aboutsummaryrefslogtreecommitdiffstats
path: root/hw/arm/nseries.c
diff options
context:
space:
mode:
Diffstat (limited to 'hw/arm/nseries.c')
-rw-r--r--hw/arm/nseries.c1468
1 files changed, 1468 insertions, 0 deletions
diff --git a/hw/arm/nseries.c b/hw/arm/nseries.c
new file mode 100644
index 000000000..af3164c55
--- /dev/null
+++ b/hw/arm/nseries.c
@@ -0,0 +1,1468 @@
+/*
+ * Nokia N-series internet tablets.
+ *
+ * Copyright (C) 2007 Nokia Corporation
+ * Written by Andrzej Zaborowski <andrew@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 or
+ * (at your option) version 3 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "cpu.h"
+#include "chardev/char.h"
+#include "qemu/cutils.h"
+#include "qemu/bswap.h"
+#include "sysemu/reset.h"
+#include "sysemu/runstate.h"
+#include "sysemu/sysemu.h"
+#include "hw/arm/omap.h"
+#include "hw/arm/boot.h"
+#include "hw/irq.h"
+#include "ui/console.h"
+#include "hw/boards.h"
+#include "hw/i2c/i2c.h"
+#include "hw/display/blizzard.h"
+#include "hw/input/lm832x.h"
+#include "hw/input/tsc2xxx.h"
+#include "hw/misc/cbus.h"
+#include "hw/sensor/tmp105.h"
+#include "hw/qdev-properties.h"
+#include "hw/block/flash.h"
+#include "hw/hw.h"
+#include "hw/loader.h"
+#include "hw/sysbus.h"
+#include "qemu/log.h"
+
+/* Nokia N8x0 support */
+struct n800_s {
+ struct omap_mpu_state_s *mpu;
+
+ struct rfbi_chip_s blizzard;
+ struct {
+ void *opaque;
+ uint32_t (*txrx)(void *opaque, uint32_t value, int len);
+ uWireSlave *chip;
+ } ts;
+
+ int keymap[0x80];
+ DeviceState *kbd;
+
+ DeviceState *usb;
+ void *retu;
+ void *tahvo;
+ DeviceState *nand;
+};
+
+/* GPIO pins */
+#define N8X0_TUSB_ENABLE_GPIO 0
+#define N800_MMC2_WP_GPIO 8
+#define N800_UNKNOWN_GPIO0 9 /* out */
+#define N810_MMC2_VIOSD_GPIO 9
+#define N810_HEADSET_AMP_GPIO 10
+#define N800_CAM_TURN_GPIO 12
+#define N810_GPS_RESET_GPIO 12
+#define N800_BLIZZARD_POWERDOWN_GPIO 15
+#define N800_MMC1_WP_GPIO 23
+#define N810_MMC2_VSD_GPIO 23
+#define N8X0_ONENAND_GPIO 26
+#define N810_BLIZZARD_RESET_GPIO 30
+#define N800_UNKNOWN_GPIO2 53 /* out */
+#define N8X0_TUSB_INT_GPIO 58
+#define N8X0_BT_WKUP_GPIO 61
+#define N8X0_STI_GPIO 62
+#define N8X0_CBUS_SEL_GPIO 64
+#define N8X0_CBUS_DAT_GPIO 65
+#define N8X0_CBUS_CLK_GPIO 66
+#define N8X0_WLAN_IRQ_GPIO 87
+#define N8X0_BT_RESET_GPIO 92
+#define N8X0_TEA5761_CS_GPIO 93
+#define N800_UNKNOWN_GPIO 94
+#define N810_TSC_RESET_GPIO 94
+#define N800_CAM_ACT_GPIO 95
+#define N810_GPS_WAKEUP_GPIO 95
+#define N8X0_MMC_CS_GPIO 96
+#define N8X0_WLAN_PWR_GPIO 97
+#define N8X0_BT_HOST_WKUP_GPIO 98
+#define N810_SPEAKER_AMP_GPIO 101
+#define N810_KB_LOCK_GPIO 102
+#define N800_TSC_TS_GPIO 103
+#define N810_TSC_TS_GPIO 106
+#define N8X0_HEADPHONE_GPIO 107
+#define N8X0_RETU_GPIO 108
+#define N800_TSC_KP_IRQ_GPIO 109
+#define N810_KEYBOARD_GPIO 109
+#define N800_BAT_COVER_GPIO 110
+#define N810_SLIDE_GPIO 110
+#define N8X0_TAHVO_GPIO 111
+#define N800_UNKNOWN_GPIO4 112 /* out */
+#define N810_SLEEPX_LED_GPIO 112
+#define N800_TSC_RESET_GPIO 118 /* ? */
+#define N810_AIC33_RESET_GPIO 118
+#define N800_TSC_UNKNOWN_GPIO 119 /* out */
+#define N8X0_TMP105_GPIO 125
+
+/* Config */
+#define BT_UART 0
+#define XLDR_LL_UART 1
+
+/* Addresses on the I2C bus 0 */
+#define N810_TLV320AIC33_ADDR 0x18 /* Audio CODEC */
+#define N8X0_TCM825x_ADDR 0x29 /* Camera */
+#define N810_LP5521_ADDR 0x32 /* LEDs */
+#define N810_TSL2563_ADDR 0x3d /* Light sensor */
+#define N810_LM8323_ADDR 0x45 /* Keyboard */
+/* Addresses on the I2C bus 1 */
+#define N8X0_TMP105_ADDR 0x48 /* Temperature sensor */
+#define N8X0_MENELAUS_ADDR 0x72 /* Power management */
+
+/* Chipselects on GPMC NOR interface */
+#define N8X0_ONENAND_CS 0
+#define N8X0_USB_ASYNC_CS 1
+#define N8X0_USB_SYNC_CS 4
+
+#define N8X0_BD_ADDR 0x00, 0x1a, 0x89, 0x9e, 0x3e, 0x81
+
+static void n800_mmc_cs_cb(void *opaque, int line, int level)
+{
+ /* TODO: this seems to actually be connected to the menelaus, to
+ * which also both MMC slots connect. */
+ omap_mmc_enable((struct omap_mmc_s *) opaque, !level);
+}
+
+static void n8x0_gpio_setup(struct n800_s *s)
+{
+ qdev_connect_gpio_out(s->mpu->gpio, N8X0_MMC_CS_GPIO,
+ qemu_allocate_irq(n800_mmc_cs_cb, s->mpu->mmc, 0));
+ qemu_irq_lower(qdev_get_gpio_in(s->mpu->gpio, N800_BAT_COVER_GPIO));
+}
+
+#define MAEMO_CAL_HEADER(...) \
+ 'C', 'o', 'n', 'F', 0x02, 0x00, 0x04, 0x00, \
+ __VA_ARGS__, \
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+
+static const uint8_t n8x0_cal_wlan_mac[] = {
+ MAEMO_CAL_HEADER('w', 'l', 'a', 'n', '-', 'm', 'a', 'c')
+ 0x1c, 0x00, 0x00, 0x00, 0x47, 0xd6, 0x69, 0xb3,
+ 0x30, 0x08, 0xa0, 0x83, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x1a, 0x00, 0x00, 0x00,
+ 0x89, 0x00, 0x00, 0x00, 0x9e, 0x00, 0x00, 0x00,
+ 0x5d, 0x00, 0x00, 0x00, 0xc1, 0x00, 0x00, 0x00,
+};
+
+static const uint8_t n8x0_cal_bt_id[] = {
+ MAEMO_CAL_HEADER('b', 't', '-', 'i', 'd', 0, 0, 0)
+ 0x0a, 0x00, 0x00, 0x00, 0xa3, 0x4b, 0xf6, 0x96,
+ 0xa8, 0xeb, 0xb2, 0x41, 0x00, 0x00, 0x00, 0x00,
+ N8X0_BD_ADDR,
+};
+
+static void n8x0_nand_setup(struct n800_s *s)
+{
+ char *otp_region;
+ DriveInfo *dinfo;
+
+ s->nand = qdev_new("onenand");
+ qdev_prop_set_uint16(s->nand, "manufacturer_id", NAND_MFR_SAMSUNG);
+ /* Either 0x40 or 0x48 are OK for the device ID */
+ qdev_prop_set_uint16(s->nand, "device_id", 0x48);
+ qdev_prop_set_uint16(s->nand, "version_id", 0);
+ qdev_prop_set_int32(s->nand, "shift", 1);
+ dinfo = drive_get(IF_MTD, 0, 0);
+ if (dinfo) {
+ qdev_prop_set_drive_err(s->nand, "drive", blk_by_legacy_dinfo(dinfo),
+ &error_fatal);
+ }
+ sysbus_realize_and_unref(SYS_BUS_DEVICE(s->nand), &error_fatal);
+ sysbus_connect_irq(SYS_BUS_DEVICE(s->nand), 0,
+ qdev_get_gpio_in(s->mpu->gpio, N8X0_ONENAND_GPIO));
+ omap_gpmc_attach(s->mpu->gpmc, N8X0_ONENAND_CS,
+ sysbus_mmio_get_region(SYS_BUS_DEVICE(s->nand), 0));
+ otp_region = onenand_raw_otp(s->nand);
+
+ memcpy(otp_region + 0x000, n8x0_cal_wlan_mac, sizeof(n8x0_cal_wlan_mac));
+ memcpy(otp_region + 0x800, n8x0_cal_bt_id, sizeof(n8x0_cal_bt_id));
+ /* XXX: in theory should also update the OOB for both pages */
+}
+
+static qemu_irq n8x0_system_powerdown;
+
+static void n8x0_powerdown_req(Notifier *n, void *opaque)
+{
+ qemu_irq_raise(n8x0_system_powerdown);
+}
+
+static Notifier n8x0_system_powerdown_notifier = {
+ .notify = n8x0_powerdown_req
+};
+
+static void n8x0_i2c_setup(struct n800_s *s)
+{
+ DeviceState *dev;
+ qemu_irq tmp_irq = qdev_get_gpio_in(s->mpu->gpio, N8X0_TMP105_GPIO);
+ I2CBus *i2c = omap_i2c_bus(s->mpu->i2c[0]);
+
+ /* Attach a menelaus PM chip */
+ dev = DEVICE(i2c_slave_create_simple(i2c, "twl92230", N8X0_MENELAUS_ADDR));
+ qdev_connect_gpio_out(dev, 3,
+ qdev_get_gpio_in(s->mpu->ih[0],
+ OMAP_INT_24XX_SYS_NIRQ));
+
+ n8x0_system_powerdown = qdev_get_gpio_in(dev, 3);
+ qemu_register_powerdown_notifier(&n8x0_system_powerdown_notifier);
+
+ /* Attach a TMP105 PM chip (A0 wired to ground) */
+ dev = DEVICE(i2c_slave_create_simple(i2c, TYPE_TMP105, N8X0_TMP105_ADDR));
+ qdev_connect_gpio_out(dev, 0, tmp_irq);
+}
+
+/* Touchscreen and keypad controller */
+static MouseTransformInfo n800_pointercal = {
+ .x = 800,
+ .y = 480,
+ .a = { 14560, -68, -3455208, -39, -9621, 35152972, 65536 },
+};
+
+static MouseTransformInfo n810_pointercal = {
+ .x = 800,
+ .y = 480,
+ .a = { 15041, 148, -4731056, 171, -10238, 35933380, 65536 },
+};
+
+#define RETU_KEYCODE 61 /* F3 */
+
+static void n800_key_event(void *opaque, int keycode)
+{
+ struct n800_s *s = (struct n800_s *) opaque;
+ int code = s->keymap[keycode & 0x7f];
+
+ if (code == -1) {
+ if ((keycode & 0x7f) == RETU_KEYCODE) {
+ retu_key_event(s->retu, !(keycode & 0x80));
+ }
+ return;
+ }
+
+ tsc210x_key_event(s->ts.chip, code, !(keycode & 0x80));
+}
+
+static const int n800_keys[16] = {
+ -1,
+ 72, /* Up */
+ 63, /* Home (F5) */
+ -1,
+ 75, /* Left */
+ 28, /* Enter */
+ 77, /* Right */
+ -1,
+ 1, /* Cycle (ESC) */
+ 80, /* Down */
+ 62, /* Menu (F4) */
+ -1,
+ 66, /* Zoom- (F8) */
+ 64, /* FullScreen (F6) */
+ 65, /* Zoom+ (F7) */
+ -1,
+};
+
+static void n800_tsc_kbd_setup(struct n800_s *s)
+{
+ int i;
+
+ /* XXX: are the three pins inverted inside the chip between the
+ * tsc and the cpu (N4111)? */
+ qemu_irq penirq = NULL; /* NC */
+ qemu_irq kbirq = qdev_get_gpio_in(s->mpu->gpio, N800_TSC_KP_IRQ_GPIO);
+ qemu_irq dav = qdev_get_gpio_in(s->mpu->gpio, N800_TSC_TS_GPIO);
+
+ s->ts.chip = tsc2301_init(penirq, kbirq, dav);
+ s->ts.opaque = s->ts.chip->opaque;
+ s->ts.txrx = tsc210x_txrx;
+
+ for (i = 0; i < 0x80; i++) {
+ s->keymap[i] = -1;
+ }
+ for (i = 0; i < 0x10; i++) {
+ if (n800_keys[i] >= 0) {
+ s->keymap[n800_keys[i]] = i;
+ }
+ }
+
+ qemu_add_kbd_event_handler(n800_key_event, s);
+
+ tsc210x_set_transform(s->ts.chip, &n800_pointercal);
+}
+
+static void n810_tsc_setup(struct n800_s *s)
+{
+ qemu_irq pintdav = qdev_get_gpio_in(s->mpu->gpio, N810_TSC_TS_GPIO);
+
+ s->ts.opaque = tsc2005_init(pintdav);
+ s->ts.txrx = tsc2005_txrx;
+
+ tsc2005_set_transform(s->ts.opaque, &n810_pointercal);
+}
+
+/* N810 Keyboard controller */
+static void n810_key_event(void *opaque, int keycode)
+{
+ struct n800_s *s = (struct n800_s *) opaque;
+ int code = s->keymap[keycode & 0x7f];
+
+ if (code == -1) {
+ if ((keycode & 0x7f) == RETU_KEYCODE) {
+ retu_key_event(s->retu, !(keycode & 0x80));
+ }
+ return;
+ }
+
+ lm832x_key_event(s->kbd, code, !(keycode & 0x80));
+}
+
+#define M 0
+
+static int n810_keys[0x80] = {
+ [0x01] = 16, /* Q */
+ [0x02] = 37, /* K */
+ [0x03] = 24, /* O */
+ [0x04] = 25, /* P */
+ [0x05] = 14, /* Backspace */
+ [0x06] = 30, /* A */
+ [0x07] = 31, /* S */
+ [0x08] = 32, /* D */
+ [0x09] = 33, /* F */
+ [0x0a] = 34, /* G */
+ [0x0b] = 35, /* H */
+ [0x0c] = 36, /* J */
+
+ [0x11] = 17, /* W */
+ [0x12] = 62, /* Menu (F4) */
+ [0x13] = 38, /* L */
+ [0x14] = 40, /* ' (Apostrophe) */
+ [0x16] = 44, /* Z */
+ [0x17] = 45, /* X */
+ [0x18] = 46, /* C */
+ [0x19] = 47, /* V */
+ [0x1a] = 48, /* B */
+ [0x1b] = 49, /* N */
+ [0x1c] = 42, /* Shift (Left shift) */
+ [0x1f] = 65, /* Zoom+ (F7) */
+
+ [0x21] = 18, /* E */
+ [0x22] = 39, /* ; (Semicolon) */
+ [0x23] = 12, /* - (Minus) */
+ [0x24] = 13, /* = (Equal) */
+ [0x2b] = 56, /* Fn (Left Alt) */
+ [0x2c] = 50, /* M */
+ [0x2f] = 66, /* Zoom- (F8) */
+
+ [0x31] = 19, /* R */
+ [0x32] = 29 | M, /* Right Ctrl */
+ [0x34] = 57, /* Space */
+ [0x35] = 51, /* , (Comma) */
+ [0x37] = 72 | M, /* Up */
+ [0x3c] = 82 | M, /* Compose (Insert) */
+ [0x3f] = 64, /* FullScreen (F6) */
+
+ [0x41] = 20, /* T */
+ [0x44] = 52, /* . (Dot) */
+ [0x46] = 77 | M, /* Right */
+ [0x4f] = 63, /* Home (F5) */
+ [0x51] = 21, /* Y */
+ [0x53] = 80 | M, /* Down */
+ [0x55] = 28, /* Enter */
+ [0x5f] = 1, /* Cycle (ESC) */
+
+ [0x61] = 22, /* U */
+ [0x64] = 75 | M, /* Left */
+
+ [0x71] = 23, /* I */
+#if 0
+ [0x75] = 28 | M, /* KP Enter (KP Enter) */
+#else
+ [0x75] = 15, /* KP Enter (Tab) */
+#endif
+};
+
+#undef M
+
+static void n810_kbd_setup(struct n800_s *s)
+{
+ qemu_irq kbd_irq = qdev_get_gpio_in(s->mpu->gpio, N810_KEYBOARD_GPIO);
+ int i;
+
+ for (i = 0; i < 0x80; i++) {
+ s->keymap[i] = -1;
+ }
+ for (i = 0; i < 0x80; i++) {
+ if (n810_keys[i] > 0) {
+ s->keymap[n810_keys[i]] = i;
+ }
+ }
+
+ qemu_add_kbd_event_handler(n810_key_event, s);
+
+ /* Attach the LM8322 keyboard to the I2C bus,
+ * should happen in n8x0_i2c_setup and s->kbd be initialised here. */
+ s->kbd = DEVICE(i2c_slave_create_simple(omap_i2c_bus(s->mpu->i2c[0]),
+ TYPE_LM8323, N810_LM8323_ADDR));
+ qdev_connect_gpio_out(s->kbd, 0, kbd_irq);
+}
+
+/* LCD MIPI DBI-C controller (URAL) */
+struct mipid_s {
+ int resp[4];
+ int param[4];
+ int p;
+ int pm;
+ int cmd;
+
+ int sleep;
+ int booster;
+ int te;
+ int selfcheck;
+ int partial;
+ int normal;
+ int vscr;
+ int invert;
+ int onoff;
+ int gamma;
+ uint32_t id;
+};
+
+static void mipid_reset(struct mipid_s *s)
+{
+ s->pm = 0;
+ s->cmd = 0;
+
+ s->sleep = 1;
+ s->booster = 0;
+ s->selfcheck =
+ (1 << 7) | /* Register loading OK. */
+ (1 << 5) | /* The chip is attached. */
+ (1 << 4); /* Display glass still in one piece. */
+ s->te = 0;
+ s->partial = 0;
+ s->normal = 1;
+ s->vscr = 0;
+ s->invert = 0;
+ s->onoff = 1;
+ s->gamma = 0;
+}
+
+static uint32_t mipid_txrx(void *opaque, uint32_t cmd, int len)
+{
+ struct mipid_s *s = (struct mipid_s *) opaque;
+ uint8_t ret;
+
+ if (len > 9) {
+ hw_error("%s: FIXME: bad SPI word width %i\n", __func__, len);
+ }
+
+ if (s->p >= ARRAY_SIZE(s->resp)) {
+ ret = 0;
+ } else {
+ ret = s->resp[s->p++];
+ }
+ if (s->pm-- > 0) {
+ s->param[s->pm] = cmd;
+ } else {
+ s->cmd = cmd;
+ }
+
+ switch (s->cmd) {
+ case 0x00: /* NOP */
+ break;
+
+ case 0x01: /* SWRESET */
+ mipid_reset(s);
+ break;
+
+ case 0x02: /* BSTROFF */
+ s->booster = 0;
+ break;
+ case 0x03: /* BSTRON */
+ s->booster = 1;
+ break;
+
+ case 0x04: /* RDDID */
+ s->p = 0;
+ s->resp[0] = (s->id >> 16) & 0xff;
+ s->resp[1] = (s->id >> 8) & 0xff;
+ s->resp[2] = (s->id >> 0) & 0xff;
+ break;
+
+ case 0x06: /* RD_RED */
+ case 0x07: /* RD_GREEN */
+ /* XXX the bootloader sometimes issues RD_BLUE meaning RDDID so
+ * for the bootloader one needs to change this. */
+ case 0x08: /* RD_BLUE */
+ s->p = 0;
+ /* TODO: return first pixel components */
+ s->resp[0] = 0x01;
+ break;
+
+ case 0x09: /* RDDST */
+ s->p = 0;
+ s->resp[0] = s->booster << 7;
+ s->resp[1] = (5 << 4) | (s->partial << 2) |
+ (s->sleep << 1) | s->normal;
+ s->resp[2] = (s->vscr << 7) | (s->invert << 5) |
+ (s->onoff << 2) | (s->te << 1) | (s->gamma >> 2);
+ s->resp[3] = s->gamma << 6;
+ break;
+
+ case 0x0a: /* RDDPM */
+ s->p = 0;
+ s->resp[0] = (s->onoff << 2) | (s->normal << 3) | (s->sleep << 4) |
+ (s->partial << 5) | (s->sleep << 6) | (s->booster << 7);
+ break;
+ case 0x0b: /* RDDMADCTR */
+ s->p = 0;
+ s->resp[0] = 0;
+ break;
+ case 0x0c: /* RDDCOLMOD */
+ s->p = 0;
+ s->resp[0] = 5; /* 65K colours */
+ break;
+ case 0x0d: /* RDDIM */
+ s->p = 0;
+ s->resp[0] = (s->invert << 5) | (s->vscr << 7) | s->gamma;
+ break;
+ case 0x0e: /* RDDSM */
+ s->p = 0;
+ s->resp[0] = s->te << 7;
+ break;
+ case 0x0f: /* RDDSDR */
+ s->p = 0;
+ s->resp[0] = s->selfcheck;
+ break;
+
+ case 0x10: /* SLPIN */
+ s->sleep = 1;
+ break;
+ case 0x11: /* SLPOUT */
+ s->sleep = 0;
+ s->selfcheck ^= 1 << 6; /* POFF self-diagnosis Ok */
+ break;
+
+ case 0x12: /* PTLON */
+ s->partial = 1;
+ s->normal = 0;
+ s->vscr = 0;
+ break;
+ case 0x13: /* NORON */
+ s->partial = 0;
+ s->normal = 1;
+ s->vscr = 0;
+ break;
+
+ case 0x20: /* INVOFF */
+ s->invert = 0;
+ break;
+ case 0x21: /* INVON */
+ s->invert = 1;
+ break;
+
+ case 0x22: /* APOFF */
+ case 0x23: /* APON */
+ goto bad_cmd;
+
+ case 0x25: /* WRCNTR */
+ if (s->pm < 0) {
+ s->pm = 1;
+ }
+ goto bad_cmd;
+
+ case 0x26: /* GAMSET */
+ if (!s->pm) {
+ s->gamma = ctz32(s->param[0] & 0xf);
+ if (s->gamma == 32) {
+ s->gamma = -1; /* XXX: should this be 0? */
+ }
+ } else if (s->pm < 0) {
+ s->pm = 1;
+ }
+ break;
+
+ case 0x28: /* DISPOFF */
+ s->onoff = 0;
+ break;
+ case 0x29: /* DISPON */
+ s->onoff = 1;
+ break;
+
+ case 0x2a: /* CASET */
+ case 0x2b: /* RASET */
+ case 0x2c: /* RAMWR */
+ case 0x2d: /* RGBSET */
+ case 0x2e: /* RAMRD */
+ case 0x30: /* PTLAR */
+ case 0x33: /* SCRLAR */
+ goto bad_cmd;
+
+ case 0x34: /* TEOFF */
+ s->te = 0;
+ break;
+ case 0x35: /* TEON */
+ if (!s->pm) {
+ s->te = 1;
+ } else if (s->pm < 0) {
+ s->pm = 1;
+ }
+ break;
+
+ case 0x36: /* MADCTR */
+ goto bad_cmd;
+
+ case 0x37: /* VSCSAD */
+ s->partial = 0;
+ s->normal = 0;
+ s->vscr = 1;
+ break;
+
+ case 0x38: /* IDMOFF */
+ case 0x39: /* IDMON */
+ case 0x3a: /* COLMOD */
+ goto bad_cmd;
+
+ case 0xb0: /* CLKINT / DISCTL */
+ case 0xb1: /* CLKEXT */
+ if (s->pm < 0) {
+ s->pm = 2;
+ }
+ break;
+
+ case 0xb4: /* FRMSEL */
+ break;
+
+ case 0xb5: /* FRM8SEL */
+ case 0xb6: /* TMPRNG / INIESC */
+ case 0xb7: /* TMPHIS / NOP2 */
+ case 0xb8: /* TMPREAD / MADCTL */
+ case 0xba: /* DISTCTR */
+ case 0xbb: /* EPVOL */
+ goto bad_cmd;
+
+ case 0xbd: /* Unknown */
+ s->p = 0;
+ s->resp[0] = 0;
+ s->resp[1] = 1;
+ break;
+
+ case 0xc2: /* IFMOD */
+ if (s->pm < 0) {
+ s->pm = 2;
+ }
+ break;
+
+ case 0xc6: /* PWRCTL */
+ case 0xc7: /* PPWRCTL */
+ case 0xd0: /* EPWROUT */
+ case 0xd1: /* EPWRIN */
+ case 0xd4: /* RDEV */
+ case 0xd5: /* RDRR */
+ goto bad_cmd;
+
+ case 0xda: /* RDID1 */
+ s->p = 0;
+ s->resp[0] = (s->id >> 16) & 0xff;
+ break;
+ case 0xdb: /* RDID2 */
+ s->p = 0;
+ s->resp[0] = (s->id >> 8) & 0xff;
+ break;
+ case 0xdc: /* RDID3 */
+ s->p = 0;
+ s->resp[0] = (s->id >> 0) & 0xff;
+ break;
+
+ default:
+ bad_cmd:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: unknown command 0x%02x\n", __func__, s->cmd);
+ break;
+ }
+
+ return ret;
+}
+
+static void *mipid_init(void)
+{
+ struct mipid_s *s = (struct mipid_s *) g_malloc0(sizeof(*s));
+
+ s->id = 0x838f03;
+ mipid_reset(s);
+
+ return s;
+}
+
+static void n8x0_spi_setup(struct n800_s *s)
+{
+ void *tsc = s->ts.opaque;
+ void *mipid = mipid_init();
+
+ omap_mcspi_attach(s->mpu->mcspi[0], s->ts.txrx, tsc, 0);
+ omap_mcspi_attach(s->mpu->mcspi[0], mipid_txrx, mipid, 1);
+}
+
+/* This task is normally performed by the bootloader. If we're loading
+ * a kernel directly, we need to enable the Blizzard ourselves. */
+static void n800_dss_init(struct rfbi_chip_s *chip)
+{
+ uint8_t *fb_blank;
+
+ chip->write(chip->opaque, 0, 0x2a); /* LCD Width register */
+ chip->write(chip->opaque, 1, 0x64);
+ chip->write(chip->opaque, 0, 0x2c); /* LCD HNDP register */
+ chip->write(chip->opaque, 1, 0x1e);
+ chip->write(chip->opaque, 0, 0x2e); /* LCD Height 0 register */
+ chip->write(chip->opaque, 1, 0xe0);
+ chip->write(chip->opaque, 0, 0x30); /* LCD Height 1 register */
+ chip->write(chip->opaque, 1, 0x01);
+ chip->write(chip->opaque, 0, 0x32); /* LCD VNDP register */
+ chip->write(chip->opaque, 1, 0x06);
+ chip->write(chip->opaque, 0, 0x68); /* Display Mode register */
+ chip->write(chip->opaque, 1, 1); /* Enable bit */
+
+ chip->write(chip->opaque, 0, 0x6c);
+ chip->write(chip->opaque, 1, 0x00); /* Input X Start Position */
+ chip->write(chip->opaque, 1, 0x00); /* Input X Start Position */
+ chip->write(chip->opaque, 1, 0x00); /* Input Y Start Position */
+ chip->write(chip->opaque, 1, 0x00); /* Input Y Start Position */
+ chip->write(chip->opaque, 1, 0x1f); /* Input X End Position */
+ chip->write(chip->opaque, 1, 0x03); /* Input X End Position */
+ chip->write(chip->opaque, 1, 0xdf); /* Input Y End Position */
+ chip->write(chip->opaque, 1, 0x01); /* Input Y End Position */
+ chip->write(chip->opaque, 1, 0x00); /* Output X Start Position */
+ chip->write(chip->opaque, 1, 0x00); /* Output X Start Position */
+ chip->write(chip->opaque, 1, 0x00); /* Output Y Start Position */
+ chip->write(chip->opaque, 1, 0x00); /* Output Y Start Position */
+ chip->write(chip->opaque, 1, 0x1f); /* Output X End Position */
+ chip->write(chip->opaque, 1, 0x03); /* Output X End Position */
+ chip->write(chip->opaque, 1, 0xdf); /* Output Y End Position */
+ chip->write(chip->opaque, 1, 0x01); /* Output Y End Position */
+ chip->write(chip->opaque, 1, 0x01); /* Input Data Format */
+ chip->write(chip->opaque, 1, 0x01); /* Data Source Select */
+
+ fb_blank = memset(g_malloc(800 * 480 * 2), 0xff, 800 * 480 * 2);
+ /* Display Memory Data Port */
+ chip->block(chip->opaque, 1, fb_blank, 800 * 480 * 2, 800);
+ g_free(fb_blank);
+}
+
+static void n8x0_dss_setup(struct n800_s *s)
+{
+ s->blizzard.opaque = s1d13745_init(NULL);
+ s->blizzard.block = s1d13745_write_block;
+ s->blizzard.write = s1d13745_write;
+ s->blizzard.read = s1d13745_read;
+
+ omap_rfbi_attach(s->mpu->dss, 0, &s->blizzard);
+}
+
+static void n8x0_cbus_setup(struct n800_s *s)
+{
+ qemu_irq dat_out = qdev_get_gpio_in(s->mpu->gpio, N8X0_CBUS_DAT_GPIO);
+ qemu_irq retu_irq = qdev_get_gpio_in(s->mpu->gpio, N8X0_RETU_GPIO);
+ qemu_irq tahvo_irq = qdev_get_gpio_in(s->mpu->gpio, N8X0_TAHVO_GPIO);
+
+ CBus *cbus = cbus_init(dat_out);
+
+ qdev_connect_gpio_out(s->mpu->gpio, N8X0_CBUS_CLK_GPIO, cbus->clk);
+ qdev_connect_gpio_out(s->mpu->gpio, N8X0_CBUS_DAT_GPIO, cbus->dat);
+ qdev_connect_gpio_out(s->mpu->gpio, N8X0_CBUS_SEL_GPIO, cbus->sel);
+
+ cbus_attach(cbus, s->retu = retu_init(retu_irq, 1));
+ cbus_attach(cbus, s->tahvo = tahvo_init(tahvo_irq, 1));
+}
+
+static void n8x0_usb_setup(struct n800_s *s)
+{
+ SysBusDevice *dev;
+ s->usb = qdev_new("tusb6010");
+ dev = SYS_BUS_DEVICE(s->usb);
+ sysbus_realize_and_unref(dev, &error_fatal);
+ sysbus_connect_irq(dev, 0,
+ qdev_get_gpio_in(s->mpu->gpio, N8X0_TUSB_INT_GPIO));
+ /* Using the NOR interface */
+ omap_gpmc_attach(s->mpu->gpmc, N8X0_USB_ASYNC_CS,
+ sysbus_mmio_get_region(dev, 0));
+ omap_gpmc_attach(s->mpu->gpmc, N8X0_USB_SYNC_CS,
+ sysbus_mmio_get_region(dev, 1));
+ qdev_connect_gpio_out(s->mpu->gpio, N8X0_TUSB_ENABLE_GPIO,
+ qdev_get_gpio_in(s->usb, 0)); /* tusb_pwr */
+}
+
+/* Setup done before the main bootloader starts by some early setup code
+ * - used when we want to run the main bootloader in emulation. This
+ * isn't documented. */
+static uint32_t n800_pinout[104] = {
+ 0x080f00d8, 0x00d40808, 0x03080808, 0x080800d0,
+ 0x00dc0808, 0x0b0f0f00, 0x080800b4, 0x00c00808,
+ 0x08080808, 0x180800c4, 0x00b80000, 0x08080808,
+ 0x080800bc, 0x00cc0808, 0x08081818, 0x18180128,
+ 0x01241800, 0x18181818, 0x000000f0, 0x01300000,
+ 0x00001b0b, 0x1b0f0138, 0x00e0181b, 0x1b031b0b,
+ 0x180f0078, 0x00740018, 0x0f0f0f1a, 0x00000080,
+ 0x007c0000, 0x00000000, 0x00000088, 0x00840000,
+ 0x00000000, 0x00000094, 0x00980300, 0x0f180003,
+ 0x0000008c, 0x00900f0f, 0x0f0f1b00, 0x0f00009c,
+ 0x01140000, 0x1b1b0f18, 0x0818013c, 0x01400008,
+ 0x00001818, 0x000b0110, 0x010c1800, 0x0b030b0f,
+ 0x181800f4, 0x00f81818, 0x00000018, 0x000000fc,
+ 0x00401808, 0x00000000, 0x0f1b0030, 0x003c0008,
+ 0x00000000, 0x00000038, 0x00340000, 0x00000000,
+ 0x1a080070, 0x00641a1a, 0x08080808, 0x08080060,
+ 0x005c0808, 0x08080808, 0x08080058, 0x00540808,
+ 0x08080808, 0x0808006c, 0x00680808, 0x08080808,
+ 0x000000a8, 0x00b00000, 0x08080808, 0x000000a0,
+ 0x00a40000, 0x00000000, 0x08ff0050, 0x004c0808,
+ 0xffffffff, 0xffff0048, 0x0044ffff, 0xffffffff,
+ 0x000000ac, 0x01040800, 0x08080b0f, 0x18180100,
+ 0x01081818, 0x0b0b1808, 0x1a0300e4, 0x012c0b1a,
+ 0x02020018, 0x0b000134, 0x011c0800, 0x0b1b1b00,
+ 0x0f0000c8, 0x00ec181b, 0x000f0f02, 0x00180118,
+ 0x01200000, 0x0f0b1b1b, 0x0f0200e8, 0x0000020b,
+};
+
+static void n800_setup_nolo_tags(void *sram_base)
+{
+ int i;
+ uint32_t *p = sram_base + 0x8000;
+ uint32_t *v = sram_base + 0xa000;
+
+ memset(p, 0, 0x3000);
+
+ strcpy((void *) (p + 0), "QEMU N800");
+
+ strcpy((void *) (p + 8), "F5");
+
+ stl_p(p + 10, 0x04f70000);
+ strcpy((void *) (p + 9), "RX-34");
+
+ /* RAM size in MB? */
+ stl_p(p + 12, 0x80);
+
+ /* Pointer to the list of tags */
+ stl_p(p + 13, OMAP2_SRAM_BASE + 0x9000);
+
+ /* The NOLO tags start here */
+ p = sram_base + 0x9000;
+#define ADD_TAG(tag, len) \
+ stw_p((uint16_t *) p + 0, tag); \
+ stw_p((uint16_t *) p + 1, len); p++; \
+ stl_p(p++, OMAP2_SRAM_BASE | (((void *) v - sram_base) & 0xffff));
+
+ /* OMAP STI console? Pin out settings? */
+ ADD_TAG(0x6e01, 414);
+ for (i = 0; i < ARRAY_SIZE(n800_pinout); i++) {
+ stl_p(v++, n800_pinout[i]);
+ }
+
+ /* Kernel memsize? */
+ ADD_TAG(0x6e05, 1);
+ stl_p(v++, 2);
+
+ /* NOLO serial console */
+ ADD_TAG(0x6e02, 4);
+ stl_p(v++, XLDR_LL_UART); /* UART number (1 - 3) */
+
+#if 0
+ /* CBUS settings (Retu/AVilma) */
+ ADD_TAG(0x6e03, 6);
+ stw_p((uint16_t *) v + 0, 65); /* CBUS GPIO0 */
+ stw_p((uint16_t *) v + 1, 66); /* CBUS GPIO1 */
+ stw_p((uint16_t *) v + 2, 64); /* CBUS GPIO2 */
+ v += 2;
+#endif
+
+ /* Nokia ASIC BB5 (Retu/Tahvo) */
+ ADD_TAG(0x6e0a, 4);
+ stw_p((uint16_t *) v + 0, 111); /* "Retu" interrupt GPIO */
+ stw_p((uint16_t *) v + 1, 108); /* "Tahvo" interrupt GPIO */
+ v++;
+
+ /* LCD console? */
+ ADD_TAG(0x6e04, 4);
+ stw_p((uint16_t *) v + 0, 30); /* ??? */
+ stw_p((uint16_t *) v + 1, 24); /* ??? */
+ v++;
+
+#if 0
+ /* LCD settings */
+ ADD_TAG(0x6e06, 2);
+ stw_p((uint16_t *) (v++), 15); /* ??? */
+#endif
+
+ /* I^2C (Menelaus) */
+ ADD_TAG(0x6e07, 4);
+ stl_p(v++, 0x00720000); /* ??? */
+
+ /* Unknown */
+ ADD_TAG(0x6e0b, 6);
+ stw_p((uint16_t *) v + 0, 94); /* ??? */
+ stw_p((uint16_t *) v + 1, 23); /* ??? */
+ stw_p((uint16_t *) v + 2, 0); /* ??? */
+ v += 2;
+
+ /* OMAP gpio switch info */
+ ADD_TAG(0x6e0c, 80);
+ strcpy((void *) v, "bat_cover"); v += 3;
+ stw_p((uint16_t *) v + 0, 110); /* GPIO num ??? */
+ stw_p((uint16_t *) v + 1, 1); /* GPIO num ??? */
+ v += 2;
+ strcpy((void *) v, "cam_act"); v += 3;
+ stw_p((uint16_t *) v + 0, 95); /* GPIO num ??? */
+ stw_p((uint16_t *) v + 1, 32); /* GPIO num ??? */
+ v += 2;
+ strcpy((void *) v, "cam_turn"); v += 3;
+ stw_p((uint16_t *) v + 0, 12); /* GPIO num ??? */
+ stw_p((uint16_t *) v + 1, 33); /* GPIO num ??? */
+ v += 2;
+ strcpy((void *) v, "headphone"); v += 3;
+ stw_p((uint16_t *) v + 0, 107); /* GPIO num ??? */
+ stw_p((uint16_t *) v + 1, 17); /* GPIO num ??? */
+ v += 2;
+
+ /* Bluetooth */
+ ADD_TAG(0x6e0e, 12);
+ stl_p(v++, 0x5c623d01); /* ??? */
+ stl_p(v++, 0x00000201); /* ??? */
+ stl_p(v++, 0x00000000); /* ??? */
+
+ /* CX3110x WLAN settings */
+ ADD_TAG(0x6e0f, 8);
+ stl_p(v++, 0x00610025); /* ??? */
+ stl_p(v++, 0xffff0057); /* ??? */
+
+ /* MMC host settings */
+ ADD_TAG(0x6e10, 12);
+ stl_p(v++, 0xffff000f); /* ??? */
+ stl_p(v++, 0xffffffff); /* ??? */
+ stl_p(v++, 0x00000060); /* ??? */
+
+ /* OneNAND chip select */
+ ADD_TAG(0x6e11, 10);
+ stl_p(v++, 0x00000401); /* ??? */
+ stl_p(v++, 0x0002003a); /* ??? */
+ stl_p(v++, 0x00000002); /* ??? */
+
+ /* TEA5761 sensor settings */
+ ADD_TAG(0x6e12, 2);
+ stl_p(v++, 93); /* GPIO num ??? */
+
+#if 0
+ /* Unknown tag */
+ ADD_TAG(6e09, 0);
+
+ /* Kernel UART / console */
+ ADD_TAG(6e12, 0);
+#endif
+
+ /* End of the list */
+ stl_p(p++, 0x00000000);
+ stl_p(p++, 0x00000000);
+}
+
+/* This task is normally performed by the bootloader. If we're loading
+ * a kernel directly, we need to set up GPMC mappings ourselves. */
+static void n800_gpmc_init(struct n800_s *s)
+{
+ uint32_t config7 =
+ (0xf << 8) | /* MASKADDRESS */
+ (1 << 6) | /* CSVALID */
+ (4 << 0); /* BASEADDRESS */
+
+ cpu_physical_memory_write(0x6800a078, /* GPMC_CONFIG7_0 */
+ &config7, sizeof(config7));
+}
+
+/* Setup sequence done by the bootloader */
+static void n8x0_boot_init(void *opaque)
+{
+ struct n800_s *s = (struct n800_s *) opaque;
+ uint32_t buf;
+
+ /* PRCM setup */
+#define omap_writel(addr, val) \
+ buf = (val); \
+ cpu_physical_memory_write(addr, &buf, sizeof(buf))
+
+ omap_writel(0x48008060, 0x41); /* PRCM_CLKSRC_CTRL */
+ omap_writel(0x48008070, 1); /* PRCM_CLKOUT_CTRL */
+ omap_writel(0x48008078, 0); /* PRCM_CLKEMUL_CTRL */
+ omap_writel(0x48008090, 0); /* PRCM_VOLTSETUP */
+ omap_writel(0x48008094, 0); /* PRCM_CLKSSETUP */
+ omap_writel(0x48008098, 0); /* PRCM_POLCTRL */
+ omap_writel(0x48008140, 2); /* CM_CLKSEL_MPU */
+ omap_writel(0x48008148, 0); /* CM_CLKSTCTRL_MPU */
+ omap_writel(0x48008158, 1); /* RM_RSTST_MPU */
+ omap_writel(0x480081c8, 0x15); /* PM_WKDEP_MPU */
+ omap_writel(0x480081d4, 0x1d4); /* PM_EVGENCTRL_MPU */
+ omap_writel(0x480081d8, 0); /* PM_EVEGENONTIM_MPU */
+ omap_writel(0x480081dc, 0); /* PM_EVEGENOFFTIM_MPU */
+ omap_writel(0x480081e0, 0xc); /* PM_PWSTCTRL_MPU */
+ omap_writel(0x48008200, 0x047e7ff7); /* CM_FCLKEN1_CORE */
+ omap_writel(0x48008204, 0x00000004); /* CM_FCLKEN2_CORE */
+ omap_writel(0x48008210, 0x047e7ff1); /* CM_ICLKEN1_CORE */
+ omap_writel(0x48008214, 0x00000004); /* CM_ICLKEN2_CORE */
+ omap_writel(0x4800821c, 0x00000000); /* CM_ICLKEN4_CORE */
+ omap_writel(0x48008230, 0); /* CM_AUTOIDLE1_CORE */
+ omap_writel(0x48008234, 0); /* CM_AUTOIDLE2_CORE */
+ omap_writel(0x48008238, 7); /* CM_AUTOIDLE3_CORE */
+ omap_writel(0x4800823c, 0); /* CM_AUTOIDLE4_CORE */
+ omap_writel(0x48008240, 0x04360626); /* CM_CLKSEL1_CORE */
+ omap_writel(0x48008244, 0x00000014); /* CM_CLKSEL2_CORE */
+ omap_writel(0x48008248, 0); /* CM_CLKSTCTRL_CORE */
+ omap_writel(0x48008300, 0x00000000); /* CM_FCLKEN_GFX */
+ omap_writel(0x48008310, 0x00000000); /* CM_ICLKEN_GFX */
+ omap_writel(0x48008340, 0x00000001); /* CM_CLKSEL_GFX */
+ omap_writel(0x48008400, 0x00000004); /* CM_FCLKEN_WKUP */
+ omap_writel(0x48008410, 0x00000004); /* CM_ICLKEN_WKUP */
+ omap_writel(0x48008440, 0x00000000); /* CM_CLKSEL_WKUP */
+ omap_writel(0x48008500, 0x000000cf); /* CM_CLKEN_PLL */
+ omap_writel(0x48008530, 0x0000000c); /* CM_AUTOIDLE_PLL */
+ omap_writel(0x48008540, /* CM_CLKSEL1_PLL */
+ (0x78 << 12) | (6 << 8));
+ omap_writel(0x48008544, 2); /* CM_CLKSEL2_PLL */
+
+ /* GPMC setup */
+ n800_gpmc_init(s);
+
+ /* Video setup */
+ n800_dss_init(&s->blizzard);
+
+ /* CPU setup */
+ s->mpu->cpu->env.GE = 0x5;
+
+ /* If the machine has a slided keyboard, open it */
+ if (s->kbd) {
+ qemu_irq_raise(qdev_get_gpio_in(s->mpu->gpio, N810_SLIDE_GPIO));
+ }
+}
+
+#define OMAP_TAG_NOKIA_BT 0x4e01
+#define OMAP_TAG_WLAN_CX3110X 0x4e02
+#define OMAP_TAG_CBUS 0x4e03
+#define OMAP_TAG_EM_ASIC_BB5 0x4e04
+
+static struct omap_gpiosw_info_s {
+ const char *name;
+ int line;
+ int type;
+} n800_gpiosw_info[] = {
+ {
+ "bat_cover", N800_BAT_COVER_GPIO,
+ OMAP_GPIOSW_TYPE_COVER | OMAP_GPIOSW_INVERTED,
+ }, {
+ "cam_act", N800_CAM_ACT_GPIO,
+ OMAP_GPIOSW_TYPE_ACTIVITY,
+ }, {
+ "cam_turn", N800_CAM_TURN_GPIO,
+ OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_INVERTED,
+ }, {
+ "headphone", N8X0_HEADPHONE_GPIO,
+ OMAP_GPIOSW_TYPE_CONNECTION | OMAP_GPIOSW_INVERTED,
+ },
+ { NULL }
+}, n810_gpiosw_info[] = {
+ {
+ "gps_reset", N810_GPS_RESET_GPIO,
+ OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_OUTPUT,
+ }, {
+ "gps_wakeup", N810_GPS_WAKEUP_GPIO,
+ OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_OUTPUT,
+ }, {
+ "headphone", N8X0_HEADPHONE_GPIO,
+ OMAP_GPIOSW_TYPE_CONNECTION | OMAP_GPIOSW_INVERTED,
+ }, {
+ "kb_lock", N810_KB_LOCK_GPIO,
+ OMAP_GPIOSW_TYPE_COVER | OMAP_GPIOSW_INVERTED,
+ }, {
+ "sleepx_led", N810_SLEEPX_LED_GPIO,
+ OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_INVERTED | OMAP_GPIOSW_OUTPUT,
+ }, {
+ "slide", N810_SLIDE_GPIO,
+ OMAP_GPIOSW_TYPE_COVER | OMAP_GPIOSW_INVERTED,
+ },
+ { NULL }
+};
+
+static struct omap_partition_info_s {
+ uint32_t offset;
+ uint32_t size;
+ int mask;
+ const char *name;
+} n800_part_info[] = {
+ { 0x00000000, 0x00020000, 0x3, "bootloader" },
+ { 0x00020000, 0x00060000, 0x0, "config" },
+ { 0x00080000, 0x00200000, 0x0, "kernel" },
+ { 0x00280000, 0x00200000, 0x3, "initfs" },
+ { 0x00480000, 0x0fb80000, 0x3, "rootfs" },
+
+ { 0, 0, 0, NULL }
+}, n810_part_info[] = {
+ { 0x00000000, 0x00020000, 0x3, "bootloader" },
+ { 0x00020000, 0x00060000, 0x0, "config" },
+ { 0x00080000, 0x00220000, 0x0, "kernel" },
+ { 0x002a0000, 0x00400000, 0x0, "initfs" },
+ { 0x006a0000, 0x0f960000, 0x0, "rootfs" },
+
+ { 0, 0, 0, NULL }
+};
+
+static uint8_t n8x0_bd_addr[6] = { N8X0_BD_ADDR };
+
+static int n8x0_atag_setup(void *p, int model)
+{
+ uint8_t *b;
+ uint16_t *w;
+ uint32_t *l;
+ struct omap_gpiosw_info_s *gpiosw;
+ struct omap_partition_info_s *partition;
+ const char *tag;
+
+ w = p;
+
+ stw_p(w++, OMAP_TAG_UART); /* u16 tag */
+ stw_p(w++, 4); /* u16 len */
+ stw_p(w++, (1 << 2) | (1 << 1) | (1 << 0)); /* uint enabled_uarts */
+ w++;
+
+#if 0
+ stw_p(w++, OMAP_TAG_SERIAL_CONSOLE); /* u16 tag */
+ stw_p(w++, 4); /* u16 len */
+ stw_p(w++, XLDR_LL_UART + 1); /* u8 console_uart */
+ stw_p(w++, 115200); /* u32 console_speed */
+#endif
+
+ stw_p(w++, OMAP_TAG_LCD); /* u16 tag */
+ stw_p(w++, 36); /* u16 len */
+ strcpy((void *) w, "QEMU LCD panel"); /* char panel_name[16] */
+ w += 8;
+ strcpy((void *) w, "blizzard"); /* char ctrl_name[16] */
+ w += 8;
+ stw_p(w++, N810_BLIZZARD_RESET_GPIO); /* TODO: n800 s16 nreset_gpio */
+ stw_p(w++, 24); /* u8 data_lines */
+
+ stw_p(w++, OMAP_TAG_CBUS); /* u16 tag */
+ stw_p(w++, 8); /* u16 len */
+ stw_p(w++, N8X0_CBUS_CLK_GPIO); /* s16 clk_gpio */
+ stw_p(w++, N8X0_CBUS_DAT_GPIO); /* s16 dat_gpio */
+ stw_p(w++, N8X0_CBUS_SEL_GPIO); /* s16 sel_gpio */
+ w++;
+
+ stw_p(w++, OMAP_TAG_EM_ASIC_BB5); /* u16 tag */
+ stw_p(w++, 4); /* u16 len */
+ stw_p(w++, N8X0_RETU_GPIO); /* s16 retu_irq_gpio */
+ stw_p(w++, N8X0_TAHVO_GPIO); /* s16 tahvo_irq_gpio */
+
+ gpiosw = (model == 810) ? n810_gpiosw_info : n800_gpiosw_info;
+ for (; gpiosw->name; gpiosw++) {
+ stw_p(w++, OMAP_TAG_GPIO_SWITCH); /* u16 tag */
+ stw_p(w++, 20); /* u16 len */
+ strcpy((void *) w, gpiosw->name); /* char name[12] */
+ w += 6;
+ stw_p(w++, gpiosw->line); /* u16 gpio */
+ stw_p(w++, gpiosw->type);
+ stw_p(w++, 0);
+ stw_p(w++, 0);
+ }
+
+ stw_p(w++, OMAP_TAG_NOKIA_BT); /* u16 tag */
+ stw_p(w++, 12); /* u16 len */
+ b = (void *) w;
+ stb_p(b++, 0x01); /* u8 chip_type (CSR) */
+ stb_p(b++, N8X0_BT_WKUP_GPIO); /* u8 bt_wakeup_gpio */
+ stb_p(b++, N8X0_BT_HOST_WKUP_GPIO); /* u8 host_wakeup_gpio */
+ stb_p(b++, N8X0_BT_RESET_GPIO); /* u8 reset_gpio */
+ stb_p(b++, BT_UART + 1); /* u8 bt_uart */
+ memcpy(b, &n8x0_bd_addr, 6); /* u8 bd_addr[6] */
+ b += 6;
+ stb_p(b++, 0x02); /* u8 bt_sysclk (38.4) */
+ w = (void *) b;
+
+ stw_p(w++, OMAP_TAG_WLAN_CX3110X); /* u16 tag */
+ stw_p(w++, 8); /* u16 len */
+ stw_p(w++, 0x25); /* u8 chip_type */
+ stw_p(w++, N8X0_WLAN_PWR_GPIO); /* s16 power_gpio */
+ stw_p(w++, N8X0_WLAN_IRQ_GPIO); /* s16 irq_gpio */
+ stw_p(w++, -1); /* s16 spi_cs_gpio */
+
+ stw_p(w++, OMAP_TAG_MMC); /* u16 tag */
+ stw_p(w++, 16); /* u16 len */
+ if (model == 810) {
+ stw_p(w++, 0x23f); /* unsigned flags */
+ stw_p(w++, -1); /* s16 power_pin */
+ stw_p(w++, -1); /* s16 switch_pin */
+ stw_p(w++, -1); /* s16 wp_pin */
+ stw_p(w++, 0x240); /* unsigned flags */
+ stw_p(w++, 0xc000); /* s16 power_pin */
+ stw_p(w++, 0x0248); /* s16 switch_pin */
+ stw_p(w++, 0xc000); /* s16 wp_pin */
+ } else {
+ stw_p(w++, 0xf); /* unsigned flags */
+ stw_p(w++, -1); /* s16 power_pin */
+ stw_p(w++, -1); /* s16 switch_pin */
+ stw_p(w++, -1); /* s16 wp_pin */
+ stw_p(w++, 0); /* unsigned flags */
+ stw_p(w++, 0); /* s16 power_pin */
+ stw_p(w++, 0); /* s16 switch_pin */
+ stw_p(w++, 0); /* s16 wp_pin */
+ }
+
+ stw_p(w++, OMAP_TAG_TEA5761); /* u16 tag */
+ stw_p(w++, 4); /* u16 len */
+ stw_p(w++, N8X0_TEA5761_CS_GPIO); /* u16 enable_gpio */
+ w++;
+
+ partition = (model == 810) ? n810_part_info : n800_part_info;
+ for (; partition->name; partition++) {
+ stw_p(w++, OMAP_TAG_PARTITION); /* u16 tag */
+ stw_p(w++, 28); /* u16 len */
+ strcpy((void *) w, partition->name); /* char name[16] */
+ l = (void *) (w + 8);
+ stl_p(l++, partition->size); /* unsigned int size */
+ stl_p(l++, partition->offset); /* unsigned int offset */
+ stl_p(l++, partition->mask); /* unsigned int mask_flags */
+ w = (void *) l;
+ }
+
+ stw_p(w++, OMAP_TAG_BOOT_REASON); /* u16 tag */
+ stw_p(w++, 12); /* u16 len */
+#if 0
+ strcpy((void *) w, "por"); /* char reason_str[12] */
+ strcpy((void *) w, "charger"); /* char reason_str[12] */
+ strcpy((void *) w, "32wd_to"); /* char reason_str[12] */
+ strcpy((void *) w, "sw_rst"); /* char reason_str[12] */
+ strcpy((void *) w, "mbus"); /* char reason_str[12] */
+ strcpy((void *) w, "unknown"); /* char reason_str[12] */
+ strcpy((void *) w, "swdg_to"); /* char reason_str[12] */
+ strcpy((void *) w, "sec_vio"); /* char reason_str[12] */
+ strcpy((void *) w, "pwr_key"); /* char reason_str[12] */
+ strcpy((void *) w, "rtc_alarm"); /* char reason_str[12] */
+#else
+ strcpy((void *) w, "pwr_key"); /* char reason_str[12] */
+#endif
+ w += 6;
+
+ tag = (model == 810) ? "RX-44" : "RX-34";
+ stw_p(w++, OMAP_TAG_VERSION_STR); /* u16 tag */
+ stw_p(w++, 24); /* u16 len */
+ strcpy((void *) w, "product"); /* char component[12] */
+ w += 6;
+ strcpy((void *) w, tag); /* char version[12] */
+ w += 6;
+
+ stw_p(w++, OMAP_TAG_VERSION_STR); /* u16 tag */
+ stw_p(w++, 24); /* u16 len */
+ strcpy((void *) w, "hw-build"); /* char component[12] */
+ w += 6;
+ strcpy((void *) w, "QEMU ");
+ pstrcat((void *) w, 12, qemu_hw_version()); /* char version[12] */
+ w += 6;
+
+ tag = (model == 810) ? "1.1.10-qemu" : "1.1.6-qemu";
+ stw_p(w++, OMAP_TAG_VERSION_STR); /* u16 tag */
+ stw_p(w++, 24); /* u16 len */
+ strcpy((void *) w, "nolo"); /* char component[12] */
+ w += 6;
+ strcpy((void *) w, tag); /* char version[12] */
+ w += 6;
+
+ return (void *) w - p;
+}
+
+static int n800_atag_setup(const struct arm_boot_info *info, void *p)
+{
+ return n8x0_atag_setup(p, 800);
+}
+
+static int n810_atag_setup(const struct arm_boot_info *info, void *p)
+{
+ return n8x0_atag_setup(p, 810);
+}
+
+static void n8x0_init(MachineState *machine,
+ struct arm_boot_info *binfo, int model)
+{
+ struct n800_s *s = (struct n800_s *) g_malloc0(sizeof(*s));
+ MachineClass *mc = MACHINE_GET_CLASS(machine);
+
+ if (machine->ram_size != mc->default_ram_size) {
+ char *sz = size_to_str(mc->default_ram_size);
+ error_report("Invalid RAM size, should be %s", sz);
+ g_free(sz);
+ exit(EXIT_FAILURE);
+ }
+ binfo->ram_size = machine->ram_size;
+
+ memory_region_add_subregion(get_system_memory(), OMAP2_Q2_BASE,
+ machine->ram);
+
+ s->mpu = omap2420_mpu_init(machine->ram, machine->cpu_type);
+
+ /* Setup peripherals
+ *
+ * Believed external peripherals layout in the N810:
+ * (spi bus 1)
+ * tsc2005
+ * lcd_mipid
+ * (spi bus 2)
+ * Conexant cx3110x (WLAN)
+ * optional: pc2400m (WiMAX)
+ * (i2c bus 0)
+ * TLV320AIC33 (audio codec)
+ * TCM825x (camera by Toshiba)
+ * lp5521 (clever LEDs)
+ * tsl2563 (light sensor, hwmon, model 7, rev. 0)
+ * lm8323 (keypad, manf 00, rev 04)
+ * (i2c bus 1)
+ * tmp105 (temperature sensor, hwmon)
+ * menelaus (pm)
+ * (somewhere on i2c - maybe N800-only)
+ * tea5761 (FM tuner)
+ * (serial 0)
+ * GPS
+ * (some serial port)
+ * csr41814 (Bluetooth)
+ */
+ n8x0_gpio_setup(s);
+ n8x0_nand_setup(s);
+ n8x0_i2c_setup(s);
+ if (model == 800) {
+ n800_tsc_kbd_setup(s);
+ } else if (model == 810) {
+ n810_tsc_setup(s);
+ n810_kbd_setup(s);
+ }
+ n8x0_spi_setup(s);
+ n8x0_dss_setup(s);
+ n8x0_cbus_setup(s);
+ if (machine_usb(machine)) {
+ n8x0_usb_setup(s);
+ }
+
+ if (machine->kernel_filename) {
+ /* Or at the linux loader. */
+ arm_load_kernel(s->mpu->cpu, machine, binfo);
+
+ qemu_register_reset(n8x0_boot_init, s);
+ }
+
+ if (option_rom[0].name &&
+ (machine->boot_order[0] == 'n' || !machine->kernel_filename)) {
+ uint8_t *nolo_tags = g_new(uint8_t, 0x10000);
+ /* No, wait, better start at the ROM. */
+ s->mpu->cpu->env.regs[15] = OMAP2_Q2_BASE + 0x400000;
+
+ /*
+ * This is intended for loading the `secondary.bin' program from
+ * Nokia images (the NOLO bootloader). The entry point seems
+ * to be at OMAP2_Q2_BASE + 0x400000.
+ *
+ * The `2nd.bin' files contain some kind of earlier boot code and
+ * for them the entry point needs to be set to OMAP2_SRAM_BASE.
+ *
+ * The code above is for loading the `zImage' file from Nokia
+ * images.
+ */
+ if (load_image_targphys(option_rom[0].name,
+ OMAP2_Q2_BASE + 0x400000,
+ machine->ram_size - 0x400000) < 0) {
+ error_report("Failed to load secondary bootloader %s",
+ option_rom[0].name);
+ exit(EXIT_FAILURE);
+ }
+
+ n800_setup_nolo_tags(nolo_tags);
+ cpu_physical_memory_write(OMAP2_SRAM_BASE, nolo_tags, 0x10000);
+ g_free(nolo_tags);
+ }
+}
+
+static struct arm_boot_info n800_binfo = {
+ .loader_start = OMAP2_Q2_BASE,
+ .board_id = 0x4f7,
+ .atag_board = n800_atag_setup,
+};
+
+static struct arm_boot_info n810_binfo = {
+ .loader_start = OMAP2_Q2_BASE,
+ /* 0x60c and 0x6bf (WiMAX Edition) have been assigned but are not
+ * used by some older versions of the bootloader and 5555 is used
+ * instead (including versions that shipped with many devices). */
+ .board_id = 0x60c,
+ .atag_board = n810_atag_setup,
+};
+
+static void n800_init(MachineState *machine)
+{
+ n8x0_init(machine, &n800_binfo, 800);
+}
+
+static void n810_init(MachineState *machine)
+{
+ n8x0_init(machine, &n810_binfo, 810);
+}
+
+static void n800_class_init(ObjectClass *oc, void *data)
+{
+ MachineClass *mc = MACHINE_CLASS(oc);
+
+ mc->desc = "Nokia N800 tablet aka. RX-34 (OMAP2420)";
+ mc->init = n800_init;
+ mc->default_boot_order = "";
+ mc->ignore_memory_transaction_failures = true;
+ mc->default_cpu_type = ARM_CPU_TYPE_NAME("arm1136-r2");
+ /* Actually two chips of 0x4000000 bytes each */
+ mc->default_ram_size = 0x08000000;
+ mc->default_ram_id = "omap2.dram";
+}
+
+static const TypeInfo n800_type = {
+ .name = MACHINE_TYPE_NAME("n800"),
+ .parent = TYPE_MACHINE,
+ .class_init = n800_class_init,
+};
+
+static void n810_class_init(ObjectClass *oc, void *data)
+{
+ MachineClass *mc = MACHINE_CLASS(oc);
+
+ mc->desc = "Nokia N810 tablet aka. RX-44 (OMAP2420)";
+ mc->init = n810_init;
+ mc->default_boot_order = "";
+ mc->ignore_memory_transaction_failures = true;
+ mc->default_cpu_type = ARM_CPU_TYPE_NAME("arm1136-r2");
+ /* Actually two chips of 0x4000000 bytes each */
+ mc->default_ram_size = 0x08000000;
+ mc->default_ram_id = "omap2.dram";
+}
+
+static const TypeInfo n810_type = {
+ .name = MACHINE_TYPE_NAME("n810"),
+ .parent = TYPE_MACHINE,
+ .class_init = n810_class_init,
+};
+
+static void nseries_machine_init(void)
+{
+ type_register_static(&n800_type);
+ type_register_static(&n810_type);
+}
+
+type_init(nseries_machine_init)