diff options
Diffstat (limited to 'docs/system/devices')
| -rw-r--r-- | docs/system/devices/ivshmem.rst | 64 | ||||
| -rw-r--r-- | docs/system/devices/net.rst | 100 | ||||
| -rw-r--r-- | docs/system/devices/nvme.rst | 241 | ||||
| -rw-r--r-- | docs/system/devices/usb.rst | 351 | ||||
| -rw-r--r-- | docs/system/devices/vhost-user-rng.rst | 39 | ||||
| -rw-r--r-- | docs/system/devices/vhost-user.rst | 59 | ||||
| -rw-r--r-- | docs/system/devices/virtio-pmem.rst | 76 |
7 files changed, 930 insertions, 0 deletions
diff --git a/docs/system/devices/ivshmem.rst b/docs/system/devices/ivshmem.rst new file mode 100644 index 000000000..b03a48afa --- /dev/null +++ b/docs/system/devices/ivshmem.rst @@ -0,0 +1,64 @@ +.. _pcsys_005fivshmem: + +Inter-VM Shared Memory device +----------------------------- + +On Linux hosts, a shared memory device is available. The basic syntax +is: + +.. parsed-literal:: + + |qemu_system_x86| -device ivshmem-plain,memdev=hostmem + +where hostmem names a host memory backend. For a POSIX shared memory +backend, use something like + +:: + + -object memory-backend-file,size=1M,share,mem-path=/dev/shm/ivshmem,id=hostmem + +If desired, interrupts can be sent between guest VMs accessing the same +shared memory region. Interrupt support requires using a shared memory +server and using a chardev socket to connect to it. The code for the +shared memory server is qemu.git/contrib/ivshmem-server. An example +syntax when using the shared memory server is: + +.. parsed-literal:: + + # First start the ivshmem server once and for all + ivshmem-server -p pidfile -S path -m shm-name -l shm-size -n vectors + + # Then start your qemu instances with matching arguments + |qemu_system_x86| -device ivshmem-doorbell,vectors=vectors,chardev=id + -chardev socket,path=path,id=id + +When using the server, the guest will be assigned a VM ID (>=0) that +allows guests using the same server to communicate via interrupts. +Guests can read their VM ID from a device register (see +ivshmem-spec.txt). + +Migration with ivshmem +~~~~~~~~~~~~~~~~~~~~~~ + +With device property ``master=on``, the guest will copy the shared +memory on migration to the destination host. With ``master=off``, the +guest will not be able to migrate with the device attached. In the +latter case, the device should be detached and then reattached after +migration using the PCI hotplug support. + +At most one of the devices sharing the same memory can be master. The +master must complete migration before you plug back the other devices. + +ivshmem and hugepages +~~~~~~~~~~~~~~~~~~~~~ + +Instead of specifying the <shm size> using POSIX shm, you may specify a +memory backend that has hugepage support: + +.. parsed-literal:: + + |qemu_system_x86| -object memory-backend-file,size=1G,mem-path=/dev/hugepages/my-shmem-file,share,id=mb1 + -device ivshmem-plain,memdev=mb1 + +ivshmem-server also supports hugepages mount points with the ``-m`` +memory path argument. diff --git a/docs/system/devices/net.rst b/docs/system/devices/net.rst new file mode 100644 index 000000000..4b2640c44 --- /dev/null +++ b/docs/system/devices/net.rst @@ -0,0 +1,100 @@ +.. _pcsys_005fnetwork: + +Network emulation +----------------- + +QEMU can simulate several network cards (e.g. PCI or ISA cards on the PC +target) and can connect them to a network backend on the host or an +emulated hub. The various host network backends can either be used to +connect the NIC of the guest to a real network (e.g. by using a TAP +devices or the non-privileged user mode network stack), or to other +guest instances running in another QEMU process (e.g. by using the +socket host network backend). + +Using TAP network interfaces +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +This is the standard way to connect QEMU to a real network. QEMU adds a +virtual network device on your host (called ``tapN``), and you can then +configure it as if it was a real ethernet card. + +Linux host +^^^^^^^^^^ + +As an example, you can download the ``linux-test-xxx.tar.gz`` archive +and copy the script ``qemu-ifup`` in ``/etc`` and configure properly +``sudo`` so that the command ``ifconfig`` contained in ``qemu-ifup`` can +be executed as root. You must verify that your host kernel supports the +TAP network interfaces: the device ``/dev/net/tun`` must be present. + +See :ref:`sec_005finvocation` to have examples of command +lines using the TAP network interfaces. + +Windows host +^^^^^^^^^^^^ + +There is a virtual ethernet driver for Windows 2000/XP systems, called +TAP-Win32. But it is not included in standard QEMU for Windows, so you +will need to get it separately. It is part of OpenVPN package, so +download OpenVPN from : https://openvpn.net/. + +Using the user mode network stack +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +By using the option ``-net user`` (default configuration if no ``-net`` +option is specified), QEMU uses a completely user mode network stack +(you don't need root privilege to use the virtual network). The virtual +network configuration is the following:: + + guest (10.0.2.15) <------> Firewall/DHCP server <-----> Internet + | (10.0.2.2) + | + ----> DNS server (10.0.2.3) + | + ----> SMB server (10.0.2.4) + +The QEMU VM behaves as if it was behind a firewall which blocks all +incoming connections. You can use a DHCP client to automatically +configure the network in the QEMU VM. The DHCP server assign addresses +to the hosts starting from 10.0.2.15. + +In order to check that the user mode network is working, you can ping +the address 10.0.2.2 and verify that you got an address in the range +10.0.2.x from the QEMU virtual DHCP server. + +Note that ICMP traffic in general does not work with user mode +networking. ``ping``, aka. ICMP echo, to the local router (10.0.2.2) +shall work, however. If you're using QEMU on Linux >= 3.0, it can use +unprivileged ICMP ping sockets to allow ``ping`` to the Internet. The +host admin has to set the ping_group_range in order to grant access to +those sockets. To allow ping for GID 100 (usually users group):: + + echo 100 100 > /proc/sys/net/ipv4/ping_group_range + +When using the built-in TFTP server, the router is also the TFTP server. + +When using the ``'-netdev user,hostfwd=...'`` option, TCP or UDP +connections can be redirected from the host to the guest. It allows for +example to redirect X11, telnet or SSH connections. + +Hubs +~~~~ + +QEMU can simulate several hubs. A hub can be thought of as a virtual +connection between several network devices. These devices can be for +example QEMU virtual ethernet cards or virtual Host ethernet devices +(TAP devices). You can connect guest NICs or host network backends to +such a hub using the ``-netdev +hubport`` or ``-nic hubport`` options. The legacy ``-net`` option also +connects the given device to the emulated hub with ID 0 (i.e. the +default hub) unless you specify a netdev with ``-net nic,netdev=xxx`` +here. + +Connecting emulated networks between QEMU instances +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Using the ``-netdev socket`` (or ``-nic socket`` or ``-net socket``) +option, it is possible to create emulated networks that span several +QEMU instances. See the description of the ``-netdev socket`` option in +:ref:`sec_005finvocation` to have a basic +example. diff --git a/docs/system/devices/nvme.rst b/docs/system/devices/nvme.rst new file mode 100644 index 000000000..b5acb2a9c --- /dev/null +++ b/docs/system/devices/nvme.rst @@ -0,0 +1,241 @@ +============== +NVMe Emulation +============== + +QEMU provides NVMe emulation through the ``nvme``, ``nvme-ns`` and +``nvme-subsys`` devices. + +See the following sections for specific information on + + * `Adding NVMe Devices`_, `additional namespaces`_ and `NVM subsystems`_. + * Configuration of `Optional Features`_ such as `Controller Memory Buffer`_, + `Simple Copy`_, `Zoned Namespaces`_, `metadata`_ and `End-to-End Data + Protection`_, + +Adding NVMe Devices +=================== + +Controller Emulation +-------------------- + +The QEMU emulated NVMe controller implements version 1.4 of the NVM Express +specification. All mandatory features are implement with a couple of exceptions +and limitations: + + * Accounting numbers in the SMART/Health log page are reset when the device + is power cycled. + * Interrupt Coalescing is not supported and is disabled by default. + +The simplest way to attach an NVMe controller on the QEMU PCI bus is to add the +following parameters: + +.. code-block:: console + + -drive file=nvm.img,if=none,id=nvm + -device nvme,serial=deadbeef,drive=nvm + +There are a number of optional general parameters for the ``nvme`` device. Some +are mentioned here, but see ``-device nvme,help`` to list all possible +parameters. + +``max_ioqpairs=UINT32`` (default: ``64``) + Set the maximum number of allowed I/O queue pairs. This replaces the + deprecated ``num_queues`` parameter. + +``msix_qsize=UINT16`` (default: ``65``) + The number of MSI-X vectors that the device should support. + +``mdts=UINT8`` (default: ``7``) + Set the Maximum Data Transfer Size of the device. + +``use-intel-id`` (default: ``off``) + Since QEMU 5.2, the device uses a QEMU allocated "Red Hat" PCI Device and + Vendor ID. Set this to ``on`` to revert to the unallocated Intel ID + previously used. + +Additional Namespaces +--------------------- + +In the simplest possible invocation sketched above, the device only support a +single namespace with the namespace identifier ``1``. To support multiple +namespaces and additional features, the ``nvme-ns`` device must be used. + +.. code-block:: console + + -device nvme,id=nvme-ctrl-0,serial=deadbeef + -drive file=nvm-1.img,if=none,id=nvm-1 + -device nvme-ns,drive=nvm-1 + -drive file=nvm-2.img,if=none,id=nvm-2 + -device nvme-ns,drive=nvm-2 + +The namespaces defined by the ``nvme-ns`` device will attach to the most +recently defined ``nvme-bus`` that is created by the ``nvme`` device. Namespace +identifiers are allocated automatically, starting from ``1``. + +There are a number of parameters available: + +``nsid`` (default: ``0``) + Explicitly set the namespace identifier. + +``uuid`` (default: *autogenerated*) + Set the UUID of the namespace. This will be reported as a "Namespace UUID" + descriptor in the Namespace Identification Descriptor List. + +``eui64`` + Set the EUI-64 of the namespace. This will be reported as a "IEEE Extended + Unique Identifier" descriptor in the Namespace Identification Descriptor List. + Since machine type 6.1 a non-zero default value is used if the parameter + is not provided. For earlier machine types the field defaults to 0. + +``bus`` + If there are more ``nvme`` devices defined, this parameter may be used to + attach the namespace to a specific ``nvme`` device (identified by an ``id`` + parameter on the controller device). + +NVM Subsystems +-------------- + +Additional features becomes available if the controller device (``nvme``) is +linked to an NVM Subsystem device (``nvme-subsys``). + +The NVM Subsystem emulation allows features such as shared namespaces and +multipath I/O. + +.. code-block:: console + + -device nvme-subsys,id=nvme-subsys-0,nqn=subsys0 + -device nvme,serial=a,subsys=nvme-subsys-0 + -device nvme,serial=b,subsys=nvme-subsys-0 + +This will create an NVM subsystem with two controllers. Having controllers +linked to an ``nvme-subsys`` device allows additional ``nvme-ns`` parameters: + +``shared`` (default: ``on`` since 6.2) + Specifies that the namespace will be attached to all controllers in the + subsystem. If set to ``off``, the namespace will remain a private namespace + and may only be attached to a single controller at a time. Shared namespaces + are always automatically attached to all controllers (also when controllers + are hotplugged). + +``detached`` (default: ``off``) + If set to ``on``, the namespace will be be available in the subsystem, but + not attached to any controllers initially. A shared namespace with this set + to ``on`` will never be automatically attached to controllers. + +Thus, adding + +.. code-block:: console + + -drive file=nvm-1.img,if=none,id=nvm-1 + -device nvme-ns,drive=nvm-1,nsid=1 + -drive file=nvm-2.img,if=none,id=nvm-2 + -device nvme-ns,drive=nvm-2,nsid=3,shared=off,detached=on + +will cause NSID 1 will be a shared namespace that is initially attached to both +controllers. NSID 3 will be a private namespace due to ``shared=off`` and only +attachable to a single controller at a time. Additionally it will not be +attached to any controller initially (due to ``detached=on``) or to hotplugged +controllers. + +Optional Features +================= + +Controller Memory Buffer +------------------------ + +``nvme`` device parameters related to the Controller Memory Buffer support: + +``cmb_size_mb=UINT32`` (default: ``0``) + This adds a Controller Memory Buffer of the given size at offset zero in BAR + 2. + +``legacy-cmb`` (default: ``off``) + By default, the device uses the "v1.4 scheme" for the Controller Memory + Buffer support (i.e, the CMB is initially disabled and must be explicitly + enabled by the host). Set this to ``on`` to behave as a v1.3 device wrt. the + CMB. + +Simple Copy +----------- + +The device includes support for TP 4065 ("Simple Copy Command"). A number of +additional ``nvme-ns`` device parameters may be used to control the Copy +command limits: + +``mssrl=UINT16`` (default: ``128``) + Set the Maximum Single Source Range Length (``MSSRL``). This is the maximum + number of logical blocks that may be specified in each source range. + +``mcl=UINT32`` (default: ``128``) + Set the Maximum Copy Length (``MCL``). This is the maximum number of logical + blocks that may be specified in a Copy command (the total for all source + ranges). + +``msrc=UINT8`` (default: ``127``) + Set the Maximum Source Range Count (``MSRC``). This is the maximum number of + source ranges that may be used in a Copy command. This is a 0's based value. + +Zoned Namespaces +---------------- + +A namespaces may be "Zoned" as defined by TP 4053 ("Zoned Namespaces"). Set +``zoned=on`` on an ``nvme-ns`` device to configure it as a zoned namespace. + +The namespace may be configured with additional parameters + +``zoned.zone_size=SIZE`` (default: ``128MiB``) + Define the zone size (``ZSZE``). + +``zoned.zone_capacity=SIZE`` (default: ``0``) + Define the zone capacity (``ZCAP``). If left at the default (``0``), the zone + capacity will equal the zone size. + +``zoned.descr_ext_size=UINT32`` (default: ``0``) + Set the Zone Descriptor Extension Size (``ZDES``). Must be a multiple of 64 + bytes. + +``zoned.cross_read=BOOL`` (default: ``off``) + Set to ``on`` to allow reads to cross zone boundaries. + +``zoned.max_active=UINT32`` (default: ``0``) + Set the maximum number of active resources (``MAR``). The default (``0``) + allows all zones to be active. + +``zoned.max_open=UINT32`` (default: ``0``) + Set the maximum number of open resources (``MOR``). The default (``0``) + allows all zones to be open. If ``zoned.max_active`` is specified, this value + must be less than or equal to that. + +``zoned.zasl=UINT8`` (default: ``0``) + Set the maximum data transfer size for the Zone Append command. Like + ``mdts``, the value is specified as a power of two (2^n) and is in units of + the minimum memory page size (CAP.MPSMIN). The default value (``0``) + has this property inherit the ``mdts`` value. + +Metadata +-------- + +The virtual namespace device supports LBA metadata in the form separate +metadata (``MPTR``-based) and extended LBAs. + +``ms=UINT16`` (default: ``0``) + Defines the number of metadata bytes per LBA. + +``mset=UINT8`` (default: ``0``) + Set to ``1`` to enable extended LBAs. + +End-to-End Data Protection +-------------------------- + +The virtual namespace device supports DIF- and DIX-based protection information +(depending on ``mset``). + +``pi=UINT8`` (default: ``0``) + Enable protection information of the specified type (type ``1``, ``2`` or + ``3``). + +``pil=UINT8`` (default: ``0``) + Controls the location of the protection information within the metadata. Set + to ``1`` to transfer protection information as the first eight bytes of + metadata. Otherwise, the protection information is transferred as the last + eight bytes. diff --git a/docs/system/devices/usb.rst b/docs/system/devices/usb.rst new file mode 100644 index 000000000..afb7d6c22 --- /dev/null +++ b/docs/system/devices/usb.rst @@ -0,0 +1,351 @@ +.. _pcsys_005fusb: + +USB emulation +------------- + +QEMU can emulate a PCI UHCI, OHCI, EHCI or XHCI USB controller. You can +plug virtual USB devices or real host USB devices (only works with +certain host operating systems). QEMU will automatically create and +connect virtual USB hubs as necessary to connect multiple USB devices. + +USB controllers +~~~~~~~~~~~~~~~ + +XHCI controller support +^^^^^^^^^^^^^^^^^^^^^^^ + +QEMU has XHCI host adapter support. The XHCI hardware design is much +more virtualization-friendly when compared to EHCI and UHCI, thus XHCI +emulation uses less resources (especially CPU). So if your guest +supports XHCI (which should be the case for any operating system +released around 2010 or later) we recommend using it: + + qemu -device qemu-xhci + +XHCI supports USB 1.1, USB 2.0 and USB 3.0 devices, so this is the +only controller you need. With only a single USB controller (and +therefore only a single USB bus) present in the system there is no +need to use the bus= parameter when adding USB devices. + + +EHCI controller support +^^^^^^^^^^^^^^^^^^^^^^^ + +The QEMU EHCI Adapter supports USB 2.0 devices. It can be used either +standalone or with companion controllers (UHCI, OHCI) for USB 1.1 +devices. The companion controller setup is more convenient to use +because it provides a single USB bus supporting both USB 2.0 and USB +1.1 devices. See next section for details. + +When running EHCI in standalone mode you can add UHCI or OHCI +controllers for USB 1.1 devices too. Each controller creates its own +bus though, so there are two completely separate USB buses: One USB +1.1 bus driven by the UHCI controller and one USB 2.0 bus driven by +the EHCI controller. Devices must be attached to the correct +controller manually. + +The easiest way to add a UHCI controller to a ``pc`` machine is the +``-usb`` switch. QEMU will create the UHCI controller as function of +the PIIX3 chipset. The USB 1.1 bus will carry the name ``usb-bus.0``. + +You can use the standard ``-device`` switch to add a EHCI controller to +your virtual machine. It is strongly recommended to specify an ID for +the controller so the USB 2.0 bus gets an individual name, for example +``-device usb-ehci,id=ehci``. This will give you a USB 2.0 bus named +``ehci.0``. + +When adding USB devices using the ``-device`` switch you can specify the +bus they should be attached to. Here is a complete example: + +.. parsed-literal:: + + |qemu_system| -M pc ${otheroptions} \\ + -drive if=none,id=usbstick,format=raw,file=/path/to/image \\ + -usb \\ + -device usb-ehci,id=ehci \\ + -device usb-tablet,bus=usb-bus.0 \\ + -device usb-storage,bus=ehci.0,drive=usbstick + +This attaches a USB tablet to the UHCI adapter and a USB mass storage +device to the EHCI adapter. + + +Companion controller support +^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The UHCI and OHCI controllers can attach to a USB bus created by EHCI +as companion controllers. This is done by specifying the ``masterbus`` +and ``firstport`` properties. ``masterbus`` specifies the bus name the +controller should attach to. ``firstport`` specifies the first port the +controller should attach to, which is needed as usually one EHCI +controller with six ports has three UHCI companion controllers with +two ports each. + +There is a config file in docs which will do all this for +you, which you can use like this: + +.. parsed-literal:: + + |qemu_system| -readconfig docs/config/ich9-ehci-uhci.cfg + +Then use ``bus=ehci.0`` to assign your USB devices to that bus. + +Using the ``-usb`` switch for ``q35`` machines will create a similar +USB controller configuration. + + +.. _Connecting USB devices: + +Connecting USB devices +~~~~~~~~~~~~~~~~~~~~~~ + +USB devices can be connected with the ``-device usb-...`` command line +option or the ``device_add`` monitor command. Available devices are: + +``usb-mouse`` + Virtual Mouse. This will override the PS/2 mouse emulation when + activated. + +``usb-tablet`` + Pointer device that uses absolute coordinates (like a touchscreen). + This means QEMU is able to report the mouse position without having + to grab the mouse. Also overrides the PS/2 mouse emulation when + activated. + +``usb-storage,drive=drive_id`` + Mass storage device backed by drive_id (see the :ref:`disk images` + chapter in the System Emulation Users Guide). This is the classic + bulk-only transport protocol used by 99% of USB sticks. This + example shows it connected to an XHCI USB controller and with + a drive backed by a raw format disk image: + + .. parsed-literal:: + + |qemu_system| [...] \\ + -drive if=none,id=stick,format=raw,file=/path/to/file.img \\ + -device nec-usb-xhci,id=xhci \\ + -device usb-storage,bus=xhci.0,drive=stick + +``usb-uas`` + USB attached SCSI device. This does not create a SCSI disk, so + you need to explicitly create a ``scsi-hd`` or ``scsi-cd`` device + on the command line, as well as using the ``-drive`` option to + specify what those disks are backed by. One ``usb-uas`` device can + handle multiple logical units (disks). This example creates three + logical units: two disks and one cdrom drive: + + .. parsed-literal:: + + |qemu_system| [...] \\ + -drive if=none,id=uas-disk1,format=raw,file=/path/to/file1.img \\ + -drive if=none,id=uas-disk2,format=raw,file=/path/to/file2.img \\ + -drive if=none,id=uas-cdrom,media=cdrom,format=raw,file=/path/to/image.iso \\ + -device nec-usb-xhci,id=xhci \\ + -device usb-uas,id=uas,bus=xhci.0 \\ + -device scsi-hd,bus=uas.0,scsi-id=0,lun=0,drive=uas-disk1 \\ + -device scsi-hd,bus=uas.0,scsi-id=0,lun=1,drive=uas-disk2 \\ + -device scsi-cd,bus=uas.0,scsi-id=0,lun=5,drive=uas-cdrom + +``usb-bot`` + Bulk-only transport storage device. This presents the guest with the + same USB bulk-only transport protocol interface as ``usb-storage``, but + the QEMU command line option works like ``usb-uas`` and does not + automatically create SCSI disks for you. ``usb-bot`` supports up to + 16 LUNs. Unlike ``usb-uas``, the LUN numbers must be continuous, + i.e. for three devices you must use 0+1+2. The 0+1+5 numbering from the + ``usb-uas`` example above won't work with ``usb-bot``. + +``usb-mtp,rootdir=dir`` + Media transfer protocol device, using dir as root of the file tree + that is presented to the guest. + +``usb-host,hostbus=bus,hostaddr=addr`` + Pass through the host device identified by bus and addr + +``usb-host,vendorid=vendor,productid=product`` + Pass through the host device identified by vendor and product ID + +``usb-wacom-tablet`` + Virtual Wacom PenPartner tablet. This device is similar to the + ``tablet`` above but it can be used with the tslib library because in + addition to touch coordinates it reports touch pressure. + +``usb-kbd`` + Standard USB keyboard. Will override the PS/2 keyboard (if present). + +``usb-serial,chardev=id`` + Serial converter. This emulates an FTDI FT232BM chip connected to + host character device id. + +``usb-braille,chardev=id`` + Braille device. This will use BrlAPI to display the braille output on + a real or fake device referenced by id. + +``usb-net[,netdev=id]`` + Network adapter that supports CDC ethernet and RNDIS protocols. id + specifies a netdev defined with ``-netdev …,id=id``. For instance, + user-mode networking can be used with + + .. parsed-literal:: + + |qemu_system| [...] -netdev user,id=net0 -device usb-net,netdev=net0 + +``usb-ccid`` + Smartcard reader device + +``usb-audio`` + USB audio device + +``u2f-{emulated,passthru}`` + Universal Second Factor device + +Physical port addressing +^^^^^^^^^^^^^^^^^^^^^^^^ + +For all the above USB devices, by default QEMU will plug the device +into the next available port on the specified USB bus, or onto +some available USB bus if you didn't specify one explicitly. +If you need to, you can also specify the physical port where +the device will show up in the guest. This can be done using the +``port`` property. UHCI has two root ports (1,2). EHCI has six root +ports (1-6), and the emulated (1.1) USB hub has eight ports. + +Plugging a tablet into UHCI port 1 works like this:: + + -device usb-tablet,bus=usb-bus.0,port=1 + +Plugging a hub into UHCI port 2 works like this:: + + -device usb-hub,bus=usb-bus.0,port=2 + +Plugging a virtual USB stick into port 4 of the hub just plugged works +this way:: + + -device usb-storage,bus=usb-bus.0,port=2.4,drive=... + +In the monitor, the ``device_add` command also accepts a ``port`` +property specification. If you want to unplug devices too you should +specify some unique id which you can use to refer to the device. +You can then use ``device_del`` to unplug the device later. +For example:: + + (qemu) device_add usb-tablet,bus=usb-bus.0,port=1,id=my-tablet + (qemu) device_del my-tablet + +Hotplugging USB storage +~~~~~~~~~~~~~~~~~~~~~~~ + +The ``usb-bot`` and ``usb-uas`` devices can be hotplugged. In the hotplug +case they are added with ``attached = false`` so the guest will not see +the device until the ``attached`` property is explicitly set to true. +That allows you to attach one or more scsi devices before making the +device visible to the guest. The workflow looks like this: + +#. ``device-add usb-bot,id=foo`` +#. ``device-add scsi-{hd,cd},bus=foo.0,lun=0`` +#. optionally add more devices (luns 1 ... 15) +#. ``scripts/qmp/qom-set foo.attached = true`` + +.. _host_005fusb_005fdevices: + +Using host USB devices on a Linux host +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +WARNING: this is an experimental feature. QEMU will slow down when using +it. USB devices requiring real time streaming (i.e. USB Video Cameras) +are not supported yet. + +1. If you use an early Linux 2.4 kernel, verify that no Linux driver is + actually using the USB device. A simple way to do that is simply to + disable the corresponding kernel module by renaming it from + ``mydriver.o`` to ``mydriver.o.disabled``. + +2. Verify that ``/proc/bus/usb`` is working (most Linux distributions + should enable it by default). You should see something like that: + + :: + + ls /proc/bus/usb + 001 devices drivers + +3. Since only root can access to the USB devices directly, you can + either launch QEMU as root or change the permissions of the USB + devices you want to use. For testing, the following suffices: + + :: + + chown -R myuid /proc/bus/usb + +4. Launch QEMU and do in the monitor: + + :: + + info usbhost + Device 1.2, speed 480 Mb/s + Class 00: USB device 1234:5678, USB DISK + + You should see the list of the devices you can use (Never try to use + hubs, it won't work). + +5. Add the device in QEMU by using: + + :: + + device_add usb-host,vendorid=0x1234,productid=0x5678 + + Normally the guest OS should report that a new USB device is plugged. + You can use the option ``-device usb-host,...`` to do the same. + +6. Now you can try to use the host USB device in QEMU. + +When relaunching QEMU, you may have to unplug and plug again the USB +device to make it work again (this is a bug). + +``usb-host`` properties for specifying the host device +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The example above uses the ``vendorid`` and ``productid`` to +specify which host device to pass through, but this is not +the only way to specify the host device. ``usb-host`` supports +the following properties: + +``hostbus=<nr>`` + Specifies the bus number the device must be attached to +``hostaddr=<nr>`` + Specifies the device address the device got assigned by the guest os +``hostport=<str>`` + Specifies the physical port the device is attached to +``vendorid=<hexnr>`` + Specifies the vendor ID of the device +``productid=<hexnr>`` + Specifies the product ID of the device. + +In theory you can combine all these properties as you like. In +practice only a few combinations are useful: + +- ``vendorid`` and ``productid`` -- match for a specific device, pass it to + the guest when it shows up somewhere in the host. + +- ``hostbus`` and ``hostport`` -- match for a specific physical port in the + host, any device which is plugged in there gets passed to the + guest. + +- ``hostbus`` and ``hostaddr`` -- most useful for ad-hoc pass through as the + hostaddr isn't stable. The next time you plug the device into the host it + will get a new hostaddr. + +Note that on the host USB 1.1 devices are handled by UHCI/OHCI and USB +2.0 by EHCI. That means different USB devices plugged into the very +same physical port on the host may show up on different host buses +depending on the speed. Supposing that devices plugged into a given +physical port appear as bus 1 + port 1 for 2.0 devices and bus 3 + port 1 +for 1.1 devices, you can pass through any device plugged into that port +and also assign it to the correct USB bus in QEMU like this: + +.. parsed-literal:: + + |qemu_system| -M pc [...] \\ + -usb \\ + -device usb-ehci,id=ehci \\ + -device usb-host,bus=usb-bus.0,hostbus=3,hostport=1 \\ + -device usb-host,bus=ehci.0,hostbus=1,hostport=1 diff --git a/docs/system/devices/vhost-user-rng.rst b/docs/system/devices/vhost-user-rng.rst new file mode 100644 index 000000000..a145d4105 --- /dev/null +++ b/docs/system/devices/vhost-user-rng.rst @@ -0,0 +1,39 @@ +QEMU vhost-user-rng - RNG emulation +=================================== + +Background +---------- + +What follows builds on the material presented in vhost-user.rst - it should +be reviewed before moving forward with the content in this file. + +Description +----------- + +The vhost-user-rng device implementation was designed to work with a random +number generator daemon such as the one found in the vhost-device crate of +the rust-vmm project available on github [1]. + +[1]. https://github.com/rust-vmm/vhost-device + +Examples +-------- + +The daemon should be started first: + +:: + + host# vhost-device-rng --socket-path=rng.sock -c 1 -m 512 -p 1000 + +The QEMU invocation needs to create a chardev socket the device can +use to communicate as well as share the guests memory over a memfd. + +:: + + host# qemu-system \ + -chardev socket,path=$(PATH)/rng.sock,id=rng0 \ + -device vhost-user-rng-pci,chardev=rng0 \ + -m 4096 \ + -object memory-backend-file,id=mem,size=4G,mem-path=/dev/shm,share=on \ + -numa node,memdev=mem \ + ... diff --git a/docs/system/devices/vhost-user.rst b/docs/system/devices/vhost-user.rst new file mode 100644 index 000000000..86128114f --- /dev/null +++ b/docs/system/devices/vhost-user.rst @@ -0,0 +1,59 @@ +.. _vhost_user: + +vhost-user back ends +-------------------- + +vhost-user back ends are way to service the request of VirtIO devices +outside of QEMU itself. To do this there are a number of things +required. + +vhost-user device +=================== + +These are simple stub devices that ensure the VirtIO device is visible +to the guest. The code is mostly boilerplate although each device has +a ``chardev`` option which specifies the ID of the ``--chardev`` +device that connects via a socket to the vhost-user *daemon*. + +vhost-user daemon +================= + +This is a separate process that is connected to by QEMU via a socket +following the :ref:`vhost_user_proto`. There are a number of daemons +that can be built when enabled by the project although any daemon that +meets the specification for a given device can be used. + +Shared memory object +==================== + +In order for the daemon to access the VirtIO queues to process the +requests it needs access to the guest's address space. This is +achieved via the ``memory-backend-file`` or ``memory-backend-memfd`` +objects. A reference to a file-descriptor which can access this object +will be passed via the socket as part of the protocol negotiation. + +Currently the shared memory object needs to match the size of the main +system memory as defined by the ``-m`` argument. + +Example +======= + +First start you daemon. + +.. parsed-literal:: + + $ virtio-foo --socket-path=/var/run/foo.sock $OTHER_ARGS + +The you start your QEMU instance specifying the device, chardev and +memory objects. + +.. parsed-literal:: + + $ |qemu_system| \\ + -m 4096 \\ + -chardev socket,id=ba1,path=/var/run/foo.sock \\ + -device vhost-user-foo,chardev=ba1,$OTHER_ARGS \\ + -object memory-backend-memfd,id=mem,size=4G,share=on \\ + -numa node,memdev=mem \\ + ... + diff --git a/docs/system/devices/virtio-pmem.rst b/docs/system/devices/virtio-pmem.rst new file mode 100644 index 000000000..c82ac0673 --- /dev/null +++ b/docs/system/devices/virtio-pmem.rst @@ -0,0 +1,76 @@ + +=========== +virtio pmem +=========== + +This document explains the setup and usage of the virtio pmem device. +The virtio pmem device is a paravirtualized persistent memory device +on regular (i.e non-NVDIMM) storage. + +Usecase +------- + +Virtio pmem allows to bypass the guest page cache and directly use +host page cache. This reduces guest memory footprint as the host can +make efficient memory reclaim decisions under memory pressure. + +How does virtio-pmem compare to the nvdimm emulation? +----------------------------------------------------- + +NVDIMM emulation on regular (i.e. non-NVDIMM) host storage does not +persist the guest writes as there are no defined semantics in the device +specification. The virtio pmem device provides guest write persistence +on non-NVDIMM host storage. + +virtio pmem usage +----------------- + +A virtio pmem device backed by a memory-backend-file can be created on +the QEMU command line as in the following example:: + + -object memory-backend-file,id=mem1,share,mem-path=./virtio_pmem.img,size=4G + -device virtio-pmem-pci,memdev=mem1,id=nv1 + +where: + + - "object memory-backend-file,id=mem1,share,mem-path=<image>, size=<image size>" + creates a backend file with the specified size. + + - "device virtio-pmem-pci,id=nvdimm1,memdev=mem1" creates a virtio pmem + pci device whose storage is provided by above memory backend device. + +Multiple virtio pmem devices can be created if multiple pairs of "-object" +and "-device" are provided. + +Hotplug +------- + +Virtio pmem devices can be hotplugged via the QEMU monitor. First, the +memory backing has to be added via 'object_add'; afterwards, the virtio +pmem device can be added via 'device_add'. + +For example, the following commands add another 4GB virtio pmem device to +the guest:: + + (qemu) object_add memory-backend-file,id=mem2,share=on,mem-path=virtio_pmem2.img,size=4G + (qemu) device_add virtio-pmem-pci,id=virtio_pmem2,memdev=mem2 + +Guest Data Persistence +---------------------- + +Guest data persistence on non-NVDIMM requires guest userspace applications +to perform fsync/msync. This is different from a real nvdimm backend where +no additional fsync/msync is required. This is to persist guest writes in +host backing file which otherwise remains in host page cache and there is +risk of losing the data in case of power failure. + +With virtio pmem device, MAP_SYNC mmap flag is not supported. This provides +a hint to application to perform fsync for write persistence. + +Limitations +----------- + +- Real nvdimm device backend is not supported. +- virtio pmem hotunplug is not supported. +- ACPI NVDIMM features like regions/namespaces are not supported. +- ndctl command is not supported. |