_FEC_BASE			ENET_BASE_ADDR
+#define CONFIG_FEC_XCV_TYPE		RMII
+#define CONFIG_FEC_MXC_PHYADDR          0
+
+/* I2C Configs */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
+#define CONFIG_SYS_SPD_BUS_NUM		0
+
+
+#define CONFIG_SYS_LOAD_ADDR		0x82000000
+
+/* We boot from the gfxRAM area of the OCRAM. */
+#define CONFIG_BOARD_SIZE_LIMIT		520192
+
+/*
+ * We do have 128MB of memory on the Vybrid Tower board. Leave the last
+ * 16MB alone to avoid conflicts with Cortex-M4 firmwares running from
+ * DDR3. Hence, limit the memory range for image processing to 112MB
+ * using bootm_size. All of the following must be within this range.
+ * We have the default load at 32MB into DDR (for the kernel), FDT at
+ * 64MB and the ramdisk 512KB above that (allowing for hopefully never
+ * seen large trees). This allows a reasonable split between ramdisk
+ * and kernel size, where the ram disk can be a bit larger.
+ */
+#define MEM_LAYOUT_ENV_SETTINGS \
+	"bootm_size=0x07000000\0" \
+	"loadaddr=0x82000000\0" \
+	"kernel_addr_r=0x82000000\0" \
+	"fdt_addr=0x84000000\0" \
+	"fdt_addr_r=0x84000000\0" \
+	"rdaddr=0x84080000\0" \
+	"ramdisk_addr_r=0x84080000\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	MEM_LAYOUT_ENV_SETTINGS \
+	"script=boot.scr\0" \
+	"image=zImage\0" \
+	"console=ttyLP1\0" \
+	"fdt_file=vf610-twr.dtb\0" \
+	"boot_fdt=try\0" \
+	"ip_dyn=yes\0" \
+	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
+	"mmcpart=1\0" \
+	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
+	"update_sd_firmware_filename=u-boot.imx\0" \
+	"update_sd_firmware=" \
+		"if test ${ip_dyn} = yes; then " \
+			"setenv get_cmd dhcp; " \
+		"else " \
+			"setenv get_cmd tftp; " \
+		"fi; " \
+		"if mmc dev ${mmcdev}; then "	\
+			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
+				"setexpr fw_sz ${filesize} / 0x200; " \
+				"setexpr fw_sz ${fw_sz} + 1; "	\
+				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
+			"fi; "	\
+		"fi\0" \
+	"mmcargs=setenv bootargs console=${console},${baudrate} " \
+		"root=${mmcroot}\0" \
+	"loadbootscript=" \
+		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+	"bootscript=echo Running bootscript from mmc ...; " \
+		"source\0" \
+	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+	"mmcboot=echo Booting from mmc ...; " \
+		"run mmcargs; " \
+		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+			"if run loadfdt; then " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
+			"else " \
+				"if test ${boot_fdt} = try; then " \
+					"bootz; " \
+				"else " \
+					"echo WARN: Cannot load the DT; " \
+				"fi; " \
+			"fi; " \
+		"else " \
+			"bootz; " \
+		"fi;\0" \
+	"netargs=setenv bootargs console=${console},${baudrate} " \
+		"root=/dev/nfs " \
+	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+		"netboot=echo Booting from net ...; " \
+		"run netargs; " \
+		"if test ${ip_dyn} = yes; then " \
+			"setenv get_cmd dhcp; " \
+		"else " \
+			"setenv get_cmd tftp; " \
+		"fi; " \
+		"${get_cmd} ${image}; " \
+		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
+			"else " \
+				"if test ${boot_fdt} = try; then " \
+					"bootz; " \
+				"else " \
+					"echo WARN: Cannot load the DT; " \
+				"fi; " \
+			"fi; " \
+		"else " \
+			"bootz; " \
+		"fi;\0"
+
+#define CONFIG_BOOTCOMMAND \
+	   "mmc dev ${mmcdev}; if mmc rescan; then " \
+		   "if run loadbootscript; then " \
+			   "run bootscript; " \
+		   "else " \
+			   "if run loadimage; then " \
+				   "run mmcboot; " \
+			   "else run netboot; " \
+			   "fi; " \
+		   "fi; " \
+	   "else run netboot; fi"
+
+/* Miscellaneous configurable options */
+
+/* Physical memory map */
+#define PHYS_SDRAM			(0x80000000)
+#define PHYS_SDRAM_SIZE			(128 * 1024 * 1024)
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+#ifdef CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_RANGE		(512 * 1024)
+#endif
+
+#endif