diff options
Diffstat (limited to 'hw/net/can/can_sja1000.h')
| -rw-r--r-- | hw/net/can/can_sja1000.h | 147 |
1 files changed, 147 insertions, 0 deletions
diff --git a/hw/net/can/can_sja1000.h b/hw/net/can/can_sja1000.h new file mode 100644 index 000000000..7ca9cd681 --- /dev/null +++ b/hw/net/can/can_sja1000.h @@ -0,0 +1,147 @@ +/* + * CAN device - SJA1000 chip emulation for QEMU + * + * Copyright (c) 2013-2014 Jin Yang + * Copyright (c) 2014-2018 Pavel Pisa + * + * Initial development supported by Google GSoC 2013 from RTEMS project slot + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ +#ifndef HW_CAN_SJA1000_H +#define HW_CAN_SJA1000_H + +#include "exec/hwaddr.h" +#include "net/can_emu.h" + +#define CAN_SJA_MEM_SIZE 128 + +/* The max size for a message buffer, EFF and DLC=8, DS-p39 */ +#define SJA_MSG_MAX_LEN 13 +/* The receive buffer size. */ +#define SJA_RCV_BUF_LEN 64 + +typedef struct CanSJA1000State { + /* PeliCAN state and registers sorted by address */ + uint8_t mode; /* 0 .. Mode register, DS-p26 */ + /* 1 .. Command register */ + uint8_t status_pel; /* 2 .. Status register, p15 */ + uint8_t interrupt_pel; /* 3 .. Interrupt register */ + uint8_t interrupt_en; /* 4 .. Interrupt Enable register */ + uint8_t rxmsg_cnt; /* 29 .. RX message counter. DS-p49 */ + uint8_t rxbuf_start; /* 30 .. RX buffer start address, DS-p49 */ + uint8_t clock; /* 31 .. Clock Divider register, DS-p55 */ + + uint8_t code_mask[8]; /* 16~23 */ + uint8_t tx_buff[13]; /* 96~108 .. transmit buffer */ + /* 10~19 .. transmit buffer for BasicCAN */ + + uint8_t rx_buff[SJA_RCV_BUF_LEN]; /* 32~95 .. 64bytes Rx FIFO */ + uint32_t rx_ptr; /* Count by bytes. */ + uint32_t rx_cnt; /* Count by bytes. */ + + /* PeliCAN state and registers sorted by address */ + uint8_t control; /* 0 .. Control register */ + /* 1 .. Command register */ + uint8_t status_bas; /* 2 .. Status register */ + uint8_t interrupt_bas; /* 3 .. Interrupt register */ + uint8_t code; /* 4 .. Acceptance code register */ + uint8_t mask; /* 5 .. Acceptance mask register */ + + qemu_can_filter filter[4]; + + qemu_irq irq; + CanBusClientState bus_client; +} CanSJA1000State; + +/* PeliCAN mode */ +enum SJA1000_PeliCAN_regs { + SJA_MOD = 0x00, /* Mode control register */ + SJA_CMR = 0x01, /* Command register */ + SJA_SR = 0x02, /* Status register */ + SJA_IR = 0x03, /* Interrupt register */ + SJA_IER = 0x04, /* Interrupt Enable */ + SJA_BTR0 = 0x06, /* Bus Timing register 0 */ + SJA_BTR1 = 0x07, /* Bus Timing register 1 */ + SJA_OCR = 0x08, /* Output Control register */ + SJA_ALC = 0x0b, /* Arbitration Lost Capture */ + SJA_ECC = 0x0c, /* Error Code Capture */ + SJA_EWLR = 0x0d, /* Error Warning Limit */ + SJA_RXERR = 0x0e, /* RX Error Counter */ + SJA_TXERR0 = 0x0e, /* TX Error Counter */ + SJA_TXERR1 = 0x0f, + SJA_RMC = 0x1d, /* Rx Message Counter + * number of messages in RX FIFO + */ + SJA_RBSA = 0x1e, /* Rx Buffer Start Addr + * address of current message + */ + SJA_FRM = 0x10, /* Transmit Buffer + * write: Receive Buffer + * read: Frame Information + */ +/* + * ID bytes (11 bits in 0 and 1 for standard message or + * 16 bits in 0,1 and 13 bits in 2,3 for extended message) + * The most significant bit of ID is placed in MSB + * position of ID0 register. + */ + SJA_ID0 = 0x11, /* ID for standard and extended frames */ + SJA_ID1 = 0x12, + SJA_ID2 = 0x13, /* ID cont. for extended frames */ + SJA_ID3 = 0x14, + + SJA_DATS = 0x13, /* Data start standard frame */ + SJA_DATE = 0x15, /* Data start extended frame */ + SJA_ACR0 = 0x10, /* Acceptance Code (4 bytes) in RESET mode */ + SJA_AMR0 = 0x14, /* Acceptance Mask (4 bytes) in RESET mode */ + SJA_PeliCAN_AC_LEN = 4, /* 4 bytes */ + SJA_CDR = 0x1f /* Clock Divider */ +}; + + +/* BasicCAN mode */ +enum SJA1000_BasicCAN_regs { + SJA_BCAN_CTR = 0x00, /* Control register */ + SJA_BCAN_CMR = 0x01, /* Command register */ + SJA_BCAN_SR = 0x02, /* Status register */ + SJA_BCAN_IR = 0x03 /* Interrupt register */ +}; + +void can_sja_hardware_reset(CanSJA1000State *s); + +void can_sja_mem_write(CanSJA1000State *s, hwaddr addr, uint64_t val, + unsigned size); + +uint64_t can_sja_mem_read(CanSJA1000State *s, hwaddr addr, unsigned size); + +int can_sja_connect_to_bus(CanSJA1000State *s, CanBusState *bus); + +void can_sja_disconnect(CanSJA1000State *s); + +int can_sja_init(CanSJA1000State *s, qemu_irq irq); + +bool can_sja_can_receive(CanBusClientState *client); + +ssize_t can_sja_receive(CanBusClientState *client, + const qemu_can_frame *frames, size_t frames_cnt); + +extern const VMStateDescription vmstate_can_sja; + +#endif |