aboutsummaryrefslogtreecommitdiffstats
path: root/roms/skiboot/include/xscom-p9-regs.h
diff options
context:
space:
mode:
Diffstat (limited to 'roms/skiboot/include/xscom-p9-regs.h')
-rw-r--r--roms/skiboot/include/xscom-p9-regs.h109
1 files changed, 109 insertions, 0 deletions
diff --git a/roms/skiboot/include/xscom-p9-regs.h b/roms/skiboot/include/xscom-p9-regs.h
new file mode 100644
index 000000000..a2a17d0fc
--- /dev/null
+++ b/roms/skiboot/include/xscom-p9-regs.h
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
+/*
+ * Copyright 2016-2019 IBM Corp.
+ */
+
+#ifndef __XSCOM_P9_REGS_H__
+#define __XSCOM_P9_REGS_H__
+
+/* Core FIR (Fault Isolation Register) */
+#define P9_CORE_FIR 0x20010A40
+
+/* Core WOF (Whose On First) */
+#define P9_CORE_WOF 0x20010A48
+
+/* pMisc Receive Malfunction Alert Register */
+#define P9_MALFUNC_ALERT 0x00090022
+
+#define P9_NX_STATUS_REG 0x02011040 /* NX status register */
+#define P9_NX_DMA_ENGINE_FIR 0x02011100 /* DMA & Engine FIR Data Register */
+#define P9_NX_PBI_FIR 0x02011080 /* PowerBus Interface FIR Register */
+
+/*
+ * Bit 54 from NX status register is set to 1 when HMI interrupt is triggered
+ * due to NX checksop.
+ */
+#define NX_HMI_ACTIVE PPC_BIT(54)
+
+/* Direct controls */
+#define P9_EC_DIRECT_CONTROLS 0x10a9c
+#define P9_THREAD_STOP(t) PPC_BIT(7 + 8*(t))
+#define P9_THREAD_CONT(t) PPC_BIT(6 + 8*(t))
+#define P9_THREAD_SRESET(t) PPC_BIT(4 + 8*(t))
+#define P9_THREAD_CLEAR_MAINT(t) PPC_BIT(3 + 8*(t))
+#define P9_THREAD_PWR(t) PPC_BIT(32 + 8*(t))
+
+#define P9_RAS_STATUS 0x10a02
+#define P9_THREAD_QUIESCED(t) PPC_BITMASK(0 + 8*(t), 3 + 8*(t))
+
+#define P9_CORE_THREAD_STATE 0x10ab3
+#define P9_THREAD_INFO 0x10a9b
+
+/* EC_PPM_SPECIAL_WKUP_HYP */
+#define P9_SPWKUP_SET PPC_BIT(0)
+
+#define P9_EC_PPM_SSHHYP 0x0114
+#define P9_CORE_GATED PPC_BIT(0)
+#define P9_SPECIAL_WKUP_DONE PPC_BIT(1)
+
+/* EX (core pair) registers, use XSCOM_ADDR_P9_EX to access */
+#define P9X_EX_NCU_STATUS_REG 0x1100f
+#define P9X_EX_NCU_SPEC_BAR 0x11010
+#define P9X_EX_NCU_SPEC_BAR_ENABLE PPC_BIT(0)
+#define P9X_EX_NCU_SPEC_BAR_256K PPC_BIT(1)
+#define P9X_EX_NCU_SPEC_BAR_ADDRMSK 0x0fffffffffffc000ull /* naturally aligned */
+
+#define P9X_NX_MMIO_BAR 0x201108d
+#define P9X_NX_MMIO_BAR_EN PPC_BIT(52)
+#define P9X_NX_MMIO_OFFSET 0x00060302031d0000ull
+
+#define P9X_NX_RNG_CFG 0x20110E0
+#define P9X_NX_RNG_CFG_EN PPC_BIT(63)
+
+#define P9X_EX_NCU_DARN_BAR 0x11011
+#define P9X_EX_NCU_DARN_BAR_EN PPC_BIT(0)
+
+#define P9_GPIO_DATA_OUT 0x00000000000B0051ull
+#define P9_GPIO_DATA_OUT_ENABLE 0x00000000000B0054ull
+#define P9_GPIO_INTERRUPT_STATUS 0x00000000000B0057ull
+#define P9_GPIO_INTERRUPT_ENABLE 0x00000000000B005Dull
+#define P9_GPIO_INTERRUPT_CONDITION 0x00000000000B005Eull
+
+/* xscom address for SCOM Control and data Register */
+/* bits 54:60 of SCOM SPRC register is used for core specific SPR selection. */
+#define P9_SCOM_SPRC 0x20010A80
+#define P9_SCOMC_SPR_SELECT PPC_BITMASK(54, 60)
+#define P9_SCOMC_TFMR_T0 0x8 /* 0b0001000 TFMR */
+
+#define P9_SCOM_SPRD 0x20010A81
+
+#define PB_CENT_HP_MODE_CURR 0x5011c0c
+#define PB_CFG_CHG_RATE_GP_MASTER PPC_BIT(2)
+#define PB_CFG_PUMP_MODE PPC_BIT(54)
+
+/* Power 9 EC slave per-core power mgt slave registers */
+#define EC_PPM_SPECIAL_WKUP_OTR 0x010A
+#define EC_PPM_SPECIAL_WKUP_FSP 0x010B
+#define EC_PPM_SPECIAL_WKUP_OCC 0x010C
+#define EC_PPM_SPECIAL_WKUP_HYP 0x010D
+
+#define OB_BASE(ob) (((ob) + 9) << 24)
+#define OB_CPLT_CONF1(ob) (OB_BASE(ob) + 0x9)
+#define OB_CPLT_CONF1_NV_IOVALID(brk) PPC_BIT(6 + (brk))
+#define OB_INDIRECT(ob) ((OB_BASE(ob) + 0x10c3f) | PPC_BIT(0))
+
+/* PPE SRAM: Indirect address/data port */
+#define OB_PPE_CSAR(ob) (OB_BASE(ob) + 0x1104d)
+#define OB_PPE_CSAR_SRAM_ADDR PPC_BITMASK(16, 28)
+#define OB_PPE_CSDR(ob) (OB_BASE(ob) + 0x1104e)
+
+/* PPE SRAM: Indirect registers */
+#define OB_PPE_SALT_CMD 0x1fe6
+#define OB_PPE_SALT_CMD_READY PPC_BIT(0)
+#define OB_PPE_SALT_CMD_RW PPC_BIT(1)
+#define OB_PPE_SALT_CMD_ERR PPC_BIT(2)
+#define OB_PPE_SALT_CMD_LINKNUM PPC_BITMASK(15, 18)
+#define OB_PPE_SALT_CMD_REG PPC_BITMASK(19, 31)
+#define OB_PPE_SALT_CMD_DATA PPC_BITMASK(32, 63)
+
+#endif /* __XSCOM_P9_REGS_H__ */