diff options
Diffstat (limited to 'include/standard-headers/linux/input.h')
| -rw-r--r-- | include/standard-headers/linux/input.h | 511 |
1 files changed, 511 insertions, 0 deletions
diff --git a/include/standard-headers/linux/input.h b/include/standard-headers/linux/input.h new file mode 100644 index 000000000..7822c2417 --- /dev/null +++ b/include/standard-headers/linux/input.h @@ -0,0 +1,511 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Copyright (c) 1999-2002 Vojtech Pavlik + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef _INPUT_H +#define _INPUT_H + + +#include <sys/time.h> +#include <sys/types.h> +#include "standard-headers/linux/types.h" + +#include "standard-headers/linux/input-event-codes.h" + +/* + * The event structure itself + * Note that __USE_TIME_BITS64 is defined by libc based on + * application's request to use 64 bit time_t. + */ + +struct input_event { +#if (HOST_LONG_BITS != 32 || !defined(__USE_TIME_BITS64)) && !defined(__KERNEL__) + struct timeval time; +#define input_event_sec time.tv_sec +#define input_event_usec time.tv_usec +#else + unsigned long __sec; +#if defined(__sparc__) && defined(__arch64__) + unsigned int __usec; + unsigned int __pad; +#else + unsigned long __usec; +#endif +#define input_event_sec __sec +#define input_event_usec __usec +#endif + uint16_t type; + uint16_t code; + int32_t value; +}; + +/* + * Protocol version. + */ + +#define EV_VERSION 0x010001 + +/* + * IOCTLs (0x00 - 0x7f) + */ + +struct input_id { + uint16_t bustype; + uint16_t vendor; + uint16_t product; + uint16_t version; +}; + +/** + * struct input_absinfo - used by EVIOCGABS/EVIOCSABS ioctls + * @value: latest reported value for the axis. + * @minimum: specifies minimum value for the axis. + * @maximum: specifies maximum value for the axis. + * @fuzz: specifies fuzz value that is used to filter noise from + * the event stream. + * @flat: values that are within this value will be discarded by + * joydev interface and reported as 0 instead. + * @resolution: specifies resolution for the values reported for + * the axis. + * + * Note that input core does not clamp reported values to the + * [minimum, maximum] limits, such task is left to userspace. + * + * The default resolution for main axes (ABS_X, ABS_Y, ABS_Z) + * is reported in units per millimeter (units/mm), resolution + * for rotational axes (ABS_RX, ABS_RY, ABS_RZ) is reported + * in units per radian. + * When INPUT_PROP_ACCELEROMETER is set the resolution changes. + * The main axes (ABS_X, ABS_Y, ABS_Z) are then reported in + * units per g (units/g) and in units per degree per second + * (units/deg/s) for rotational axes (ABS_RX, ABS_RY, ABS_RZ). + */ +struct input_absinfo { + int32_t value; + int32_t minimum; + int32_t maximum; + int32_t fuzz; + int32_t flat; + int32_t resolution; +}; + +/** + * struct input_keymap_entry - used by EVIOCGKEYCODE/EVIOCSKEYCODE ioctls + * @scancode: scancode represented in machine-endian form. + * @len: length of the scancode that resides in @scancode buffer. + * @index: index in the keymap, may be used instead of scancode + * @flags: allows to specify how kernel should handle the request. For + * example, setting INPUT_KEYMAP_BY_INDEX flag indicates that kernel + * should perform lookup in keymap by @index instead of @scancode + * @keycode: key code assigned to this scancode + * + * The structure is used to retrieve and modify keymap data. Users have + * option of performing lookup either by @scancode itself or by @index + * in keymap entry. EVIOCGKEYCODE will also return scancode or index + * (depending on which element was used to perform lookup). + */ +struct input_keymap_entry { +#define INPUT_KEYMAP_BY_INDEX (1 << 0) + uint8_t flags; + uint8_t len; + uint16_t index; + uint32_t keycode; + uint8_t scancode[32]; +}; + +struct input_mask { + uint32_t type; + uint32_t codes_size; + uint64_t codes_ptr; +}; + +#define EVIOCGVERSION _IOR('E', 0x01, int) /* get driver version */ +#define EVIOCGID _IOR('E', 0x02, struct input_id) /* get device ID */ +#define EVIOCGREP _IOR('E', 0x03, unsigned int[2]) /* get repeat settings */ +#define EVIOCSREP _IOW('E', 0x03, unsigned int[2]) /* set repeat settings */ + +#define EVIOCGKEYCODE _IOR('E', 0x04, unsigned int[2]) /* get keycode */ +#define EVIOCGKEYCODE_V2 _IOR('E', 0x04, struct input_keymap_entry) +#define EVIOCSKEYCODE _IOW('E', 0x04, unsigned int[2]) /* set keycode */ +#define EVIOCSKEYCODE_V2 _IOW('E', 0x04, struct input_keymap_entry) + +#define EVIOCGNAME(len) _IOC(_IOC_READ, 'E', 0x06, len) /* get device name */ +#define EVIOCGPHYS(len) _IOC(_IOC_READ, 'E', 0x07, len) /* get physical location */ +#define EVIOCGUNIQ(len) _IOC(_IOC_READ, 'E', 0x08, len) /* get unique identifier */ +#define EVIOCGPROP(len) _IOC(_IOC_READ, 'E', 0x09, len) /* get device properties */ + +/** + * EVIOCGMTSLOTS(len) - get MT slot values + * @len: size of the data buffer in bytes + * + * The ioctl buffer argument should be binary equivalent to + * + * struct input_mt_request_layout { + * uint32_t code; + * int32_t values[num_slots]; + * }; + * + * where num_slots is the (arbitrary) number of MT slots to extract. + * + * The ioctl size argument (len) is the size of the buffer, which + * should satisfy len = (num_slots + 1) * sizeof(int32_t). If len is + * too small to fit all available slots, the first num_slots are + * returned. + * + * Before the call, code is set to the wanted ABS_MT event type. On + * return, values[] is filled with the slot values for the specified + * ABS_MT code. + * + * If the request code is not an ABS_MT value, -EINVAL is returned. + */ +#define EVIOCGMTSLOTS(len) _IOC(_IOC_READ, 'E', 0x0a, len) + +#define EVIOCGKEY(len) _IOC(_IOC_READ, 'E', 0x18, len) /* get global key state */ +#define EVIOCGLED(len) _IOC(_IOC_READ, 'E', 0x19, len) /* get all LEDs */ +#define EVIOCGSND(len) _IOC(_IOC_READ, 'E', 0x1a, len) /* get all sounds status */ +#define EVIOCGSW(len) _IOC(_IOC_READ, 'E', 0x1b, len) /* get all switch states */ + +#define EVIOCGBIT(ev,len) _IOC(_IOC_READ, 'E', 0x20 + (ev), len) /* get event bits */ +#define EVIOCGABS(abs) _IOR('E', 0x40 + (abs), struct input_absinfo) /* get abs value/limits */ +#define EVIOCSABS(abs) _IOW('E', 0xc0 + (abs), struct input_absinfo) /* set abs value/limits */ + +#define EVIOCSFF _IOW('E', 0x80, struct ff_effect) /* send a force effect to a force feedback device */ +#define EVIOCRMFF _IOW('E', 0x81, int) /* Erase a force effect */ +#define EVIOCGEFFECTS _IOR('E', 0x84, int) /* Report number of effects playable at the same time */ + +#define EVIOCGRAB _IOW('E', 0x90, int) /* Grab/Release device */ +#define EVIOCREVOKE _IOW('E', 0x91, int) /* Revoke device access */ + +/** + * EVIOCGMASK - Retrieve current event mask + * + * This ioctl allows user to retrieve the current event mask for specific + * event type. The argument must be of type "struct input_mask" and + * specifies the event type to query, the address of the receive buffer and + * the size of the receive buffer. + * + * The event mask is a per-client mask that specifies which events are + * forwarded to the client. Each event code is represented by a single bit + * in the event mask. If the bit is set, the event is passed to the client + * normally. Otherwise, the event is filtered and will never be queued on + * the client's receive buffer. + * + * Event masks do not affect global state of the input device. They only + * affect the file descriptor they are applied to. + * + * The default event mask for a client has all bits set, i.e. all events + * are forwarded to the client. If the kernel is queried for an unknown + * event type or if the receive buffer is larger than the number of + * event codes known to the kernel, the kernel returns all zeroes for those + * codes. + * + * At maximum, codes_size bytes are copied. + * + * This ioctl may fail with ENODEV in case the file is revoked, EFAULT + * if the receive-buffer points to invalid memory, or EINVAL if the kernel + * does not implement the ioctl. + */ +#define EVIOCGMASK _IOR('E', 0x92, struct input_mask) /* Get event-masks */ + +/** + * EVIOCSMASK - Set event mask + * + * This ioctl is the counterpart to EVIOCGMASK. Instead of receiving the + * current event mask, this changes the client's event mask for a specific + * type. See EVIOCGMASK for a description of event-masks and the + * argument-type. + * + * This ioctl provides full forward compatibility. If the passed event type + * is unknown to the kernel, or if the number of event codes specified in + * the mask is bigger than what is known to the kernel, the ioctl is still + * accepted and applied. However, any unknown codes are left untouched and + * stay cleared. That means, the kernel always filters unknown codes + * regardless of what the client requests. If the new mask doesn't cover + * all known event-codes, all remaining codes are automatically cleared and + * thus filtered. + * + * This ioctl may fail with ENODEV in case the file is revoked. EFAULT is + * returned if the receive-buffer points to invalid memory. EINVAL is returned + * if the kernel does not implement the ioctl. + */ +#define EVIOCSMASK _IOW('E', 0x93, struct input_mask) /* Set event-masks */ + +#define EVIOCSCLOCKID _IOW('E', 0xa0, int) /* Set clockid to be used for timestamps */ + +/* + * IDs. + */ + +#define ID_BUS 0 +#define ID_VENDOR 1 +#define ID_PRODUCT 2 +#define ID_VERSION 3 + +#define BUS_PCI 0x01 +#define BUS_ISAPNP 0x02 +#define BUS_USB 0x03 +#define BUS_HIL 0x04 +#define BUS_BLUETOOTH 0x05 +#define BUS_VIRTUAL 0x06 + +#define BUS_ISA 0x10 +#define BUS_I8042 0x11 +#define BUS_XTKBD 0x12 +#define BUS_RS232 0x13 +#define BUS_GAMEPORT 0x14 +#define BUS_PARPORT 0x15 +#define BUS_AMIGA 0x16 +#define BUS_ADB 0x17 +#define BUS_I2C 0x18 +#define BUS_HOST 0x19 +#define BUS_GSC 0x1A +#define BUS_ATARI 0x1B +#define BUS_SPI 0x1C +#define BUS_RMI 0x1D +#define BUS_CEC 0x1E +#define BUS_INTEL_ISHTP 0x1F + +/* + * MT_TOOL types + */ +#define MT_TOOL_FINGER 0x00 +#define MT_TOOL_PEN 0x01 +#define MT_TOOL_PALM 0x02 +#define MT_TOOL_DIAL 0x0a +#define MT_TOOL_MAX 0x0f + +/* + * Values describing the status of a force-feedback effect + */ +#define FF_STATUS_STOPPED 0x00 +#define FF_STATUS_PLAYING 0x01 +#define FF_STATUS_MAX 0x01 + +/* + * Structures used in ioctls to upload effects to a device + * They are pieces of a bigger structure (called ff_effect) + */ + +/* + * All duration values are expressed in ms. Values above 32767 ms (0x7fff) + * should not be used and have unspecified results. + */ + +/** + * struct ff_replay - defines scheduling of the force-feedback effect + * @length: duration of the effect + * @delay: delay before effect should start playing + */ +struct ff_replay { + uint16_t length; + uint16_t delay; +}; + +/** + * struct ff_trigger - defines what triggers the force-feedback effect + * @button: number of the button triggering the effect + * @interval: controls how soon the effect can be re-triggered + */ +struct ff_trigger { + uint16_t button; + uint16_t interval; +}; + +/** + * struct ff_envelope - generic force-feedback effect envelope + * @attack_length: duration of the attack (ms) + * @attack_level: level at the beginning of the attack + * @fade_length: duration of fade (ms) + * @fade_level: level at the end of fade + * + * The @attack_level and @fade_level are absolute values; when applying + * envelope force-feedback core will convert to positive/negative + * value based on polarity of the default level of the effect. + * Valid range for the attack and fade levels is 0x0000 - 0x7fff + */ +struct ff_envelope { + uint16_t attack_length; + uint16_t attack_level; + uint16_t fade_length; + uint16_t fade_level; +}; + +/** + * struct ff_constant_effect - defines parameters of a constant force-feedback effect + * @level: strength of the effect; may be negative + * @envelope: envelope data + */ +struct ff_constant_effect { + int16_t level; + struct ff_envelope envelope; +}; + +/** + * struct ff_ramp_effect - defines parameters of a ramp force-feedback effect + * @start_level: beginning strength of the effect; may be negative + * @end_level: final strength of the effect; may be negative + * @envelope: envelope data + */ +struct ff_ramp_effect { + int16_t start_level; + int16_t end_level; + struct ff_envelope envelope; +}; + +/** + * struct ff_condition_effect - defines a spring or friction force-feedback effect + * @right_saturation: maximum level when joystick moved all way to the right + * @left_saturation: same for the left side + * @right_coeff: controls how fast the force grows when the joystick moves + * to the right + * @left_coeff: same for the left side + * @deadband: size of the dead zone, where no force is produced + * @center: position of the dead zone + */ +struct ff_condition_effect { + uint16_t right_saturation; + uint16_t left_saturation; + + int16_t right_coeff; + int16_t left_coeff; + + uint16_t deadband; + int16_t center; +}; + +/** + * struct ff_periodic_effect - defines parameters of a periodic force-feedback effect + * @waveform: kind of the effect (wave) + * @period: period of the wave (ms) + * @magnitude: peak value + * @offset: mean value of the wave (roughly) + * @phase: 'horizontal' shift + * @envelope: envelope data + * @custom_len: number of samples (FF_CUSTOM only) + * @custom_data: buffer of samples (FF_CUSTOM only) + * + * Known waveforms - FF_SQUARE, FF_TRIANGLE, FF_SINE, FF_SAW_UP, + * FF_SAW_DOWN, FF_CUSTOM. The exact syntax FF_CUSTOM is undefined + * for the time being as no driver supports it yet. + * + * Note: the data pointed by custom_data is copied by the driver. + * You can therefore dispose of the memory after the upload/update. + */ +struct ff_periodic_effect { + uint16_t waveform; + uint16_t period; + int16_t magnitude; + int16_t offset; + uint16_t phase; + + struct ff_envelope envelope; + + uint32_t custom_len; + int16_t *custom_data; +}; + +/** + * struct ff_rumble_effect - defines parameters of a periodic force-feedback effect + * @strong_magnitude: magnitude of the heavy motor + * @weak_magnitude: magnitude of the light one + * + * Some rumble pads have two motors of different weight. Strong_magnitude + * represents the magnitude of the vibration generated by the heavy one. + */ +struct ff_rumble_effect { + uint16_t strong_magnitude; + uint16_t weak_magnitude; +}; + +/** + * struct ff_effect - defines force feedback effect + * @type: type of the effect (FF_CONSTANT, FF_PERIODIC, FF_RAMP, FF_SPRING, + * FF_FRICTION, FF_DAMPER, FF_RUMBLE, FF_INERTIA, or FF_CUSTOM) + * @id: an unique id assigned to an effect + * @direction: direction of the effect + * @trigger: trigger conditions (struct ff_trigger) + * @replay: scheduling of the effect (struct ff_replay) + * @u: effect-specific structure (one of ff_constant_effect, ff_ramp_effect, + * ff_periodic_effect, ff_condition_effect, ff_rumble_effect) further + * defining effect parameters + * + * This structure is sent through ioctl from the application to the driver. + * To create a new effect application should set its @id to -1; the kernel + * will return assigned @id which can later be used to update or delete + * this effect. + * + * Direction of the effect is encoded as follows: + * 0 deg -> 0x0000 (down) + * 90 deg -> 0x4000 (left) + * 180 deg -> 0x8000 (up) + * 270 deg -> 0xC000 (right) + */ +struct ff_effect { + uint16_t type; + int16_t id; + uint16_t direction; + struct ff_trigger trigger; + struct ff_replay replay; + + union { + struct ff_constant_effect constant; + struct ff_ramp_effect ramp; + struct ff_periodic_effect periodic; + struct ff_condition_effect condition[2]; /* One for each axis */ + struct ff_rumble_effect rumble; + } u; +}; + +/* + * Force feedback effect types + */ + +#define FF_RUMBLE 0x50 +#define FF_PERIODIC 0x51 +#define FF_CONSTANT 0x52 +#define FF_SPRING 0x53 +#define FF_FRICTION 0x54 +#define FF_DAMPER 0x55 +#define FF_INERTIA 0x56 +#define FF_RAMP 0x57 + +#define FF_EFFECT_MIN FF_RUMBLE +#define FF_EFFECT_MAX FF_RAMP + +/* + * Force feedback periodic effect types + */ + +#define FF_SQUARE 0x58 +#define FF_TRIANGLE 0x59 +#define FF_SINE 0x5a +#define FF_SAW_UP 0x5b +#define FF_SAW_DOWN 0x5c +#define FF_CUSTOM 0x5d + +#define FF_WAVEFORM_MIN FF_SQUARE +#define FF_WAVEFORM_MAX FF_CUSTOM + +/* + * Set ff device properties + */ + +#define FF_GAIN 0x60 +#define FF_AUTOCENTER 0x61 + +/* + * ff->playback(effect_id = FF_GAIN) is the first effect_id to + * cause a collision with another ff method, in this case ff->set_gain(). + * Therefore the greatest safe value for effect_id is FF_GAIN - 1, + * and thus the total number of effects should never exceed FF_GAIN. + */ +#define FF_MAX_EFFECTS FF_GAIN + +#define FF_MAX 0x7f +#define FF_CNT (FF_MAX+1) + +#endif /* _INPUT_H */ |