Add submodule dependency filesHEADmaster

Change-Id: Iaf8d18082d3991dec7c0ebbea540f092188eb4ec

1 files changed, 102 insertions, 0 deletions

diff --git a/roms/u-boot/include/status_led.h b/roms/u-boot/include/status_led.h
new file mode 100644
index 000000000..6707ab1d2
--- /dev/null
+++ b/roms/u-boot/include/status_led.h
@@ -0,0 +1,102 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ */
+
+/*
+ * The purpose of this code is to signal the operational status of a
+ * target which usually boots over the network; while running in
+ * PCBoot, a status LED is blinking. As soon as a valid BOOTP reply
+ * message has been received, the LED is turned off. The Linux
+ * kernel, once it is running, will start blinking the LED again,
+ * with another frequency.
+ */
+
+#ifndef _STATUS_LED_H_
+#define	_STATUS_LED_H_
+
+#ifdef CONFIG_LED_STATUS
+
+#define LED_STATUS_PERIOD	(CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ)
+#ifdef CONFIG_LED_STATUS1
+#define LED_STATUS_PERIOD1	(CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ1)
+#endif /* CONFIG_LED_STATUS1 */
+#ifdef CONFIG_LED_STATUS2
+#define LED_STATUS_PERIOD2	(CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ2)
+#endif /* CONFIG_LED_STATUS2 */
+#ifdef CONFIG_LED_STATUS3
+#define LED_STATUS_PERIOD3	(CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ3)
+#endif /* CONFIG_LED_STATUS3 */
+#ifdef CONFIG_LED_STATUS4
+#define LED_STATUS_PERIOD4	(CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ4)
+#endif /* CONFIG_LED_STATUS4 */
+#ifdef CONFIG_LED_STATUS5
+#define LED_STATUS_PERIOD5	(CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ5)
+#endif /* CONFIG_LED_STATUS5 */
+
+void status_led_init(void);
+void status_led_tick(unsigned long timestamp);
+void status_led_set(int led, int state);
+
+/*****  MVS v1  **********************************************************/
+#if (defined(CONFIG_MVS) && CONFIG_MVS < 2)
+# define STATUS_LED_PAR		im_ioport.iop_pdpar
+# define STATUS_LED_DIR		im_ioport.iop_pddir
+# undef  STATUS_LED_ODR
+# define STATUS_LED_DAT		im_ioport.iop_pddat
+
+# define STATUS_LED_ACTIVE	1		/* LED on for bit == 1	*/
+
+/*****  Someone else defines these  *************************************/
+#elif defined(STATUS_LED_PAR)
+  /*
+   * ADVICE: Define in your board configuration file rather than
+   * filling this file up with lots of custom board stuff.
+   */
+
+#elif defined(CONFIG_LED_STATUS_BOARD_SPECIFIC)
+/* led_id_t is unsigned long mask */
+typedef unsigned long led_id_t;
+
+extern void __led_toggle (led_id_t mask);
+extern void __led_init (led_id_t mask, int state);
+extern void __led_set (led_id_t mask, int state);
+void __led_blink(led_id_t mask, int freq);
+#else
+# error Status LED configuration missing
+#endif
+/************************************************************************/
+
+#ifndef CONFIG_LED_STATUS_BOARD_SPECIFIC
+# include <asm/status_led.h>
+#endif
+
+#endif	/* CONFIG_LED_STATUS	*/
+
+/*
+ * Coloured LEDs API
+ */
+#ifndef	__ASSEMBLY__
+void coloured_LED_init(void);
+void red_led_on(void);
+void red_led_off(void);
+void green_led_on(void);
+void green_led_off(void);
+void yellow_led_on(void);
+void yellow_led_off(void);
+void blue_led_on(void);
+void blue_led_off(void);
+#else
+	.extern LED_init
+	.extern red_led_on
+	.extern red_led_off
+	.extern yellow_led_on
+	.extern yellow_led_off
+	.extern green_led_on
+	.extern green_led_off
+	.extern blue_led_on
+	.extern blue_led_off
+#endif
+
+#endif	/* _STATUS_LED_H_	*/