1 files changed, 44 insertions, 0 deletions
diff --git a/roms/skiboot/doc/opal-api/opal-pci-set-p2p-157.rst b/roms/skiboot/doc/opal-api/opal-pci-set-p2p-157.rst
new file mode 100644
index 000000000..d7be11475
--- /dev/null
+++ b/roms/skiboot/doc/opal-api/opal-pci-set-p2p-157.rst
@@ -0,0 +1,44 @@
+.. _OPAL_PCI_SET_P2P:
+
+OPAL_PCI_SET_P2P
+================
+
+.. code-block:: c
+
+   #define OPAL_PCI_SET_P2P			157
+
+   int64_t opal_pci_set_p2p(uint64_t phbid_init, uint64_t phbid_target,
+				uint64_t desc, uint16_t pe_number);
+
+   /* PCI p2p descriptor */
+   #define OPAL_PCI_P2P_ENABLE		0x1
+   #define OPAL_PCI_P2P_LOAD		0x2
+   #define OPAL_PCI_P2P_STORE		0x4
+
+The host calls this function to enable PCI peer-to-peer on the PHBs.
+
+Parameters
+----------
+
+``phbid_init``
+  is the value from the PHB node ibm,opal-phbid property for the device initiating the p2p operation
+
+``phbid_target``
+  is the value from the PHB node ibm,opal-phbid property for the device targeted by the p2p operation
+
+``desc``
+  tells whether the p2p operation is a store (OPAL_PCI_P2P_STORE) or load (OPAL_PCI_P2P_LOAD). Can be both.
+  OPAL_PCI_P2P_ENABLE enables/disables the setting
+
+``pe_number``
+  PE number for the initiating device
+
+Return Values
+-------------
+
+:ref:`OPAL_SUCCESS`
+  Configuration was successful
+:ref:`OPAL_PARAMETER`
+  Invalid PHB or mode parameter
+:ref:`OPAL_UNSUPPORTED`
+  Not supported by hardware