diff options
Diffstat (limited to 'roms/skiboot/libstb/tss2/ibmtpm20tss/utils/regtests/testecc.bat')
| -rw-r--r-- | roms/skiboot/libstb/tss2/ibmtpm20tss/utils/regtests/testecc.bat | 324 |
1 files changed, 324 insertions, 0 deletions
diff --git a/roms/skiboot/libstb/tss2/ibmtpm20tss/utils/regtests/testecc.bat b/roms/skiboot/libstb/tss2/ibmtpm20tss/utils/regtests/testecc.bat new file mode 100644 index 000000000..5de54d60d --- /dev/null +++ b/roms/skiboot/libstb/tss2/ibmtpm20tss/utils/regtests/testecc.bat @@ -0,0 +1,324 @@ +REM ############################################################################# +REM # # +REM # TPM2 regression test # +REM # Written by Ken Goldman # +REM # IBM Thomas J. Watson Research Center # +REM # # +REM # (c) Copyright IBM Corporation 2015 - 2019. # +REM # # +REM # All rights reserved. # +REM # # +REM # Redistribution and use in source and binary forms, with or without # +REM # modification, are permitted provided that the following conditions are # +REM # met: # +REM # # +REM # Redistributions of source code must retain the above copyright notice, # +REM # this list of conditions and the following disclaimer. # +REM # # +REM # Redistributions in binary form must reproduce the above copyright # +REM # notice, this list of conditions and the following disclaimer in the # +REM # documentation and/or other materials provided with the distribution. # +REM # # +REM # Neither the names of the IBM Corporation nor the names of its # +REM # contributors may be used to endorse or promote products derived from # +REM # this software without specific prior written permission. # +REM # # +REM # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS # +REM # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT # +REM # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR # +REM # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT # +REM # HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, # +REM # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT # +REM # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, # +REM # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY # +REM # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT # +REM # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE # +REM # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # +REM # # +REM ############################################################################# + +setlocal enableDelayedExpansion + +echo "" +echo "ECC Ephemeral" +echo "" + +echo "" +echo "ECC Parameters and Ephemeral" +echo "" + +for %%C in (bnp256 nistp256 nistp384) do ( + + echo "ECC Parameters for curve %%C" + %TPM_EXE_PATH%eccparameters -cv %%C > run.out + IF !ERRORLEVEL! NEQ 0 ( + exit /B 1 + ) + + for %%A in (-si -sir) do ( + + echo "Create %%A for curve %%C" + %TPM_EXE_PATH%create -hp 80000000 -pwdp sto %%A -ecc %%C > run.out + IF !ERRORLEVEL! NEQ 0 ( + exit /B 1 + ) + + ) + + echo "EC Ephemeral for curve %%C" + %TPM_EXE_PATH%ecephemeral -ecc %%C > run.out + IF !ERRORLEVEL! NEQ 0 ( + exit /B 1 + ) +) + +echo "" +echo "ECC Commit" +echo "" + +echo "Start an HMAC auth session" +%TPM_EXE_PATH%startauthsession -se h > run.out +IF !ERRORLEVEL! NEQ 0 ( + exit /B 1 +) + +for %%K in ("-dau" "-dar") do ( + + for %%S in ("" "-se0 02000000 1") do ( + + echo "Create a %%~K ECDAA signing key under the primary key" + %TPM_EXE_PATH%create -hp 80000000 -ecc bnp256 %%~K -nalg sha256 -halg sha256 -kt f -kt p -opr tmprpriv.bin -opu tmprpub.bin -pwdp sto -pwdk siga > run.out + IF !ERRORLEVEL! NEQ 0 ( + exit /B 1 + ) + + echo "Load the signing key 80000001 under the primary key 80000000" + %TPM_EXE_PATH%load -hp 80000000 -ipr tmprpriv.bin -ipu tmprpub.bin -pwdp sto > run.out + IF !ERRORLEVEL! NEQ 0 ( + exit /B 1 + ) + + REM %TPM_EXE_PATH%getcapability -cap 1 -pr 80000001 + + REM The trick with commit is first use - empty ECC point and no s2 and y2 parameters + REM which means no P1, no s2 and no y2. + REM and output the result and get the efile.bin + REM feed back the point in efile.bin as the new p1 because it is on the curve. + + REM There is no test case for s2 and y2. To construct a y2 requires using Cipolla's algorithm. + REM example of normal command + REM %TPM_EXE_PATH%commit -hk 80000001 -pt p1.bin -s2 s2.bin -y2 y2_a.bin -Kf kfile.bin -Lf lfile.bin -Ef efile.bin -pwdk siga > run.out + + echo "Create new point E, based on point-multiply of TPM's commit random scalar and Generator point %%~S" + %TPM_EXE_PATH%commit -hk 80000001 -Ef efile.bin -pwdk siga %%~S > run.out + IF !ERRORLEVEL! NEQ 0 ( + exit /B 1 + ) + + REM copy efile as new p1 - for hash operation + cp efile.bin p1.bin + + REM We have a point on the curve - in efile.bin. Use E as P1 and feed it back in + + REM All this does is simulate the commit that the FIDO alliance wants to + REM use in its TPM Join operation. + + echo "Create new point E, based on point-multiply of TPM's commit random scalar and input point %%~S" + %TPM_EXE_PATH%commit -hk 80000001 -pt p1.bin -Ef efile.bin -cf counterfile.bin -pwdk siga %%~S > run.out + IF !ERRORLEVEL! NEQ 0 ( + exit /B 1 + ) + + cat efile.bin p1.bin tmprpub.bin > hashinput.bin + + echo "Hash the E, P1, and Q to create the ticket to use in signing" + %TPM_EXE_PATH%hash -hi p -halg sha256 -if hashinput.bin -oh outhash.bin -tk tfile.bin > run.out + IF !ERRORLEVEL! NEQ 0 ( + exit /B 1 + ) + + echo "Sign the hash of the points made from commit" + %TPM_EXE_PATH%sign -hk 80000001 -pwdk siga -salg ecc -scheme ecdaa -cf counterfile.bin -if hashinput.bin -os sig.bin -tk tfile.bin > run.out + IF !ERRORLEVEL! NEQ 0 ( + exit /B 1 + ) + + echo "Flush the signing key" + %TPM_EXE_PATH%flushcontext -ha 80000001 > run.out + IF !ERRORLEVEL! NEQ 0 ( + exit /B 1 + ) + ) +) + +REM save old counterfile for off nominal error check +cp counterfile.bin counterfileold.bin + + +for %%K in ("-dau" "-dar") do ( + for %%S in ("" "-se0 02000000 1") do ( + + echo "Create a %%~K ECDAA signing primary key" + %TPM_EXE_PATH%createprimary -ecc bnp256 %%~K -nalg sha256 -halg sha256 -kt f -kt p -opu tmprpub.bin -pwdk siga > run.out + IF !ERRORLEVEL! NEQ 0 ( + exit /B 1 + ) + + REM %TPM_EXE_PATH%getcapability -cap 1 -pr 80000001 + + REM The trick with commit is first use - empty ECC point and no s2 and y2 parameters + REM which means no P1, no s2 and no y2. + REM and output the result and get the efile.bin + REM feed back the point in efile.bin as the new p1 because it is on the curve. + + REM There is no test case for s2 and y2. To construct a y2 requires using Cipolla's algorithm. + REM example of normal command + REM %TPM_EXE_PATH%commit -hk 80000001 -pt p1.bin -s2 s2.bin -y2 y2_a.bin -Kf kfile.bin -Lf lfile.bin -Ef efile.bin -cf counterfile.bin -pwdk siga > run.out + + echo "Create new point E, based on point-multiply of TPM's commit random scalar and Generator point %%~S" + %TPM_EXE_PATH%commit -hk 80000001 -Ef efile.bin -cf counterfile.bin -pwdk siga %%~S > run.out + IF !ERRORLEVEL! NEQ 0 ( + exit /B 1 + ) + + REM copy efile as new p1 - for hash operation + cp efile.bin p1.bin + + REM We have a point on the curve - in efile.bin. Use E as P1 and feed it back in + + REM All this does is simulate the commit that the FIDO alliance wants to + REM use in its TPM Join operation. + + echo "Create new point E, based on point-multiply of TPM's commit random scalar and input point %%~S" + %TPM_EXE_PATH%commit -hk 80000001 -pt efile.bin -Ef efile.bin -pwdk siga %%~S > run.out + IF !ERRORLEVEL! NEQ 0 ( + exit /B 1 + ) + + cat efile.bin p1.bin tmprpub.bin > hashinput.bin + + echo "Hash the E, P1, and Q to create the ticket to use in signing" + %TPM_EXE_PATH%hash -hi p -halg sha256 -if hashinput.bin -oh outhash.bin -tk tfile.bin > run.out + IF !ERRORLEVEL! NEQ 0 ( + exit /B 1 + ) + + echo "Check error case bad counter" + %TPM_EXE_PATH%sign -hk 80000001 -pwdk siga -salg ecc -scheme ecdaa -cf counterfileold.bin -if hashinput.bin -os sig.bin -tk tfile.bin > run.out + IF !ERRORLEVEL! EQU 0 ( + exit /B 1 + ) + + echo "Sign the hash of the points made from commit" + %TPM_EXE_PATH%sign -hk 80000001 -pwdk siga -salg ecc -scheme ecdaa -cf counterfile.bin -if hashinput.bin -os sig.bin -tk tfile.bin > run.out + IF !ERRORLEVEL! NEQ 0 ( + exit /B 1 + ) + + echo "Flush the signing key" + %TPM_EXE_PATH%flushcontext -ha 80000001 > run.out + IF !ERRORLEVEL! NEQ 0 ( + exit /B 1 + ) + + ) +) + +echo "Flush the session" +%TPM_EXE_PATH%flushcontext -ha 02000000 > run.out +IF !ERRORLEVEL! NEQ 0 ( + exit /B 1 +) + +echo "" +echo "ECC zgen2phase" +echo "" + +echo "ECC Parameters for curve nistp256" +%TPM_EXE_PATH%eccparameters -cv nistp256 > run.out +IF !ERRORLEVEL! NEQ 0 ( + exit /B 1 +) + +REM This is just a script for a B "remote" side to create a static key +REM pair and ephemeral for use in demonstrating (on the local side) a +REM two-phase operation involving ecephemeral and zgen2phase + +echo "Create decryption key for curve nistp256" +%TPM_EXE_PATH%create -hp 80000000 -pwdp sto -den -ecc nistp256 -opu QsBpub.bin > run.out +IF !ERRORLEVEL! NEQ 0 ( + exit /B 1 +) + +echo "EC Ephemeral for curve nistp256" +%TPM_EXE_PATH%ecephemeral -ecc nistp256 -oq QeBpt.bin > run.out +IF !ERRORLEVEL! NEQ 0 ( + exit /B 1 +) + +REM local side +REM +REM scp or cp the QsBpub.bin and QeBpt.bin from the B side over to the +REM A side. This assumes QsBpub is a TPM2B_PUBLIC from a create command +REM on B side. QeBpt is already in TPM2B_ECC_POINT form since it was +REM created by ecephemeral on B side QsBpub.bin is presumed in a form +REM produced by a create commamnd using another TPM + +echo "Create decryption key for curve nistp256" +%TPM_EXE_PATH%create -hp 80000000 -pwdp sto -den -ecc nistp256 -opr QsApriv.bin -opu QsApub.bin > run.out +IF !ERRORLEVEL! NEQ 0 ( + exit /B 1 +) + +echo "Load the decryption key under the primary key, 80000001" +%TPM_EXE_PATH%load -hp 80000000 -ipr QsApriv.bin -ipu QsApub.bin -pwdp sto > run.out +IF !ERRORLEVEL! NEQ 0 ( + exit /B 1 +) + +echo "EC Ephemeral for curve nistp256" +%TPM_EXE_PATH%ecephemeral -ecc nistp256 -oq QeApt.bin -cf counter.bin > run.out +IF !ERRORLEVEL! NEQ 0 ( + exit /B 1 +) + +echo "Convert public raw to TPM2B_ECC_POINT" +%TPM_EXE_PATH%tpmpublic2eccpoint -ipu QsBpub.bin -pt QsBpt.bin > run.out +IF !ERRORLEVEL! NEQ 0 ( + exit /B 1 +) + +echo "Execute zgen2phase for curve nistp256" +%TPM_EXE_PATH%zgen2phase -hk 80000001 -scheme ecdh -qsb QsBpt.bin -qeb QeBpt.bin -cf counter.bin > run.out +IF !ERRORLEVEL! NEQ 0 ( + exit /B 1 +) + +echo "Flush the key" +%TPM_EXE_PATH%flushcontext -ha 80000001 > run.out +IF !ERRORLEVEL! NEQ 0 ( + exit /B 1 +) + +rm -rf efile.bin +rm -rf tmprpub.bin +rm -rf tmprpriv.bin +rm -rf counterfile.bin +rm -rf counterfileold.bin +rm -rf p1.bin +rm -rf hashinput.bin +rm -rf outhash.bin +rm -rf sig.bin +rm -rf tfile.bin + +rm -rf QsBpub.bin +rm -rf QeBpt.bin +rm -rf QsApriv.bin +rm -rf QsApub.bin +rm -rf QeApt.bin +rm -rf counter.bin +rm -rf QsBpt.bin + +REM %TPM_EXE_PATH%getcapability -cap 1 -pr 80000000 +REM %TPM_EXE_PATH%getcapability -cap 1 -pr 02000000 +exit /B 0 |