diff options
Diffstat (limited to 'hw/misc/macio/gpio.c')
| -rw-r--r-- | hw/misc/macio/gpio.c | 219 |
1 files changed, 219 insertions, 0 deletions
diff --git a/hw/misc/macio/gpio.c b/hw/misc/macio/gpio.c new file mode 100644 index 000000000..b1bcf830c --- /dev/null +++ b/hw/misc/macio/gpio.c @@ -0,0 +1,219 @@ +/* + * PowerMac NewWorld MacIO GPIO emulation + * + * Copyright (c) 2016 Benjamin Herrenschmidt + * Copyright (c) 2018 Mark Cave-Ayland + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "hw/ppc/mac.h" +#include "hw/qdev-properties.h" +#include "migration/vmstate.h" +#include "hw/misc/macio/macio.h" +#include "hw/misc/macio/gpio.h" +#include "hw/nmi.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "trace.h" + + +void macio_set_gpio(MacIOGPIOState *s, uint32_t gpio, bool state) +{ + uint8_t new_reg; + + trace_macio_set_gpio(gpio, state); + + if (s->gpio_regs[gpio] & 4) { + qemu_log_mask(LOG_GUEST_ERROR, + "GPIO: Setting GPIO %d while it's an output\n", gpio); + } + + new_reg = s->gpio_regs[gpio] & ~2; + if (state) { + new_reg |= 2; + } + + if (new_reg == s->gpio_regs[gpio]) { + return; + } + + s->gpio_regs[gpio] = new_reg; + + /* + * Note that we probably need to get access to the MPIC config to + * decode polarity since qemu always use "raise" regardless. + * + * For now, we hard wire known GPIOs + */ + + switch (gpio) { + case 1: + /* Level low */ + if (!state) { + trace_macio_gpio_irq_assert(gpio); + qemu_irq_raise(s->gpio_extirqs[gpio]); + } else { + trace_macio_gpio_irq_deassert(gpio); + qemu_irq_lower(s->gpio_extirqs[gpio]); + } + break; + + case 9: + /* Edge, triggered by NMI below */ + if (state) { + trace_macio_gpio_irq_assert(gpio); + qemu_irq_raise(s->gpio_extirqs[gpio]); + } else { + trace_macio_gpio_irq_deassert(gpio); + qemu_irq_lower(s->gpio_extirqs[gpio]); + } + break; + + default: + qemu_log_mask(LOG_UNIMP, "GPIO: setting unimplemented GPIO %d", gpio); + } +} + +static void macio_gpio_write(void *opaque, hwaddr addr, uint64_t value, + unsigned size) +{ + MacIOGPIOState *s = opaque; + uint8_t ibit; + + trace_macio_gpio_write(addr, value); + + /* Levels regs are read-only */ + if (addr < 8) { + return; + } + + addr -= 8; + if (addr < 36) { + value &= ~2; + + if (value & 4) { + ibit = (value & 1) << 1; + } else { + ibit = s->gpio_regs[addr] & 2; + } + + s->gpio_regs[addr] = value | ibit; + } +} + +static uint64_t macio_gpio_read(void *opaque, hwaddr addr, unsigned size) +{ + MacIOGPIOState *s = opaque; + uint64_t val = 0; + + /* Levels regs */ + if (addr < 8) { + val = s->gpio_levels[addr]; + } else { + addr -= 8; + + if (addr < 36) { + val = s->gpio_regs[addr]; + } + } + + trace_macio_gpio_write(addr, val); + return val; +} + +static const MemoryRegionOps macio_gpio_ops = { + .read = macio_gpio_read, + .write = macio_gpio_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .impl = { + .min_access_size = 1, + .max_access_size = 1, + }, +}; + +static void macio_gpio_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + MacIOGPIOState *s = MACIO_GPIO(obj); + int i; + + for (i = 0; i < 10; i++) { + sysbus_init_irq(sbd, &s->gpio_extirqs[i]); + } + + memory_region_init_io(&s->gpiomem, OBJECT(s), &macio_gpio_ops, obj, + "gpio", 0x30); + sysbus_init_mmio(sbd, &s->gpiomem); +} + +static const VMStateDescription vmstate_macio_gpio = { + .name = "macio_gpio", + .version_id = 0, + .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_UINT8_ARRAY(gpio_levels, MacIOGPIOState, 8), + VMSTATE_UINT8_ARRAY(gpio_regs, MacIOGPIOState, 36), + VMSTATE_END_OF_LIST() + } +}; + +static void macio_gpio_reset(DeviceState *dev) +{ + MacIOGPIOState *s = MACIO_GPIO(dev); + + /* GPIO 1 is up by default */ + macio_set_gpio(s, 1, true); +} + +static void macio_gpio_nmi(NMIState *n, int cpu_index, Error **errp) +{ + macio_set_gpio(MACIO_GPIO(n), 9, true); + macio_set_gpio(MACIO_GPIO(n), 9, false); +} + +static void macio_gpio_class_init(ObjectClass *oc, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(oc); + NMIClass *nc = NMI_CLASS(oc); + + dc->reset = macio_gpio_reset; + dc->vmsd = &vmstate_macio_gpio; + nc->nmi_monitor_handler = macio_gpio_nmi; +} + +static const TypeInfo macio_gpio_init_info = { + .name = TYPE_MACIO_GPIO, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(MacIOGPIOState), + .instance_init = macio_gpio_init, + .class_init = macio_gpio_class_init, + .interfaces = (InterfaceInfo[]) { + { TYPE_NMI }, + { } + }, +}; + +static void macio_gpio_register_types(void) +{ + type_register_static(&macio_gpio_init_info); +} + +type_init(macio_gpio_register_types) |