diff options
Diffstat (limited to 'roms/skiboot/include/occ.h')
| -rw-r--r-- | roms/skiboot/include/occ.h | 291 |
1 files changed, 291 insertions, 0 deletions
diff --git a/roms/skiboot/include/occ.h b/roms/skiboot/include/occ.h new file mode 100644 index 000000000..f1a1e2da9 --- /dev/null +++ b/roms/skiboot/include/occ.h @@ -0,0 +1,291 @@ +// SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later +/* Copyright 2017-2019 IBM Corp. */ + +#include <chip.h> + +/* OCC Functions */ + +extern void occ_pstates_init(void); +extern void occ_fsp_init(void); +int find_master_and_slave_occ(uint64_t **master, uint64_t **slave, + int *nr_masters, int *nr_slaves); + +/* OCC interrupt for P8 */ +extern void occ_p8_interrupt(uint32_t chip_id); +extern void occ_send_dummy_interrupt(void); + +/* OCC interrupt for P9 */ +extern void occ_p9_interrupt(uint32_t chip_id); + +/* OCC load support */ +extern void occ_poke_load_queue(void); + +/* OCC/Host PNOR ownership */ +enum pnor_owner { + PNOR_OWNER_HOST, + PNOR_OWNER_EXTERNAL, +}; +extern void occ_pnor_set_owner(enum pnor_owner owner); + +/* GPU presence detection */ +bool occ_get_gpu_presence(struct proc_chip *chip, int gpu_num); + +/* OCC Inband Sensors */ +extern bool occ_sensors_init(void); +extern int occ_sensor_read(u32 handle, __be64 *data); +extern int occ_sensor_group_clear(u32 group_hndl, int token); +extern void occ_add_sensor_groups(struct dt_node *sg, __be32 *phandles, + u32 *ptype, int nr_phandles, int chipid); + +extern int occ_sensor_group_enable(u32 group_hndl, int token, bool enable); + +extern bool is_occ_reset(void); + +/* + * OCC Sensor Data + * + * OCC sensor data will use BAR2 (OCC Common is per physical drawer). + * Starting address is at offset 0x00580000 from BAR2 base address. + * Maximum size is 1.5MB. + * + * ------------------------------------------------------------------------- + * | Start (Offset from | End | Size |Description | + * | BAR2 base address) | | | | + * ------------------------------------------------------------------------- + * | 0x00580000 | 0x005A57FF |150kB |OCC 0 Sensor Data Block| + * | 0x005A5800 | 0x005CAFFF |150kB |OCC 1 Sensor Data Block| + * | : | : | : | : | + * | 0x00686800 | 0x006ABFFF |150kB |OCC 7 Sensor Data Block| + * | 0x006AC000 | 0x006FFFFF |336kB |Reserved | + * ------------------------------------------------------------------------- + * + * + * OCC N Sensor Data Block Layout (150kB) + * + * The sensor data block layout is the same for each OCC N. It contains + * sensor-header-block, sensor-names buffer, sensor-readings-ping buffer and + * sensor-readings-pong buffer. + * + * ---------------------------------------------------------------------------- + * | Start (Offset from OCC | End | Size |Description | + * | N Sensor Data Block) | | | | + * ---------------------------------------------------------------------------- + * | 0x00000000 | 0x000003FF |1kB |Sensor Data Header Block | + * | 0x00000400 | 0x0000CBFF |50kB |Sensor Names | + * | 0x0000CC00 | 0x0000DBFF |4kB |Reserved | + * | 0x0000DC00 | 0x00017BFF |40kB |Sensor Readings ping buffer| + * | 0x00017C00 | 0x00018BFF |4kB |Reserved | + * | 0x00018C00 | 0x00022BFF |40kB |Sensor Readings pong buffer| + * | 0x00022C00 | 0x000257FF |11kB |Reserved | + * ---------------------------------------------------------------------------- + * + * Sensor Data Header Block : This is written once by the OCC during + * initialization after a load or reset. Layout is defined in 'struct + * occ_sensor_data_header' + * + * Sensor Names : This is written once by the OCC during initialization after a + * load or reset. It contains static information for each sensor. The number of + * sensors, format version and length of each sensor is defined in + * 'Sensor Data Header Block'. Format of each sensor name is defined in + * 'struct occ_sensor_name'. The first sensor starts at offset 0 followed + * immediately by the next sensor. + * + * Sensor Readings Ping/Pong Buffer: + * There are two 40kB buffers to store the sensor readings. One buffer that + * is currently being updated by the OCC and one that is available to be read. + * Each of these buffers will be of the same format. The number of sensors and + * the format version of the ping and pong buffers is defined in the + * 'Sensor Data Header Block'. + * + * Each sensor within the ping and pong buffers may be of a different format + * and length. For each sensor the length and format is determined by its + * 'struct occ_sensor_name.structure_type' in the Sensor Names buffer. + * + * -------------------------------------------------------------------------- + * | Offset | Byte0 | Byte1 | Byte2 | Byte3 | Byte4 | Byte5 | Byte6 | Byte7 | + * -------------------------------------------------------------------------- + * | 0x0000 |Valid | Reserved | + * | |(0x01) | | + * -------------------------------------------------------------------------- + * | 0x0008 | Sensor Readings | + * -------------------------------------------------------------------------- + * | : | : | + * -------------------------------------------------------------------------- + * | 0xA000 | End of Data | + * -------------------------------------------------------------------------- + * + */ + +#define MAX_OCCS 8 +#define MAX_CHARS_SENSOR_NAME 16 +#define MAX_CHARS_SENSOR_UNIT 4 + +#define OCC_SENSOR_DATA_BLOCK_OFFSET 0x00580000 +#define OCC_SENSOR_DATA_BLOCK_SIZE 0x00025800 + +/* + * These should match the definitions inside the OCC source: + * occ/src/occ_405/sensor/sensor_info.c + */ + +enum occ_sensor_type { + OCC_SENSOR_TYPE_GENERIC = 0x0001, + OCC_SENSOR_TYPE_CURRENT = 0x0002, + OCC_SENSOR_TYPE_VOLTAGE = 0x0004, + OCC_SENSOR_TYPE_TEMPERATURE = 0x0008, + OCC_SENSOR_TYPE_UTILIZATION = 0x0010, + OCC_SENSOR_TYPE_TIME = 0x0020, + OCC_SENSOR_TYPE_FREQUENCY = 0x0040, + OCC_SENSOR_TYPE_POWER = 0x0080, + OCC_SENSOR_TYPE_PERFORMANCE = 0x0200, +}; + +#define OCC_ENABLED_SENSOR_MASK (OCC_SENSOR_TYPE_GENERIC | \ + OCC_SENSOR_TYPE_CURRENT | \ + OCC_SENSOR_TYPE_VOLTAGE | \ + OCC_SENSOR_TYPE_TIME | \ + OCC_SENSOR_TYPE_TEMPERATURE | \ + OCC_SENSOR_TYPE_POWER | \ + OCC_SENSOR_TYPE_UTILIZATION | \ + OCC_SENSOR_TYPE_FREQUENCY | \ + OCC_SENSOR_TYPE_PERFORMANCE); + +enum occ_sensor_location { + OCC_SENSOR_LOC_SYSTEM = 0x0001, + OCC_SENSOR_LOC_PROCESSOR = 0x0002, + OCC_SENSOR_LOC_PARTITION = 0x0004, + OCC_SENSOR_LOC_MEMORY = 0x0008, + OCC_SENSOR_LOC_VRM = 0x0010, + OCC_SENSOR_LOC_OCC = 0x0020, + OCC_SENSOR_LOC_CORE = 0x0040, + OCC_SENSOR_LOC_GPU = 0x0080, + OCC_SENSOR_LOC_QUAD = 0x0100, +}; + +enum sensor_struct_type { + OCC_SENSOR_READING_FULL = 0x01, + OCC_SENSOR_READING_COUNTER = 0x02, +}; + +/** + * struct occ_sensor_data_header - Sensor Data Header Block + * @valid: When the value is 0x01 it indicates + * that this header block and the sensor + * names buffer are ready + * @version: Format version of this block + * @nr_sensors: Number of sensors in names, ping and + * pong buffer + * @reading_version: Format version of the Ping/Pong buffer + * @names_offset: Offset to the location of names buffer + * @names_version: Format version of names buffer + * @names_length: Length of each sensor in names buffer + * @reading_ping_offset: Offset to the location of Ping buffer + * @reading_pong_offset: Offset to the location of Pong buffer + * @pad/reserved: Unused data + */ +struct occ_sensor_data_header { + u8 valid; + u8 version; + __be16 nr_sensors; + u8 reading_version; + u8 pad[3]; + __be32 names_offset; + u8 names_version; + u8 name_length; + u16 reserved; + __be32 reading_ping_offset; + __be32 reading_pong_offset; +} __attribute__((__packed__)); + +/** + * struct occ_sensor_name - Format of Sensor Name + * @name: Sensor name + * @units: Sensor units of measurement + * @gsid: Global sensor id (OCC) + * @freq: Update frequency + * @scale_factor: Scaling factor + * @type: Sensor type as defined in + * 'enum occ_sensor_type' + * @location: Sensor location as defined in + * 'enum occ_sensor_location' + * @structure_type: Indicates type of data structure used + * for the sensor readings in the ping and + * pong buffers for this sensor as defined + * in 'enum sensor_struct_type' + * @reading_offset: Offset from the start of the ping/pong + * reading buffers for this sensor + * @sensor_data: Sensor specific info + * @pad: Padding to fit the size of 48 bytes. + */ +struct occ_sensor_name { + char name[MAX_CHARS_SENSOR_NAME]; + char units[MAX_CHARS_SENSOR_UNIT]; + __be16 gsid; + __be32 freq; + __be32 scale_factor; + __be16 type; + __be16 location; + u8 structure_type; + __be32 reading_offset; + u8 sensor_data; + u8 pad[8]; +} __attribute__((__packed__)); + +/** + * struct occ_sensor_record - Sensor Reading Full + * @gsid: Global sensor id (OCC) + * @timestamp: Time base counter value while updating + * the sensor + * @sample: Latest sample of this sensor + * @sample_min: Minimum value since last OCC reset + * @sample_max: Maximum value since last OCC reset + * @csm_min: Minimum value since last reset request + * by CSM (CORAL) + * @csm_max: Maximum value since last reset request + * by CSM (CORAL) + * @profiler_min: Minimum value since last reset request + * by profiler (CORAL) + * @profiler_max: Maximum value since last reset request + * by profiler (CORAL) + * @job_scheduler_min: Minimum value since last reset request + * by job scheduler(CORAL) + * @job_scheduler_max: Maximum value since last reset request + * by job scheduler (CORAL) + * @accumulator: Accumulator for this sensor + * @update_tag: Count of the number of ticks that have + * passed between updates + * @pad: Padding to fit the size of 48 bytes + */ +struct occ_sensor_record { + u16 gsid; + __be64 timestamp; + __be16 sample; + __be16 sample_min; + __be16 sample_max; + __be16 csm_min; + __be16 csm_max; + __be16 profiler_min; + __be16 profiler_max; + __be16 job_scheduler_min; + __be16 job_scheduler_max; + __be64 accumulator; + __be32 update_tag; + u8 pad[8]; +} __attribute__((__packed__)); + +/** + * struct occ_sensor_counter - Sensor Reading Counter + * @gsid: Global sensor id (OCC) + * @timestamp: Time base counter value while updating + * the sensor + * @accumulator: Accumulator/Counter + * @sample: Latest sample of this sensor (0/1) + * @pad: Padding to fit the size of 24 bytes + */ +struct occ_sensor_counter { + u16 gsid; + __be64 timestamp; + __be64 accumulator; + u8 sample; + u8 pad[5]; +} __attribute__((__packed__)); |