aboutsummaryrefslogtreecommitdiffstats
path: root/roms/u-boot-sam460ex/drivers/pci/pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'roms/u-boot-sam460ex/drivers/pci/pci.c')
-rw-r--r--roms/u-boot-sam460ex/drivers/pci/pci.c646
1 files changed, 646 insertions, 0 deletions
diff --git a/roms/u-boot-sam460ex/drivers/pci/pci.c b/roms/u-boot-sam460ex/drivers/pci/pci.c
new file mode 100644
index 000000000..ff0691cb4
--- /dev/null
+++ b/roms/u-boot-sam460ex/drivers/pci/pci.c
@@ -0,0 +1,646 @@
+/*
+ * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Andreas Heppel <aheppel@sysgo.de>
+ *
+ * (C) Copyright 2002, 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * PCI routines
+ */
+
+#include <common.h>
+
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <pci.h>
+
+#define PCI_HOSE_OP(rw, size, type) \
+int pci_hose_##rw##_config_##size(struct pci_controller *hose, \
+ pci_dev_t dev, \
+ int offset, type value) \
+{ \
+ return hose->rw##_##size(hose, dev, offset, value); \
+}
+
+PCI_HOSE_OP(read, byte, u8 *)
+PCI_HOSE_OP(read, word, u16 *)
+PCI_HOSE_OP(read, dword, u32 *)
+PCI_HOSE_OP(write, byte, u8)
+PCI_HOSE_OP(write, word, u16)
+PCI_HOSE_OP(write, dword, u32)
+
+#ifndef CONFIG_IXP425
+#define PCI_OP(rw, size, type, error_code) \
+int pci_##rw##_config_##size(pci_dev_t dev, int offset, type value) \
+{ \
+ struct pci_controller *hose = pci_bus_to_hose(PCI_BUS(dev)); \
+ \
+ if (!hose) \
+ { \
+ error_code; \
+ return -1; \
+ } \
+ \
+ return pci_hose_##rw##_config_##size(hose, dev, offset, value); \
+}
+
+PCI_OP(read, byte, u8 *, *value = 0xff)
+PCI_OP(read, word, u16 *, *value = 0xffff)
+PCI_OP(read, dword, u32 *, *value = 0xffffffff)
+PCI_OP(write, byte, u8, )
+PCI_OP(write, word, u16, )
+PCI_OP(write, dword, u32, )
+#endif /* CONFIG_IXP425 */
+
+#define PCI_READ_VIA_DWORD_OP(size, type, off_mask) \
+int pci_hose_read_config_##size##_via_dword(struct pci_controller *hose,\
+ pci_dev_t dev, \
+ int offset, type val) \
+{ \
+ u32 val32; \
+ \
+ if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0) { \
+ *val = -1; \
+ return -1; \
+ } \
+ \
+ *val = (val32 >> ((offset & (int)off_mask) * 8)); \
+ \
+ return 0; \
+}
+
+#define PCI_WRITE_VIA_DWORD_OP(size, type, off_mask, val_mask) \
+int pci_hose_write_config_##size##_via_dword(struct pci_controller *hose,\
+ pci_dev_t dev, \
+ int offset, type val) \
+{ \
+ u32 val32, mask, ldata, shift; \
+ \
+ if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0)\
+ return -1; \
+ \
+ shift = ((offset & (int)off_mask) * 8); \
+ ldata = (((unsigned long)val) & val_mask) << shift; \
+ mask = val_mask << shift; \
+ val32 = (val32 & ~mask) | ldata; \
+ \
+ if (pci_hose_write_config_dword(hose, dev, offset & 0xfc, val32) < 0)\
+ return -1; \
+ \
+ return 0; \
+}
+
+PCI_READ_VIA_DWORD_OP(byte, u8 *, 0x03)
+PCI_READ_VIA_DWORD_OP(word, u16 *, 0x02)
+PCI_WRITE_VIA_DWORD_OP(byte, u8, 0x03, 0x000000ff)
+PCI_WRITE_VIA_DWORD_OP(word, u16, 0x02, 0x0000ffff)
+
+/* Get a virtual address associated with a BAR region */
+void *pci_map_bar(pci_dev_t pdev, int bar, int flags)
+{
+ pci_addr_t pci_bus_addr;
+ u32 bar_response;
+
+ /* read BAR address */
+ pci_read_config_dword(pdev, bar, &bar_response);
+ pci_bus_addr = (pci_addr_t)(bar_response & ~0xf);
+
+ /*
+ * Pass "0" as the length argument to pci_bus_to_virt. The arg
+ * isn't actualy used on any platform because u-boot assumes a static
+ * linear mapping. In the future, this could read the BAR size
+ * and pass that as the size if needed.
+ */
+ return pci_bus_to_virt(pdev, pci_bus_addr, flags, 0, MAP_NOCACHE);
+}
+
+/*
+ *
+ */
+
+static struct pci_controller* hose_head = NULL;
+
+void pci_register_hose(struct pci_controller* hose)
+{
+ struct pci_controller **phose = &hose_head;
+
+ while(*phose)
+ phose = &(*phose)->next;
+
+ hose->next = NULL;
+
+ *phose = hose;
+}
+
+struct pci_controller *pci_bus_to_hose (int bus)
+{
+ struct pci_controller *hose;
+
+ for (hose = hose_head; hose; hose = hose->next)
+ if (bus >= hose->first_busno && bus <= hose->last_busno)
+ return hose;
+#ifdef DEBUG
+ printf("pci_bus_to_hose() failed\n");
+#endif
+ return NULL;
+}
+
+int pci_last_busno(void)
+{
+ struct pci_controller *hose = hose_head;
+
+ if (!hose)
+ return -1;
+
+ while (hose->next)
+ hose = hose->next;
+
+ return hose->last_busno;
+}
+
+#ifndef CONFIG_IXP425
+pci_dev_t pci_find_devices(struct pci_device_id *ids, int index)
+{
+ struct pci_controller * hose;
+ u16 vendor, device;
+ u8 header_type;
+ pci_dev_t bdf;
+ int i, bus, found_multi = 0;
+
+ for (hose = hose_head; hose; hose = hose->next)
+ {
+#ifdef CONFIG_SYS_SCSI_SCAN_BUS_REVERSE
+ for (bus = hose->last_busno; bus >= hose->first_busno; bus--)
+#else
+ for (bus = hose->first_busno; bus <= hose->last_busno; bus++)
+#endif
+ for (bdf = PCI_BDF(bus,0,0);
+#if defined(CONFIG_ELPPC) || defined(CONFIG_PPMC7XX)
+ bdf < PCI_BDF(bus,PCI_MAX_PCI_DEVICES-1,PCI_MAX_PCI_FUNCTIONS-1);
+#else
+ bdf < PCI_BDF(bus+1,0,0);
+#endif
+ bdf += PCI_BDF(0,0,1))
+ {
+ if (!PCI_FUNC(bdf)) {
+ pci_read_config_byte(bdf,
+ PCI_HEADER_TYPE,
+ &header_type);
+
+ found_multi = header_type & 0x80;
+ } else {
+ if (!found_multi)
+ continue;
+ }
+
+ pci_read_config_word(bdf,
+ PCI_VENDOR_ID,
+ &vendor);
+ pci_read_config_word(bdf,
+ PCI_DEVICE_ID,
+ &device);
+
+ for (i=0; ids[i].vendor != 0; i++)
+ if (vendor == ids[i].vendor &&
+ device == ids[i].device)
+ {
+ if (index <= 0)
+ return bdf;
+
+ index--;
+ }
+ }
+ }
+
+ return (-1);
+}
+#endif /* CONFIG_IXP425 */
+
+pci_dev_t pci_find_device(unsigned int vendor, unsigned int device, int index)
+{
+ static struct pci_device_id ids[2] = {{}, {0, 0}};
+
+ ids[0].vendor = vendor;
+ ids[0].device = device;
+
+ return pci_find_devices(ids, index);
+}
+
+/*
+ *
+ */
+
+int __pci_hose_phys_to_bus (struct pci_controller *hose,
+ phys_addr_t phys_addr,
+ unsigned long flags,
+ unsigned long skip_mask,
+ pci_addr_t *ba)
+{
+ struct pci_region *res;
+ pci_addr_t bus_addr;
+ int i;
+
+ for (i = 0; i < hose->region_count; i++) {
+ res = &hose->regions[i];
+
+ if (((res->flags ^ flags) & PCI_REGION_TYPE) != 0)
+ continue;
+
+ if (res->flags & skip_mask)
+ continue;
+
+ bus_addr = phys_addr - res->phys_start + res->bus_start;
+
+ if (bus_addr >= res->bus_start &&
+ bus_addr < res->bus_start + res->size) {
+ *ba = bus_addr;
+ return 0;
+ }
+ }
+
+ return 1;
+}
+
+pci_addr_t pci_hose_phys_to_bus (struct pci_controller *hose,
+ phys_addr_t phys_addr,
+ unsigned long flags)
+{
+ pci_addr_t bus_addr = 0;
+ int ret;
+
+ if (!hose) {
+ puts ("pci_hose_phys_to_bus: invalid hose\n");
+ return bus_addr;
+ }
+
+ /* if PCI_REGION_MEM is set we do a two pass search with preference
+ * on matches that don't have PCI_REGION_SYS_MEMORY set */
+ if ((flags & PCI_REGION_MEM) == PCI_REGION_MEM) {
+ ret = __pci_hose_phys_to_bus(hose, phys_addr,
+ flags, PCI_REGION_SYS_MEMORY, &bus_addr);
+ if (!ret)
+ return bus_addr;
+ }
+
+ ret = __pci_hose_phys_to_bus(hose, phys_addr, flags, 0, &bus_addr);
+
+ if (ret)
+ puts ("pci_hose_phys_to_bus: invalid physical address\n");
+
+ return bus_addr;
+}
+
+int __pci_hose_bus_to_phys (struct pci_controller *hose,
+ pci_addr_t bus_addr,
+ unsigned long flags,
+ unsigned long skip_mask,
+ phys_addr_t *pa)
+{
+ struct pci_region *res;
+ int i;
+
+ for (i = 0; i < hose->region_count; i++) {
+ res = &hose->regions[i];
+
+ if (((res->flags ^ flags) & PCI_REGION_TYPE) != 0)
+ continue;
+
+ if (res->flags & skip_mask)
+ continue;
+
+ if (bus_addr >= res->bus_start &&
+ bus_addr < res->bus_start + res->size) {
+ *pa = (bus_addr - res->bus_start + res->phys_start);
+ return 0;
+ }
+ }
+
+ return 1;
+}
+
+phys_addr_t pci_hose_bus_to_phys(struct pci_controller* hose,
+ pci_addr_t bus_addr,
+ unsigned long flags)
+{
+ phys_addr_t phys_addr = 0;
+ int ret;
+
+ if (!hose) {
+ puts ("pci_hose_bus_to_phys: invalid hose\n");
+ return phys_addr;
+ }
+
+ /* if PCI_REGION_MEM is set we do a two pass search with preference
+ * on matches that don't have PCI_REGION_SYS_MEMORY set */
+ if ((flags & PCI_REGION_MEM) == PCI_REGION_MEM) {
+ ret = __pci_hose_bus_to_phys(hose, bus_addr,
+ flags, PCI_REGION_SYS_MEMORY, &phys_addr);
+ if (!ret)
+ return phys_addr;
+ }
+
+ ret = __pci_hose_bus_to_phys(hose, bus_addr, flags, 0, &phys_addr);
+
+ if (ret)
+ puts ("pci_hose_bus_to_phys: invalid physical address\n");
+
+ return phys_addr;
+}
+
+/*
+ *
+ */
+
+int pci_hose_config_device(struct pci_controller *hose,
+ pci_dev_t dev,
+ unsigned long io,
+ pci_addr_t mem,
+ unsigned long command)
+{
+ unsigned int bar_response, old_command;
+ pci_addr_t bar_value;
+ pci_size_t bar_size;
+ unsigned char pin;
+ int bar, found_mem64;
+
+ debug ("PCI Config: I/O=0x%lx, Memory=0x%llx, Command=0x%lx\n",
+ io, (u64)mem, command);
+
+ pci_hose_write_config_dword (hose, dev, PCI_COMMAND, 0);
+
+ for (bar = PCI_BASE_ADDRESS_0; bar <= PCI_BASE_ADDRESS_5; bar += 4) {
+ pci_hose_write_config_dword (hose, dev, bar, 0xffffffff);
+ pci_hose_read_config_dword (hose, dev, bar, &bar_response);
+
+ if (!bar_response)
+ continue;
+
+ found_mem64 = 0;
+
+ /* Check the BAR type and set our address mask */
+ if (bar_response & PCI_BASE_ADDRESS_SPACE) {
+ bar_size = ~(bar_response & PCI_BASE_ADDRESS_IO_MASK) + 1;
+ /* round up region base address to a multiple of size */
+ io = ((io - 1) | (bar_size - 1)) + 1;
+ bar_value = io;
+ /* compute new region base address */
+ io = io + bar_size;
+ } else {
+ if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
+ PCI_BASE_ADDRESS_MEM_TYPE_64) {
+ u32 bar_response_upper;
+ u64 bar64;
+ pci_hose_write_config_dword(hose, dev, bar+4, 0xffffffff);
+ pci_hose_read_config_dword(hose, dev, bar+4, &bar_response_upper);
+
+ bar64 = ((u64)bar_response_upper << 32) | bar_response;
+
+ bar_size = ~(bar64 & PCI_BASE_ADDRESS_MEM_MASK) + 1;
+ found_mem64 = 1;
+ } else {
+ bar_size = (u32)(~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1);
+ }
+
+ /* round up region base address to multiple of size */
+ mem = ((mem - 1) | (bar_size - 1)) + 1;
+ bar_value = mem;
+ /* compute new region base address */
+ mem = mem + bar_size;
+ }
+
+ /* Write it out and update our limit */
+ pci_hose_write_config_dword (hose, dev, bar, (u32)bar_value);
+
+ if (found_mem64) {
+ bar += 4;
+#ifdef CONFIG_SYS_PCI_64BIT
+ pci_hose_write_config_dword(hose, dev, bar, (u32)(bar_value>>32));
+#else
+ pci_hose_write_config_dword (hose, dev, bar, 0x00000000);
+#endif
+ }
+ }
+
+ /* Configure Cache Line Size Register */
+ pci_hose_write_config_byte (hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
+
+ /* Configure Latency Timer */
+ pci_hose_write_config_byte (hose, dev, PCI_LATENCY_TIMER, 0x80);
+
+ /* Disable interrupt line, if device says it wants to use interrupts */
+ pci_hose_read_config_byte (hose, dev, PCI_INTERRUPT_PIN, &pin);
+ if (pin != 0) {
+ pci_hose_write_config_byte (hose, dev, PCI_INTERRUPT_LINE, 0xff);
+ }
+
+ pci_hose_read_config_dword (hose, dev, PCI_COMMAND, &old_command);
+ pci_hose_write_config_dword (hose, dev, PCI_COMMAND,
+ (old_command & 0xffff0000) | command);
+
+ return 0;
+}
+
+/*
+ *
+ */
+
+struct pci_config_table *pci_find_config(struct pci_controller *hose,
+ unsigned short class,
+ unsigned int vendor,
+ unsigned int device,
+ unsigned int bus,
+ unsigned int dev,
+ unsigned int func)
+{
+ struct pci_config_table *table;
+
+ for (table = hose->config_table; table && table->vendor; table++) {
+ if ((table->vendor == PCI_ANY_ID || table->vendor == vendor) &&
+ (table->device == PCI_ANY_ID || table->device == device) &&
+ (table->class == PCI_ANY_ID || table->class == class) &&
+ (table->bus == PCI_ANY_ID || table->bus == bus) &&
+ (table->dev == PCI_ANY_ID || table->dev == dev) &&
+ (table->func == PCI_ANY_ID || table->func == func)) {
+ return table;
+ }
+ }
+
+ return NULL;
+}
+
+void pci_cfgfunc_config_device(struct pci_controller *hose,
+ pci_dev_t dev,
+ struct pci_config_table *entry)
+{
+ pci_hose_config_device(hose, dev, entry->priv[0], entry->priv[1], entry->priv[2]);
+}
+
+void pci_cfgfunc_do_nothing(struct pci_controller *hose,
+ pci_dev_t dev, struct pci_config_table *entry)
+{
+}
+
+/*
+ *
+ */
+
+/* HJF: Changed this to return int. I think this is required
+ * to get the correct result when scanning bridges
+ */
+extern int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev);
+extern void pciauto_config_init(struct pci_controller *hose);
+
+int __pci_skip_dev(struct pci_controller *hose, pci_dev_t dev)
+{
+ /*
+ * Check if pci device should be skipped in configuration
+ */
+ if (dev == PCI_BDF(hose->first_busno, 0, 0)) {
+#if defined(CONFIG_PCI_CONFIG_HOST_BRIDGE) /* don't skip host bridge */
+ /*
+ * Only skip configuration if "pciconfighost" is not set
+ */
+ if (getenv("pciconfighost") == NULL)
+ return 1;
+#else
+ return 1;
+#endif
+ }
+
+ return 0;
+}
+int pci_skip_dev(struct pci_controller *hose, pci_dev_t dev)
+ __attribute__((weak, alias("__pci_skip_dev")));
+
+#ifdef CONFIG_PCI_SCAN_SHOW
+int __pci_print_dev(struct pci_controller *hose, pci_dev_t dev)
+{
+ if (dev == PCI_BDF(hose->first_busno, 0, 0))
+ return 0;
+
+ return 1;
+}
+int pci_print_dev(struct pci_controller *hose, pci_dev_t dev)
+ __attribute__((weak, alias("__pci_print_dev")));
+#endif /* CONFIG_PCI_SCAN_SHOW */
+
+int pci_hose_scan_bus(struct pci_controller *hose, int bus)
+{
+ unsigned int sub_bus, found_multi=0;
+ unsigned short vendor, device, class;
+ unsigned char header_type;
+ struct pci_config_table *cfg;
+ pci_dev_t dev;
+
+ sub_bus = bus;
+
+ for (dev = PCI_BDF(bus,0,0);
+ dev < PCI_BDF(bus,PCI_MAX_PCI_DEVICES-1,PCI_MAX_PCI_FUNCTIONS-1);
+ dev += PCI_BDF(0,0,1)) {
+
+ if (pci_skip_dev(hose, dev))
+ continue;
+
+ if (PCI_FUNC(dev) && !found_multi)
+ continue;
+
+ pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE, &header_type);
+
+ pci_hose_read_config_word(hose, dev, PCI_VENDOR_ID, &vendor);
+
+ if (vendor != 0xffff && vendor != 0x0000) {
+
+ if (!PCI_FUNC(dev))
+ found_multi = header_type & 0x80;
+
+ debug ("PCI Scan: Found Bus %d, Device %d, Function %d\n",
+ PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev) );
+
+ pci_hose_read_config_word(hose, dev, PCI_DEVICE_ID, &device);
+ pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class);
+
+ cfg = pci_find_config(hose, class, vendor, device,
+ PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev));
+ if (cfg) {
+ cfg->config_device(hose, dev, cfg);
+ sub_bus = max(sub_bus, hose->current_busno);
+#ifdef CONFIG_PCI_PNP
+ } else {
+ int n = pciauto_config_device(hose, dev);
+
+ sub_bus = max(sub_bus, n);
+#endif
+ }
+ if (hose->fixup_irq)
+ hose->fixup_irq(hose, dev);
+
+#ifdef CONFIG_PCI_SCAN_SHOW
+ if (pci_print_dev(hose, dev)) {
+ unsigned char int_line;
+
+ pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_LINE,
+ &int_line);
+ printf(" %02x %02x %04x %04x %04x %02x\n",
+ PCI_BUS(dev), PCI_DEV(dev), vendor, device, class,
+ int_line);
+ }
+#endif
+ }
+ }
+
+ return sub_bus;
+}
+
+int pci_hose_scan(struct pci_controller *hose)
+{
+ /* Start scan at current_busno.
+ * PCIe will start scan at first_busno+1.
+ */
+ /* For legacy support, ensure current>=first */
+ if (hose->first_busno > hose->current_busno)
+ hose->current_busno = hose->first_busno;
+#ifdef CONFIG_PCI_PNP
+ pciauto_config_init(hose);
+#endif
+ return pci_hose_scan_bus(hose, hose->current_busno);
+}
+
+void pci_init(void)
+{
+#if defined(CONFIG_PCI_BOOTDELAY)
+ char *s;
+ int i;
+
+ /* wait "pcidelay" ms (if defined)... */
+ s = getenv ("pcidelay");
+ if (s) {
+ int val = simple_strtoul (s, NULL, 10);
+ for (i=0; i<val; i++)
+ udelay (1000);
+ }
+#endif /* CONFIG_PCI_BOOTDELAY */
+
+ /* now call board specific pci_init()... */
+ pci_init_board();
+}