aboutsummaryrefslogtreecommitdiffstats
path: root/roms/skiboot/external/pflash/test/results/05-bad-numbers.out
diff options
context:
space:
mode:
Diffstat (limited to 'roms/skiboot/external/pflash/test/results/05-bad-numbers.out')
-rw-r--r--roms/skiboot/external/pflash/test/results/05-bad-numbers.out224
1 files changed, 224 insertions, 0 deletions
diff --git a/roms/skiboot/external/pflash/test/results/05-bad-numbers.out b/roms/skiboot/external/pflash/test/results/05-bad-numbers.out
new file mode 100644
index 000000000..2a76c28c0
--- /dev/null
+++ b/roms/skiboot/external/pflash/test/results/05-bad-numbers.out
@@ -0,0 +1,224 @@
+Open-Power Flash tool VERSION
+Usage: ./pflash [options] commands...
+
+ Options:
+ -a address, --address=address
+ Specify the start address for erasing, reading
+ or flashing
+
+ -s size, --size=size
+ Specify the size in bytes for erasing, reading
+ or flashing
+
+ -P part_name, --partition=part_name
+ Specify the partition whose content is to be erased
+ programmed or read. This is an alternative to -a and -s
+ if both -P and -s are specified, the smallest of the
+ two will be used
+
+ -f, --force
+ Don't ask for confirmation before erasing or flashing
+
+ -d, --dummy
+ Don't write to flash
+
+ --direct
+ Bypass all safety provided to you by the kernel driver
+ and use the flash driver built into pflash.
+ If you have mtd devices and you use this command, the
+ system may become unstable.
+ If you are reading this sentence then this flag is not
+ what you want! Using this feature without knowing
+ what it does can and likely will result in a bricked
+ machine
+
+ -b, --bmc
+ Target BMC flash instead of host flash.
+ Note: This carries a high chance of bricking your BMC if you
+ don't know what you're doing. Consider --mtd to be safe(r)
+
+ -F filename, --flash-file filename
+ Target filename instead of actual flash.
+
+ -S, --side
+ Side of the flash on which to operate, 0 (default) or 1
+
+ --skip=N
+ Skip N number of bytes from the start when reading
+
+ -T, --toc
+ libffs TOC on which to operate, defaults to 0.
+ leading 0x is required for interpretation of a hex value
+
+ -g
+ Enable verbose libflash debugging
+
+ Commands:
+ -4, --enable-4B
+ Switch the flash and controller to 4-bytes address
+ mode (no confirmation needed).
+
+ -3, --disable-4B
+ Switch the flash and controller to 3-bytes address
+ mode (no confirmation needed).
+
+ -r file, --read=file
+ Read flash content from address into file, use -s
+ to specify the size to read (or it will use the source
+ file size if used in conjunction with -p and -s is not
+ specified). When using -r together with -e or -p, the
+ read will be performed first
+
+ -E, --erase-all
+ Erase entire flash chip
+ (Not supported on all chips/controllers)
+
+ -e, --erase
+ Erase the specified region. If size or address are not
+ specified, but '--program' is used, then the file
+ size will be used (rounded to an erase block) and the
+ address defaults to 0.
+
+ -p file, --program=file
+ Will program the file to flash. If the address is not
+ specified, it will use 0. If the size is not specified
+ it will use the file size. Otherwise it will limit to
+ the specified size (whatever is smaller). If used in
+ conjunction with any erase command, the erase will
+ take place first.
+
+ -t, --tune
+ Just tune the flash controller & access size
+ Must be used in conjuction with --direct
+ (Implicit for all other operations)
+
+ -c --clear
+ Used to ECC clear a partition of the flash
+ Must be used in conjunction with -P. Will erase the
+ partition and then set all the ECC bits as they should be
+
+ -9 --ecc
+ Encode/Decode ECC where specified in the FFS header.
+ This 9 byte ECC method is used for some OpenPOWER
+ partitions.
+ -i, --info
+ Display some information about the flash.
+
+ --detail
+ Displays detailed info about a particular partition.
+ Accepts a numeric partition or can be used in conjuction
+ with the -P flag.
+
+ -h, --help
+ This message.
+
+About to erase 0x00000300..0x00000400 !
+WARNING ! This will modify your HOST flash chip content !
+Enter "yes" to confirm:Erasing...
+
+[ ] 0%
+[= ] 1%
+[= ] 2%
+[== ] 3%
+[== ] 4%
+[=== ] 5%
+[=== ] 6%
+[==== ] 7%
+[==== ] 8%
+[===== ] 9%
+[===== ] 10%
+[====== ] 11%
+[====== ] 12%
+[======= ] 13%
+[======= ] 14%
+[======== ] 15%
+[======== ] 16%
+[========= ] 17%
+[========= ] 18%
+[========== ] 19%
+[========== ] 20%
+[=========== ] 21%
+[=========== ] 22%
+[============ ] 23%
+[============ ] 24%
+[============= ] 25%
+[============= ] 26%
+[============== ] 27%
+[============== ] 28%
+[=============== ] 29%
+[=============== ] 30%
+[================ ] 31%
+[================ ] 32%
+[================= ] 33%
+[================= ] 34%
+[================== ] 35%
+[================== ] 36%
+[=================== ] 37%
+[=================== ] 38%
+[==================== ] 39%
+[==================== ] 40%
+[===================== ] 41%
+[===================== ] 42%
+[====================== ] 43%
+[====================== ] 44%
+[======================= ] 45%
+[======================= ] 46%
+[======================== ] 47%
+[======================== ] 48%
+[========================= ] 49%
+[========================= ] 50%
+[========================== ] 51%
+[========================== ] 52%
+[=========================== ] 53%
+[=========================== ] 54%
+[============================ ] 55%
+[============================ ] 56%
+[============================= ] 57%
+[============================= ] 58%
+[============================== ] 59%
+[============================== ] 60%
+[=============================== ] 61%
+[=============================== ] 62%
+[================================ ] 63%
+[================================ ] 64%
+[================================= ] 65%
+[================================= ] 66%
+[================================== ] 67%
+[================================== ] 68%
+[=================================== ] 69%
+[=================================== ] 70%
+[==================================== ] 71%
+[==================================== ] 72%
+[===================================== ] 73%
+[===================================== ] 74%
+[====================================== ] 75%
+[====================================== ] 76%
+[======================================= ] 77%
+[======================================= ] 78%
+[======================================== ] 79%
+[======================================== ] 80%
+[========================================= ] 81%
+[========================================= ] 82%
+[========================================== ] 83%
+[========================================== ] 84%
+[=========================================== ] 85%
+[=========================================== ] 86%
+[============================================ ] 87%
+[============================================ ] 88%
+[============================================= ] 89%
+[============================================= ] 90%
+[============================================== ] 91%
+[============================================== ] 92%
+[=============================================== ] 93%
+[=============================================== ] 94%
+[================================================ ] 95%
+[================================================ ] 96%
+[================================================= ] 97%
+[================================================= ] 98%
+[==================================================] 99%
+[==================================================] 100%
+About to program "FILE" at 0x00000300..0x00000400 !
+Programming & Verifying...
+
+[ ] 0%
+[==================================================] 100%