diff options
Diffstat (limited to 'hw/arm/msf2-soc.c')
| -rw-r--r-- | hw/arm/msf2-soc.c | 266 |
1 files changed, 266 insertions, 0 deletions
diff --git a/hw/arm/msf2-soc.c b/hw/arm/msf2-soc.c new file mode 100644 index 000000000..b5fe9f364 --- /dev/null +++ b/hw/arm/msf2-soc.c @@ -0,0 +1,266 @@ +/* + * SmartFusion2 SoC emulation. + * + * Copyright (c) 2017-2020 Subbaraya Sundeep <sundeep.lkml@gmail.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "qapi/error.h" +#include "exec/address-spaces.h" +#include "hw/char/serial.h" +#include "hw/arm/msf2-soc.h" +#include "hw/misc/unimp.h" +#include "hw/qdev-clock.h" +#include "sysemu/sysemu.h" + +#define MSF2_TIMER_BASE 0x40004000 +#define MSF2_SYSREG_BASE 0x40038000 +#define MSF2_EMAC_BASE 0x40041000 + +#define ENVM_BASE_ADDRESS 0x60000000 + +#define SRAM_BASE_ADDRESS 0x20000000 + +#define MSF2_EMAC_IRQ 12 + +#define MSF2_ENVM_MAX_SIZE (512 * KiB) + +/* + * eSRAM max size is 80k without SECDED(Single error correction and + * dual error detection) feature and 64k with SECDED. + * We do not support SECDED now. + */ +#define MSF2_ESRAM_MAX_SIZE (80 * KiB) + +static const uint32_t spi_addr[MSF2_NUM_SPIS] = { 0x40001000 , 0x40011000 }; +static const uint32_t uart_addr[MSF2_NUM_UARTS] = { 0x40000000 , 0x40010000 }; + +static const int spi_irq[MSF2_NUM_SPIS] = { 2, 3 }; +static const int uart_irq[MSF2_NUM_UARTS] = { 10, 11 }; +static const int timer_irq[MSF2_NUM_TIMERS] = { 14, 15 }; + +static void m2sxxx_soc_initfn(Object *obj) +{ + MSF2State *s = MSF2_SOC(obj); + int i; + + object_initialize_child(obj, "armv7m", &s->armv7m, TYPE_ARMV7M); + + object_initialize_child(obj, "sysreg", &s->sysreg, TYPE_MSF2_SYSREG); + + object_initialize_child(obj, "timer", &s->timer, TYPE_MSS_TIMER); + + for (i = 0; i < MSF2_NUM_SPIS; i++) { + object_initialize_child(obj, "spi[*]", &s->spi[i], TYPE_MSS_SPI); + } + + object_initialize_child(obj, "emac", &s->emac, TYPE_MSS_EMAC); + + s->m3clk = qdev_init_clock_in(DEVICE(obj), "m3clk", NULL, NULL, 0); + s->refclk = qdev_init_clock_in(DEVICE(obj), "refclk", NULL, NULL, 0); +} + +static void m2sxxx_soc_realize(DeviceState *dev_soc, Error **errp) +{ + MSF2State *s = MSF2_SOC(dev_soc); + DeviceState *dev, *armv7m; + SysBusDevice *busdev; + int i; + + MemoryRegion *system_memory = get_system_memory(); + + if (!clock_has_source(s->m3clk)) { + error_setg(errp, "m3clk must be wired up by the board code"); + return; + } + + /* + * We use s->refclk internally and only define it with qdev_init_clock_in() + * so it is correctly parented and not leaked on an init/deinit; it is not + * intended as an externally exposed clock. + */ + if (clock_has_source(s->refclk)) { + error_setg(errp, "refclk must not be wired up by the board code"); + return; + } + + /* + * TODO: ideally we should model the SoC SYSTICK_CR register at 0xe0042038, + * which allows the guest to program the divisor between the m3clk and + * the systick refclk to either /4, /8, /16 or /32, as well as setting + * the value the guest can read in the STCALIB register. Currently we + * implement the divisor as a fixed /32, which matches the reset value + * of SYSTICK_CR. + */ + clock_set_mul_div(s->refclk, 32, 1); + clock_set_source(s->refclk, s->m3clk); + + memory_region_init_rom(&s->nvm, OBJECT(dev_soc), "MSF2.eNVM", s->envm_size, + &error_fatal); + /* + * On power-on, the eNVM region 0x60000000 is automatically + * remapped to the Cortex-M3 processor executable region + * start address (0x0). We do not support remapping other eNVM, + * eSRAM and DDR regions by guest(via Sysreg) currently. + */ + memory_region_init_alias(&s->nvm_alias, OBJECT(dev_soc), "MSF2.eNVM", + &s->nvm, 0, s->envm_size); + + memory_region_add_subregion(system_memory, ENVM_BASE_ADDRESS, &s->nvm); + memory_region_add_subregion(system_memory, 0, &s->nvm_alias); + + memory_region_init_ram(&s->sram, NULL, "MSF2.eSRAM", s->esram_size, + &error_fatal); + memory_region_add_subregion(system_memory, SRAM_BASE_ADDRESS, &s->sram); + + armv7m = DEVICE(&s->armv7m); + qdev_prop_set_uint32(armv7m, "num-irq", 81); + qdev_prop_set_string(armv7m, "cpu-type", s->cpu_type); + qdev_prop_set_bit(armv7m, "enable-bitband", true); + qdev_connect_clock_in(armv7m, "cpuclk", s->m3clk); + qdev_connect_clock_in(armv7m, "refclk", s->refclk); + object_property_set_link(OBJECT(&s->armv7m), "memory", + OBJECT(get_system_memory()), &error_abort); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->armv7m), errp)) { + return; + } + + for (i = 0; i < MSF2_NUM_UARTS; i++) { + if (serial_hd(i)) { + serial_mm_init(get_system_memory(), uart_addr[i], 2, + qdev_get_gpio_in(armv7m, uart_irq[i]), + 115200, serial_hd(i), DEVICE_NATIVE_ENDIAN); + } + } + + dev = DEVICE(&s->timer); + /* + * APB0 clock is the timer input clock. + * TODO: ideally the MSF2 timer device should use a Clock rather than a + * clock-frequency integer property. + */ + qdev_prop_set_uint32(dev, "clock-frequency", + clock_get_hz(s->m3clk) / s->apb0div); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer), errp)) { + return; + } + busdev = SYS_BUS_DEVICE(dev); + sysbus_mmio_map(busdev, 0, MSF2_TIMER_BASE); + sysbus_connect_irq(busdev, 0, + qdev_get_gpio_in(armv7m, timer_irq[0])); + sysbus_connect_irq(busdev, 1, + qdev_get_gpio_in(armv7m, timer_irq[1])); + + dev = DEVICE(&s->sysreg); + qdev_prop_set_uint32(dev, "apb0divisor", s->apb0div); + qdev_prop_set_uint32(dev, "apb1divisor", s->apb1div); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->sysreg), errp)) { + return; + } + busdev = SYS_BUS_DEVICE(dev); + sysbus_mmio_map(busdev, 0, MSF2_SYSREG_BASE); + + for (i = 0; i < MSF2_NUM_SPIS; i++) { + gchar *bus_name; + + if (!sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), errp)) { + return; + } + + sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, spi_addr[i]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0, + qdev_get_gpio_in(armv7m, spi_irq[i])); + + /* Alias controller SPI bus to the SoC itself */ + bus_name = g_strdup_printf("spi%d", i); + object_property_add_alias(OBJECT(s), bus_name, + OBJECT(&s->spi[i]), "spi"); + g_free(bus_name); + } + + /* FIXME use qdev NIC properties instead of nd_table[] */ + if (nd_table[0].used) { + qemu_check_nic_model(&nd_table[0], TYPE_MSS_EMAC); + qdev_set_nic_properties(DEVICE(&s->emac), &nd_table[0]); + } + dev = DEVICE(&s->emac); + object_property_set_link(OBJECT(&s->emac), "ahb-bus", + OBJECT(get_system_memory()), &error_abort); + if (!sysbus_realize(SYS_BUS_DEVICE(&s->emac), errp)) { + return; + } + busdev = SYS_BUS_DEVICE(dev); + sysbus_mmio_map(busdev, 0, MSF2_EMAC_BASE); + sysbus_connect_irq(busdev, 0, + qdev_get_gpio_in(armv7m, MSF2_EMAC_IRQ)); + + /* Below devices are not modelled yet. */ + create_unimplemented_device("i2c_0", 0x40002000, 0x1000); + create_unimplemented_device("dma", 0x40003000, 0x1000); + create_unimplemented_device("watchdog", 0x40005000, 0x1000); + create_unimplemented_device("i2c_1", 0x40012000, 0x1000); + create_unimplemented_device("gpio", 0x40013000, 0x1000); + create_unimplemented_device("hs-dma", 0x40014000, 0x1000); + create_unimplemented_device("can", 0x40015000, 0x1000); + create_unimplemented_device("rtc", 0x40017000, 0x1000); + create_unimplemented_device("apb_config", 0x40020000, 0x10000); + create_unimplemented_device("usb", 0x40043000, 0x1000); +} + +static Property m2sxxx_soc_properties[] = { + /* + * part name specifies the type of SmartFusion2 device variant(this + * property is for information purpose only. + */ + DEFINE_PROP_STRING("cpu-type", MSF2State, cpu_type), + DEFINE_PROP_STRING("part-name", MSF2State, part_name), + DEFINE_PROP_UINT64("eNVM-size", MSF2State, envm_size, MSF2_ENVM_MAX_SIZE), + DEFINE_PROP_UINT64("eSRAM-size", MSF2State, esram_size, + MSF2_ESRAM_MAX_SIZE), + /* default divisors in Libero GUI */ + DEFINE_PROP_UINT8("apb0div", MSF2State, apb0div, 2), + DEFINE_PROP_UINT8("apb1div", MSF2State, apb1div, 2), + DEFINE_PROP_END_OF_LIST(), +}; + +static void m2sxxx_soc_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = m2sxxx_soc_realize; + device_class_set_props(dc, m2sxxx_soc_properties); +} + +static const TypeInfo m2sxxx_soc_info = { + .name = TYPE_MSF2_SOC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(MSF2State), + .instance_init = m2sxxx_soc_initfn, + .class_init = m2sxxx_soc_class_init, +}; + +static void m2sxxx_soc_types(void) +{ + type_register_static(&m2sxxx_soc_info); +} + +type_init(m2sxxx_soc_types) |