1 files changed, 471 insertions, 0 deletions
diff --git a/hw/timer/sse-timer.c b/hw/timer/sse-timer.c
new file mode 100644
index 000000000..f959cb9d6
--- /dev/null
+++ b/hw/timer/sse-timer.c
@@ -0,0 +1,471 @@
+/*
+ * Arm SSE Subsystem System Timer
+ *
+ * Copyright (c) 2020 Linaro Limited
+ * Written by Peter Maydell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 or
+ * (at your option) any later version.
+ */
+
+/*
+ * This is a model of the "System timer" which is documented in
+ * the Arm SSE-123 Example Subsystem Technical Reference Manual:
+ * https://developer.arm.com/documentation/101370/latest/
+ *
+ * The timer is based around a simple 64-bit incrementing counter
+ * (readable from CNTPCT_HI/LO). The timer fires when
+ *  Counter - CompareValue >= 0.
+ * The CompareValue is guest-writable, via CNTP_CVAL_HI/LO.
+ * CNTP_TVAL is an alternative view of the CompareValue defined by
+ *  TimerValue = CompareValue[31:0] - Counter[31:0]
+ * which can be both read and written.
+ * This part is similar to the generic timer in an Arm A-class CPU.
+ *
+ * The timer also has a separate auto-increment timer. When this
+ * timer is enabled, then the AutoIncrValue is set to:
+ *  AutoIncrValue = Reload + Counter
+ * and this timer fires when
+ *  Counter - AutoIncrValue >= 0
+ * at which point, an interrupt is generated and the new AutoIncrValue
+ * is calculated.
+ * When the auto-increment timer is enabled, interrupt generation
+ * via the compare/timervalue registers is disabled.
+ */
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "qemu/timer.h"
+#include "qapi/error.h"
+#include "trace.h"
+#include "hw/timer/sse-timer.h"
+#include "hw/timer/sse-counter.h"
+#include "hw/sysbus.h"
+#include "hw/irq.h"
+#include "hw/registerfields.h"
+#include "hw/clock.h"
+#include "hw/qdev-clock.h"
+#include "hw/qdev-properties.h"
+#include "migration/vmstate.h"
+
+REG32(CNTPCT_LO, 0x0)
+REG32(CNTPCT_HI, 0x4)
+REG32(CNTFRQ, 0x10)
+REG32(CNTP_CVAL_LO, 0x20)
+REG32(CNTP_CVAL_HI, 0x24)
+REG32(CNTP_TVAL, 0x28)
+REG32(CNTP_CTL, 0x2c)
+    FIELD(CNTP_CTL, ENABLE, 0, 1)
+    FIELD(CNTP_CTL, IMASK, 1, 1)
+    FIELD(CNTP_CTL, ISTATUS, 2, 1)
+REG32(CNTP_AIVAL_LO, 0x40)
+REG32(CNTP_AIVAL_HI, 0x44)
+REG32(CNTP_AIVAL_RELOAD, 0x48)
+REG32(CNTP_AIVAL_CTL, 0x4c)
+    FIELD(CNTP_AIVAL_CTL, EN, 0, 1)
+    FIELD(CNTP_AIVAL_CTL, CLR, 1, 1)
+REG32(CNTP_CFG, 0x50)
+    FIELD(CNTP_CFG, AIVAL, 0, 4)
+#define R_CNTP_CFG_AIVAL_IMPLEMENTED 1
+REG32(PID4, 0xFD0)
+REG32(PID5, 0xFD4)
+REG32(PID6, 0xFD8)
+REG32(PID7, 0xFDC)
+REG32(PID0, 0xFE0)
+REG32(PID1, 0xFE4)
+REG32(PID2, 0xFE8)
+REG32(PID3, 0xFEC)
+REG32(CID0, 0xFF0)
+REG32(CID1, 0xFF4)
+REG32(CID2, 0xFF8)
+REG32(CID3, 0xFFC)
+
+/* PID/CID values */
+static const int timer_id[] = {
+    0x04, 0x00, 0x00, 0x00, /* PID4..PID7 */
+    0xb7, 0xb0, 0x0b, 0x00, /* PID0..PID3 */
+    0x0d, 0xf0, 0x05, 0xb1, /* CID0..CID3 */
+};
+
+static bool sse_is_autoinc(SSETimer *s)
+{
+    return (s->cntp_aival_ctl & R_CNTP_AIVAL_CTL_EN_MASK) != 0;
+}
+
+static bool sse_enabled(SSETimer *s)
+{
+    return (s->cntp_ctl & R_CNTP_CTL_ENABLE_MASK) != 0;
+}
+
+static uint64_t sse_cntpct(SSETimer *s)
+{
+    /* Return the CNTPCT value for the current time */
+    return sse_counter_for_timestamp(s->counter,
+                                     qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL));
+}
+
+static bool sse_timer_status(SSETimer *s)
+{
+    /*
+     * Return true if timer condition is met. This is used for both
+     * the CNTP_CTL.ISTATUS bit and for whether (unless masked) we
+     * assert our IRQ.
+     * The documentation is unclear about the behaviour of ISTATUS when
+     * in autoincrement mode; we assume that it follows CNTP_AIVAL_CTL.CLR
+     * (ie whether the autoincrement timer is asserting the interrupt).
+     */
+    if (!sse_enabled(s)) {
+        return false;
+    }
+
+    if (sse_is_autoinc(s)) {
+        return s->cntp_aival_ctl & R_CNTP_AIVAL_CTL_CLR_MASK;
+    } else {
+        return sse_cntpct(s) >= s->cntp_cval;
+    }
+}
+
+static void sse_update_irq(SSETimer *s)
+{
+    bool irqstate = (!(s->cntp_ctl & R_CNTP_CTL_IMASK_MASK) &&
+                     sse_timer_status(s));
+
+    qemu_set_irq(s->irq, irqstate);
+}
+
+static void sse_set_timer(SSETimer *s, uint64_t nexttick)
+{
+    /* Set the timer to expire at nexttick */
+    uint64_t expiry = sse_counter_tick_to_time(s->counter, nexttick);
+
+    if (expiry <= INT64_MAX) {
+        timer_mod_ns(&s->timer, expiry);
+    } else {
+        /*
+         * nexttick is so far in the future that it would overflow the
+         * signed 64-bit range of a QEMUTimer. Since timer_mod_ns()
+         * expiry times are absolute, not relative, we are never going
+         * to be able to set the timer to this value, so we must just
+         * assume that guest execution can never run so long that it
+         * reaches the theoretical point when the timer fires.
+         * This is also the code path for "counter is not running",
+         * which is signalled by expiry == UINT64_MAX.
+         */
+        timer_del(&s->timer);
+    }
+}
+
+static void sse_recalc_timer(SSETimer *s)
+{
+    /* Recalculate the normal timer */
+    uint64_t count, nexttick;
+
+    if (sse_is_autoinc(s)) {
+        return;
+    }
+
+    if (!sse_enabled(s)) {
+        timer_del(&s->timer);
+        return;
+    }
+
+    count = sse_cntpct(s);
+
+    if (count >= s->cntp_cval) {
+        /*
+         * Timer condition already met. In theory we have a transition when
+         * the count rolls back over to 0, but that is so far in the future
+         * that it is not representable as a timer_mod() expiry, so in
+         * fact sse_set_timer() will always just delete the timer.
+         */
+        nexttick = UINT64_MAX;
+    } else {
+        /* Next transition is when count hits cval */
+        nexttick = s->cntp_cval;
+    }
+    sse_set_timer(s, nexttick);
+    sse_update_irq(s);
+}
+
+static void sse_autoinc(SSETimer *s)
+{
+    /* Auto-increment the AIVAL, and set the timer accordingly */
+    s->cntp_aival = sse_cntpct(s) + s->cntp_aival_reload;
+    sse_set_timer(s, s->cntp_aival);
+}
+
+static void sse_timer_cb(void *opaque)
+{
+    SSETimer *s = SSE_TIMER(opaque);
+
+    if (sse_is_autoinc(s)) {
+        uint64_t count = sse_cntpct(s);
+
+        if (count >= s->cntp_aival) {
+            /* Timer condition met, set CLR and do another autoinc */
+            s->cntp_aival_ctl |= R_CNTP_AIVAL_CTL_CLR_MASK;
+            s->cntp_aival = count + s->cntp_aival_reload;
+        }
+        sse_set_timer(s, s->cntp_aival);
+        sse_update_irq(s);
+    } else {
+        sse_recalc_timer(s);
+    }
+}
+
+static uint64_t sse_timer_read(void *opaque, hwaddr offset, unsigned size)
+{
+    SSETimer *s = SSE_TIMER(opaque);
+    uint64_t r;
+
+    switch (offset) {
+    case A_CNTPCT_LO:
+        r = extract64(sse_cntpct(s), 0, 32);
+        break;
+    case A_CNTPCT_HI:
+        r = extract64(sse_cntpct(s), 32, 32);
+        break;
+    case A_CNTFRQ:
+        r = s->cntfrq;
+        break;
+    case A_CNTP_CVAL_LO:
+        r = extract64(s->cntp_cval, 0, 32);
+        break;
+    case A_CNTP_CVAL_HI:
+        r = extract64(s->cntp_cval, 32, 32);
+        break;
+    case A_CNTP_TVAL:
+        r = extract64(s->cntp_cval - sse_cntpct(s), 0, 32);
+        break;
+    case A_CNTP_CTL:
+        r = s->cntp_ctl;
+        if (sse_timer_status(s)) {
+            r |= R_CNTP_CTL_ISTATUS_MASK;
+        }
+        break;
+    case A_CNTP_AIVAL_LO:
+        r = extract64(s->cntp_aival, 0, 32);
+        break;
+    case A_CNTP_AIVAL_HI:
+        r = extract64(s->cntp_aival, 32, 32);
+        break;
+    case A_CNTP_AIVAL_RELOAD:
+        r = s->cntp_aival_reload;
+        break;
+    case A_CNTP_AIVAL_CTL:
+        /*
+         * All the bits of AIVAL_CTL are documented as WO, but this is probably
+         * a documentation error. We implement them as readable.
+         */
+        r = s->cntp_aival_ctl;
+        break;
+    case A_CNTP_CFG:
+        r = R_CNTP_CFG_AIVAL_IMPLEMENTED << R_CNTP_CFG_AIVAL_SHIFT;
+        break;
+    case A_PID4 ... A_CID3:
+        r = timer_id[(offset - A_PID4) / 4];
+        break;
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "SSE System Timer read: bad offset 0x%x",
+                      (unsigned) offset);
+        r = 0;
+        break;
+    }
+
+    trace_sse_timer_read(offset, r, size);
+    return r;
+}
+
+static void sse_timer_write(void *opaque, hwaddr offset, uint64_t value,
+                            unsigned size)
+{
+    SSETimer *s = SSE_TIMER(opaque);
+
+    trace_sse_timer_write(offset, value, size);
+
+    switch (offset) {
+    case A_CNTFRQ:
+        s->cntfrq = value;
+        break;
+    case A_CNTP_CVAL_LO:
+        s->cntp_cval = deposit64(s->cntp_cval, 0, 32, value);
+        sse_recalc_timer(s);
+        break;
+    case A_CNTP_CVAL_HI:
+        s->cntp_cval = deposit64(s->cntp_cval, 32, 32, value);
+        sse_recalc_timer(s);
+        break;
+    case A_CNTP_TVAL:
+        s->cntp_cval = sse_cntpct(s) + sextract64(value, 0, 32);
+        sse_recalc_timer(s);
+        break;
+    case A_CNTP_CTL:
+    {
+        uint32_t old_ctl = s->cntp_ctl;
+        value &= R_CNTP_CTL_ENABLE_MASK | R_CNTP_CTL_IMASK_MASK;
+        s->cntp_ctl = value;
+        if ((old_ctl ^ s->cntp_ctl) & R_CNTP_CTL_ENABLE_MASK) {
+            if (sse_enabled(s)) {
+                if (sse_is_autoinc(s)) {
+                    sse_autoinc(s);
+                } else {
+                    sse_recalc_timer(s);
+                }
+            }
+        }
+        sse_update_irq(s);
+        break;
+    }
+    case A_CNTP_AIVAL_RELOAD:
+        s->cntp_aival_reload = value;
+        break;
+    case A_CNTP_AIVAL_CTL:
+    {
+        uint32_t old_ctl = s->cntp_aival_ctl;
+
+        /* EN bit is writeable; CLR bit is write-0-to-clear, write-1-ignored */
+        s->cntp_aival_ctl &= ~R_CNTP_AIVAL_CTL_EN_MASK;
+        s->cntp_aival_ctl |= value & R_CNTP_AIVAL_CTL_EN_MASK;
+        if (!(value & R_CNTP_AIVAL_CTL_CLR_MASK)) {
+            s->cntp_aival_ctl &= ~R_CNTP_AIVAL_CTL_CLR_MASK;
+        }
+        if ((old_ctl ^ s->cntp_aival_ctl) & R_CNTP_AIVAL_CTL_EN_MASK) {
+            /* Auto-increment toggled on/off */
+            if (sse_enabled(s)) {
+                if (sse_is_autoinc(s)) {
+                    sse_autoinc(s);
+                } else {
+                    sse_recalc_timer(s);
+                }
+            }
+        }
+        sse_update_irq(s);
+        break;
+    }
+    case A_CNTPCT_LO:
+    case A_CNTPCT_HI:
+    case A_CNTP_CFG:
+    case A_CNTP_AIVAL_LO:
+    case A_CNTP_AIVAL_HI:
+    case A_PID4 ... A_CID3:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "SSE System Timer write: write to RO offset 0x%x\n",
+                      (unsigned)offset);
+        break;
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "SSE System Timer write: bad offset 0x%x\n",
+                      (unsigned)offset);
+        break;
+    }
+}
+
+static const MemoryRegionOps sse_timer_ops = {
+    .read = sse_timer_read,
+    .write = sse_timer_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid.min_access_size = 4,
+    .valid.max_access_size = 4,
+};
+
+static void sse_timer_reset(DeviceState *dev)
+{
+    SSETimer *s = SSE_TIMER(dev);
+
+    trace_sse_timer_reset();
+
+    timer_del(&s->timer);
+    s->cntfrq = 0;
+    s->cntp_ctl = 0;
+    s->cntp_cval = 0;
+    s->cntp_aival = 0;
+    s->cntp_aival_ctl = 0;
+    s->cntp_aival_reload = 0;
+}
+
+static void sse_timer_counter_callback(Notifier *notifier, void *data)
+{
+    SSETimer *s = container_of(notifier, SSETimer, counter_notifier);
+
+    /* System counter told us we need to recalculate */
+    if (sse_enabled(s)) {
+        if (sse_is_autoinc(s)) {
+            sse_set_timer(s, s->cntp_aival);
+        } else {
+            sse_recalc_timer(s);
+        }
+    }
+}
+
+static void sse_timer_init(Object *obj)
+{
+    SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
+    SSETimer *s = SSE_TIMER(obj);
+
+    memory_region_init_io(&s->iomem, obj, &sse_timer_ops,
+                          s, "sse-timer", 0x1000);
+    sysbus_init_mmio(sbd, &s->iomem);
+    sysbus_init_irq(sbd, &s->irq);
+}
+
+static void sse_timer_realize(DeviceState *dev, Error **errp)
+{
+    SSETimer *s = SSE_TIMER(dev);
+
+    if (!s->counter) {
+        error_setg(errp, "counter property was not set");
+        return;
+    }
+
+    s->counter_notifier.notify = sse_timer_counter_callback;
+    sse_counter_register_consumer(s->counter, &s->counter_notifier);
+
+    timer_init_ns(&s->timer, QEMU_CLOCK_VIRTUAL, sse_timer_cb, s);
+}
+
+static const VMStateDescription sse_timer_vmstate = {
+    .name = "sse-timer",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_TIMER(timer, SSETimer),
+        VMSTATE_UINT32(cntfrq, SSETimer),
+        VMSTATE_UINT32(cntp_ctl, SSETimer),
+        VMSTATE_UINT64(cntp_cval, SSETimer),
+        VMSTATE_UINT64(cntp_aival, SSETimer),
+        VMSTATE_UINT32(cntp_aival_ctl, SSETimer),
+        VMSTATE_UINT32(cntp_aival_reload, SSETimer),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static Property sse_timer_properties[] = {
+    DEFINE_PROP_LINK("counter", SSETimer, counter, TYPE_SSE_COUNTER, SSECounter *),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
+static void sse_timer_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->realize = sse_timer_realize;
+    dc->vmsd = &sse_timer_vmstate;
+    dc->reset = sse_timer_reset;
+    device_class_set_props(dc, sse_timer_properties);
+}
+
+static const TypeInfo sse_timer_info = {
+    .name = TYPE_SSE_TIMER,
+    .parent = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(SSETimer),
+    .instance_init = sse_timer_init,
+    .class_init = sse_timer_class_init,
+};
+
+static void sse_timer_register_types(void)
+{
+    type_register_static(&sse_timer_info);
+}
+
+type_init(sse_timer_register_types);