Add submodule dependency filesHEADmaster

Change-Id: Iaf8d18082d3991dec7c0ebbea540f092188eb4ec

1 files changed, 272 insertions, 0 deletions

diff --git a/roms/u-boot/include/configs/zynq-common.h b/roms/u-boot/include/configs/zynq-common.h
new file mode 100644
index 000000000..39035f8be
--- /dev/null
+++ b/roms/u-boot/include/configs/zynq-common.h
@@ -0,0 +1,272 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2012 Michal Simek <monstr@monstr.eu>
+ * (C) Copyright 2013 - 2018 Xilinx, Inc.
+ *
+ * Common configuration options for all Zynq boards.
+ */
+
+#ifndef __CONFIG_ZYNQ_COMMON_H
+#define __CONFIG_ZYNQ_COMMON_H
+
+/* CPU clock */
+#ifndef CONFIG_CPU_FREQ_HZ
+# define CONFIG_CPU_FREQ_HZ	800000000
+#endif
+
+#define CONFIG_REMAKE_ELF
+
+/* Cache options */
+#define CONFIG_SYS_L2CACHE_OFF
+#ifndef CONFIG_SYS_L2CACHE_OFF
+# define CONFIG_SYS_L2_PL310
+# define CONFIG_SYS_PL310_BASE		0xf8f02000
+#endif
+
+#define ZYNQ_SCUTIMER_BASEADDR		0xF8F00600
+#define CONFIG_SYS_TIMERBASE		ZYNQ_SCUTIMER_BASEADDR
+#define CONFIG_SYS_TIMER_COUNTS_DOWN
+#define CONFIG_SYS_TIMER_COUNTER	(CONFIG_SYS_TIMERBASE + 0x4)
+
+/* Serial drivers */
+/* The following table includes the supported baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE  \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+
+/* Ethernet driver */
+#if defined(CONFIG_ZYNQ_GEM)
+# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+# define CONFIG_BOOTP_MAY_FAIL
+#endif
+
+/* NOR */
+#ifdef CONFIG_MTD_NOR_FLASH
+# define CONFIG_SYS_MAX_FLASH_BANKS	1
+# define CONFIG_SYS_MAX_FLASH_SECT	512
+# define CONFIG_SYS_FLASH_ERASE_TOUT	1000
+# define CONFIG_SYS_FLASH_WRITE_TOUT	5000
+# define CONFIG_FLASH_SHOW_PROGRESS	10
+# undef CONFIG_SYS_FLASH_EMPTY_INFO
+# define CONFIG_SYS_FLASH_QUIET_TEST
+#endif
+
+#ifdef CONFIG_NAND_ZYNQ
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#endif
+
+#ifdef CONFIG_USB_EHCI_ZYNQ
+# define CONFIG_EHCI_IS_TDI
+
+# define CONFIG_SYS_DFU_DATA_BUF_SIZE	0x600000
+# define DFU_DEFAULT_POLL_TIMEOUT	300
+# define CONFIG_THOR_RESET_OFF
+#endif
+
+/* enable preboot to be loaded before CONFIG_BOOTDELAY */
+
+/* Boot configuration */
+#define CONFIG_SYS_LOAD_ADDR		0 /* default? */
+
+#ifdef CONFIG_SPL_BUILD
+#define BOOTENV
+#else
+
+#ifdef CONFIG_CMD_MMC
+#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1)
+#else
+#define BOOT_TARGET_DEVICES_MMC(func)
+#endif
+
+#ifdef CONFIG_CMD_USB
+#define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) func(USB, usb, 1)
+#else
+#define BOOT_TARGET_DEVICES_USB(func)
+#endif
+
+#if defined(CONFIG_CMD_PXE) && defined(CONFIG_CMD_DHCP)
+#define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na)
+#else
+#define BOOT_TARGET_DEVICES_PXE(func)
+#endif
+
+#if defined(CONFIG_CMD_DHCP)
+#define BOOT_TARGET_DEVICES_DHCP(func) func(DHCP, dhcp, na)
+#else
+#define BOOT_TARGET_DEVICES_DHCP(func)
+#endif
+
+#if defined(CONFIG_ZYNQ_QSPI)
+# define BOOT_TARGET_DEVICES_QSPI(func)	func(QSPI, qspi, na)
+#else
+# define BOOT_TARGET_DEVICES_QSPI(func)
+#endif
+
+#if defined(CONFIG_NAND_ZYNQ)
+# define BOOT_TARGET_DEVICES_NAND(func)	func(NAND, nand, na)
+#else
+# define BOOT_TARGET_DEVICES_NAND(func)
+#endif
+
+#if defined(CONFIG_MTD_NOR_FLASH)
+# define BOOT_TARGET_DEVICES_NOR(func)	func(NOR, nor, na)
+#else
+# define BOOT_TARGET_DEVICES_NOR(func)
+#endif
+
+#define BOOTENV_DEV_QSPI(devtypeu, devtypel, instance) \
+	"bootcmd_qspi=sf probe 0 0 0 && " \
+		      "sf read ${scriptaddr} ${script_offset_f} ${script_size_f} && " \
+		      "echo QSPI: Trying to boot script at ${scriptaddr} && " \
+		      "source ${scriptaddr}; echo QSPI: SCRIPT FAILED: continuing...;\0"
+
+#define BOOTENV_DEV_NAME_QSPI(devtypeu, devtypel, instance) \
+	"qspi "
+
+#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \
+	"bootcmd_nand=nand info && " \
+		      "nand read ${scriptaddr} ${script_offset_f} ${script_size_f} && " \
+		      "echo NAND: Trying to boot script at ${scriptaddr} && " \
+		      "source ${scriptaddr}; echo NAND: SCRIPT FAILED: continuing...;\0"
+
+#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \
+	"nand "
+
+#define BOOTENV_DEV_NOR(devtypeu, devtypel, instance) \
+	"script_offset_nor=0xE2FC0000\0"        \
+	"bootcmd_nor=cp.b ${script_offset_nor} ${scriptaddr} ${script_size_f} && " \
+		     "echo NOR: Trying to boot script at ${scriptaddr} && " \
+		     "source ${scriptaddr}; echo NOR: SCRIPT FAILED: continuing...;\0"
+
+#define BOOTENV_DEV_NAME_NOR(devtypeu, devtypel, instance) \
+	"nor "
+
+#define BOOT_TARGET_DEVICES_JTAG(func)  func(JTAG, jtag, na)
+
+#define BOOTENV_DEV_JTAG(devtypeu, devtypel, instance) \
+	"bootcmd_jtag=echo JTAG: Trying to boot script at ${scriptaddr} && " \
+		"source ${scriptaddr}; echo JTAG: SCRIPT FAILED: continuing...;\0"
+
+#define BOOTENV_DEV_NAME_JTAG(devtypeu, devtypel, instance) \
+	"jtag "
+
+#define BOOT_TARGET_DEVICES_USB_DFU(func) \
+	func(USB_DFU, usb_dfu, 0) func(USB_DFU, usb_dfu, 1)
+
+#define BOOTENV_DEV_USB_DFU(devtypeu, devtypel, instance) \
+	"bootcmd_" #devtypel #instance "=setenv dfu_alt_info boot.scr ram " \
+	"$scriptaddr $script_size_f && " \
+	"dfu " #instance " ram " #instance " 60 && " \
+	"echo DFU" #instance ": Trying to boot script at ${scriptaddr} && " \
+	"source ${scriptaddr}; " \
+	"echo DFU" #instance ": SCRIPT FAILED: continuing...;\0"
+
+#define BOOTENV_DEV_NAME_USB_DFU(devtypeu, devtypel, instance) \
+	""
+
+#define BOOT_TARGET_DEVICES_USB_THOR(func) \
+	func(USB_THOR, usb_thor, 0) func(USB_THOR, usb_thor, 1)
+
+#define BOOTENV_DEV_USB_THOR(devtypeu, devtypel, instance) \
+	"bootcmd_" #devtypel #instance "=setenv dfu_alt_info boot.scr ram " \
+	"$scriptaddr $script_size_f && " \
+	"thordown " #instance " ram " #instance " && " \
+	"echo THOR" #instance ": Trying to boot script at ${scriptaddr} && " \
+	"source ${scriptaddr}; " \
+	"echo THOR" #instance ": SCRIPT FAILED: continuing...;\0"
+
+#define BOOTENV_DEV_NAME_USB_THOR(devtypeu, devtypel, instance) \
+	""
+
+#define BOOT_TARGET_DEVICES(func) \
+	BOOT_TARGET_DEVICES_JTAG(func) \
+	BOOT_TARGET_DEVICES_MMC(func) \
+	BOOT_TARGET_DEVICES_QSPI(func) \
+	BOOT_TARGET_DEVICES_NAND(func) \
+	BOOT_TARGET_DEVICES_NOR(func) \
+	BOOT_TARGET_DEVICES_USB_DFU(func) \
+	BOOT_TARGET_DEVICES_USB_THOR(func) \
+	BOOT_TARGET_DEVICES_USB(func) \
+	BOOT_TARGET_DEVICES_PXE(func) \
+	BOOT_TARGET_DEVICES_DHCP(func)
+
+#include <config_distro_bootcmd.h>
+#endif /* CONFIG_SPL_BUILD */
+
+/* Default environment */
+#ifndef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS	\
+	"scriptaddr=0x20000\0"	\
+	"script_size_f=0x40000\0"	\
+	"fdt_addr_r=0x1f00000\0"        \
+	"pxefile_addr_r=0x2000000\0"    \
+	"kernel_addr_r=0x2000000\0"     \
+	"scriptaddr=0x3000000\0"        \
+	"ramdisk_addr_r=0x3100000\0"    \
+	BOOTENV
+#endif
+
+/* Miscellaneous configurable options */
+
+#define CONFIG_CLOCKS
+#define CONFIG_SYS_MAXARGS		32 /* max number of command args */
+#define CONFIG_SYS_CBSIZE		2048 /* Console I/O Buffer Size */
+
+#define CONFIG_SYS_INIT_RAM_ADDR	0xFFFF0000
+#define CONFIG_SYS_INIT_RAM_SIZE	0x2000
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
+					CONFIG_SYS_INIT_RAM_SIZE - \
+					GENERATED_GBL_DATA_SIZE)
+
+
+/* Extend size of kernel image for uncompression */
+#define CONFIG_SYS_BOOTM_LEN	(60 * 1024 * 1024)
+
+/* Boot FreeBSD/vxWorks from an ELF image */
+#define CONFIG_SYS_MMC_MAX_DEVICE	1
+
+/* MMC support */
+#ifdef CONFIG_MMC_SDHCI_ZYNQ
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME     "u-boot.img"
+#endif
+
+/* Address in RAM where the parameters must be copied by SPL. */
+#define CONFIG_SYS_SPL_ARGS_ADDR	0x10000000
+
+#define CONFIG_SPL_FS_LOAD_ARGS_NAME		"system.dtb"
+#define CONFIG_SPL_FS_LOAD_KERNEL_NAME		"uImage"
+
+/* Not using MMC raw mode - just for compilation purpose */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	0
+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0
+
+/* qspi mode is working fine */
+#ifdef CONFIG_ZYNQ_QSPI
+#define CONFIG_SYS_SPI_ARGS_OFFS	0x200000
+#define CONFIG_SYS_SPI_ARGS_SIZE	0x80000
+#define CONFIG_SYS_SPI_KERNEL_OFFS	(CONFIG_SYS_SPI_ARGS_OFFS + \
+					CONFIG_SYS_SPI_ARGS_SIZE)
+#endif
+
+/* SP location before relocation, must use scratch RAM */
+
+/* 3 * 64kB blocks of OCM - one is on the top because of bootrom */
+#define CONFIG_SPL_MAX_SIZE	0x30000
+
+/* On the top of OCM space */
+#define CONFIG_SYS_SPL_MALLOC_START	CONFIG_SPL_STACK_R_ADDR
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x2000000
+
+/*
+ * SPL stack position - and stack goes down
+ * 0xfffffe00 is used for putting wfi loop.
+ * Set it up as limit for now.
+ */
+#define CONFIG_SPL_STACK	0xfffffe00
+
+/* BSS setup */
+#define CONFIG_SPL_BSS_START_ADDR	0x100000
+#define CONFIG_SPL_BSS_MAX_SIZE		0x100000
+
+#endif /* __CONFIG_ZYNQ_COMMON_H */