diff options
Diffstat (limited to 'roms/u-boot-sam460ex/include/configs/TQM5200.h')
| -rw-r--r-- | roms/u-boot-sam460ex/include/configs/TQM5200.h | 738 |
1 files changed, 738 insertions, 0 deletions
diff --git a/roms/u-boot-sam460ex/include/configs/TQM5200.h b/roms/u-boot-sam460ex/include/configs/TQM5200.h new file mode 100644 index 000000000..107bff19f --- /dev/null +++ b/roms/u-boot-sam460ex/include/configs/TQM5200.h @@ -0,0 +1,738 @@ +/* + * (C) Copyright 2003-2005 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004-2006 + * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_TQM5200 1 /* ... on TQM5200 module */ +#undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */ + +/* On a Cameron or on a FO300 board or ... */ +#if !defined(CONFIG_CAM5200) && !defined(CONFIG_FO300) +#define CONFIG_STK52XX 1 /* ... on a STK52XX board */ +#endif + +#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ + +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } +#define CONFIG_BOOTCOUNT_LIMIT 1 + +#ifdef CONFIG_FO300 +#define CONFIG_SYS_DEVICE_NULLDEV 1 /* enable null device */ +#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* used to detect S1 switch position */ +#define CONFIG_USB_BIN_FIXUP 1 /* for a buggy USB device */ +#if 0 +#define FO300_SILENT_CONSOLE_WHEN_S1_CLOSED 1 /* silent console on PSC1 when S1 */ + /* switch is closed */ +#endif + +#undef FO300_SILENT_CONSOLE_WHEN_S1_CLOSED /* silent console on PSC1 when S1 */ + /* switch is open */ +#endif /* CONFIG_FO300 */ + +#ifdef CONFIG_STK52XX +#define CONFIG_PS2KBD /* AT-PS/2 Keyboard */ +#define CONFIG_PS2MULT /* .. on PS/2 Multiplexer */ +#define CONFIG_PS2SERIAL 6 /* .. on PSC6 */ +#define CONFIG_PS2MULT_DELAY (CONFIG_SYS_HZ/2) /* Initial delay */ +#define CONFIG_BOARD_EARLY_INIT_R +#endif /* CONFIG_STK52XX */ + +/* + * PCI Mapping: + * 0x40000000 - 0x4fffffff - PCI Memory + * 0x50000000 - 0x50ffffff - PCI IO Space + */ +#ifdef CONFIG_STK52XX +#define CONFIG_PCI 1 +#define CONFIG_PCI_PNP 1 +/* #define CONFIG_PCI_SCAN_SHOW 1 */ + +#define CONFIG_PCI_MEM_BUS 0x40000000 +#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS +#define CONFIG_PCI_MEM_SIZE 0x10000000 + +#define CONFIG_PCI_IO_BUS 0x50000000 +#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS +#define CONFIG_PCI_IO_SIZE 0x01000000 + +#define CONFIG_NET_MULTI 1 +#define CONFIG_EEPRO100 1 +#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ +#define CONFIG_NS8382X 1 +#endif /* CONFIG_STK52XX */ + +/* + * Video console + */ +#ifndef CONFIG_TQM5200S /* No graphics controller on TQM5200S */ +#define CONFIG_VIDEO +#define CONFIG_VIDEO_SM501 +#define CONFIG_VIDEO_SM501_32BPP +#define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_LOGO + +#ifndef CONFIG_FO300 +#define CONFIG_CONSOLE_EXTRA_INFO +#else +#define CONFIG_VIDEO_BMP_LOGO +#endif + +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_VIDEO_SW_CURSOR +#define CONFIG_SPLASH_SCREEN +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#endif /* #ifndef CONFIG_TQM5200S */ + + +/* Partitions */ +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION + +/* USB */ +#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300) +#define CONFIG_USB_OHCI_NEW +#define CONFIG_SYS_OHCI_BE_CONTROLLER +#define CONFIG_USB_STORAGE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_USB + +#undef CONFIG_SYS_USB_OHCI_BOARD_INIT +#define CONFIG_SYS_USB_OHCI_CPU_INIT +#define CONFIG_SYS_USB_OHCI_REGS_BASE MPC5XXX_USB +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "mpc5200" +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 + +#endif + +#ifndef CONFIG_CAM5200 +/* POST support */ +#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \ + CONFIG_SYS_POST_CPU | \ + CONFIG_SYS_POST_I2C) +#endif + +#ifdef CONFIG_POST +/* preserve space for the post_word at end of on-chip SRAM */ +#define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4 +#endif + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SNTP +#define CONFIG_CMD_BSP + +#ifdef CONFIG_VIDEO + #define CONFIG_CMD_BMP +#endif + +#ifdef CONFIG_PCI +#define CONFIG_CMD_PCI +#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 +#endif + +#if defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX) || defined(CONFIG_FO300) + #define CONFIG_CMD_IDE + #define CONFIG_CMD_FAT + #define CONFIG_CMD_EXT2 +#endif + +#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300) + #define CONFIG_CFG_USB + #define CONFIG_CFG_FAT +#endif + +#ifdef CONFIG_POST + #define CONFIG_CMD_DIAG +#endif + + +#define CONFIG_TIMESTAMP /* display image timestamps */ + +#if (TEXT_BASE != 0xFFF00000) +# define CONFIG_SYS_LOWBOOT 1 /* Boot low */ +#endif + +/* + * Autobooting + */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#if defined(CONFIG_TQM5200_B) && !defined(CONFIG_SYS_LOWBOOT) +# define ENV_UPDT \ + "update=protect off FFF00000 +${filesize};" \ + "erase FFF00000 +${filesize};" \ + "cp.b 200000 FFF00000 ${filesize};" \ + "protect on FFF00000 +${filesize}\0" +#else /* default lowboot configuration */ +# define ENV_UPDT \ + "update=protect off FC000000 +${filesize};" \ + "erase FC000000 +${filesize};" \ + "cp.b 200000 FC000000 ${filesize};" \ + "protect on FC000000 +${filesize}\0" +#endif + +#if defined(CONFIG_TQM5200) +#define CUSTOM_ENV_SETTINGS \ + "hostname=tqm5200\0" \ + "bootfile=/tftpboot/tqm5200/uImage\0" \ + "fdt_file=/tftpboot/tqm5200/tqm5200.dtb\0" \ + "u-boot=/tftpboot/tqm5200/u-boot.bin\0" +#elif defined(CONFIG_CAM5200) +#define CUSTOM_ENV_SETTINGS \ + "bootfile=cam5200/uImage\0" \ + "u-boot=cam5200/u-boot.bin\0" \ + "setup=tftp 200000 cam5200/setup.img; source 200000\0" +#endif + +#if defined(CONFIG_TQM5200_B) +#define ENV_FLASH_LAYOUT \ + "fdt_addr=FC100000\0" \ + "kernel_addr=FC140000\0" \ + "ramdisk_addr=FC600000\0" +#else /* !CONFIG_TQM5200_B */ +#define ENV_FLASH_LAYOUT \ + "fdt_addr=FC0A0000\0" \ + "kernel_addr=FC0C0000\0" \ + "ramdisk_addr=FC300000\0" +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "console=ttyPSC0\0" \ + ENV_FLASH_LAYOUT \ + "kernel_addr_r=400000\0" \ + "fdt_addr_r=600000\0" \ + "rootpath=/opt/eldk/ppc_6xx\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addcons=setenv bootargs ${bootargs} " \ + "console=${console},${baudrate}\0" \ + "flash_self_old=sete console ttyS0; run ramargs addip addcons;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "flash_self=run ramargs addip addcons;" \ + "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ + "flash_nfs_old=sete console ttyS0; run nfsargs addip addcons;" \ + "bootm ${kernel_addr}\0" \ + "flash_nfs=run nfsargs addip addcons;" \ + "bootm ${kernel_addr} - ${fdt_addr}\0" \ + "net_nfs_old=tftp ${kernel_addr_r} ${bootfile};" \ + "sete console ttyS0; run nfsargs addip addcons;bootm\0" \ + "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ + "tftp ${fdt_addr_r} ${fdt_file}; " \ + "run nfsargs addip addcons; " \ + "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ + CUSTOM_ENV_SETTINGS \ + "load=tftp 200000 ${u-boot}\0" \ + ENV_UPDT \ + "" + +#define CONFIG_BOOTCOMMAND "run net_nfs" + +/* + * IPB Bus clocking configuration. + */ +#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ + +#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK) && !defined(CONFIG_CAM5200) +/* + * PCI Bus clocking configuration + * + * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if + * CONFIG_SYS_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock of + * 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz. + */ +#define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */ +#endif + +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#ifdef CONFIG_TQM5200_REV100 +#define CONFIG_SYS_I2C_MODULE 1 /* Select I2C module #1 for rev. 100 board */ +#else +#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #2 for all other revs */ +#endif + +/* + * I2C clock frequency + * + * Please notice, that the resulting clock frequency could differ from the + * configured value. This is because the I2C clock is derived from system + * clock over a frequency divider with only a few divider values. U-boot + * calculates the best approximation for CONFIG_SYS_I2C_SPEED. However the calculated + * approximation allways lies below the configured value, never above. + */ +#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ +#define CONFIG_SYS_I2C_SLAVE 0x7F + +/* + * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work + * also). For other EEPROMs configuration should be verified. On Mini-FAP the + * EEPROM (24C64) is on the same I2C address (but on other I2C bus), so the + * same configuration could be used. + */ +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 + +/* + * HW-Monitor configuration on Mini-FAP + */ +#if defined (CONFIG_MINIFAP) +#define CONFIG_SYS_I2C_HWMON_ADDR 0x2C +#endif + +/* List of I2C addresses to be verified by POST */ +#if defined (CONFIG_MINIFAP) +#undef I2C_ADDR_LIST +#define I2C_ADDR_LIST { CONFIG_SYS_I2C_EEPROM_ADDR, \ + CONFIG_SYS_I2C_HWMON_ADDR, \ + CONFIG_SYS_I2C_SLAVE } +#endif + +/* + * Flash configuration + */ +#define CONFIG_SYS_FLASH_BASE 0xFC000000 + +#if defined(CONFIG_CAM5200) && defined(CONFIG_CAM5200_NIOSFLASH) +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of flash banks + (= chip selects) */ +#define CONFIG_SYS_FLASH_WORD_SIZE unsigned int /* main flash device with */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CONFIG_SYS_FLASH_ADDR0 0x555 +#define CONFIG_SYS_FLASH_ADDR1 0x2AA +#define CONFIG_SYS_FLASH_2ND_16BIT_DEV 1 /* NIOS flash is a 16bit device */ +#define CONFIG_SYS_MAX_FLASH_SECT 128 +#else +/* use CFI flash driver */ +#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_BOOTCS_START } +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks + (= chip selects) */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ +#endif + +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* 64 MByte */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 + +#if defined (CONFIG_CAM5200) +# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00040000) +#elif defined(CONFIG_TQM5200_B) +# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00080000) +#else +# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00060000) +#endif + +/* Dynamic MTD partition support */ +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ +#define CONFIG_FLASH_CFI_MTD +#define MTDIDS_DEFAULT "nor0=TQM5200-0" + +#ifdef CONFIG_STK52XX +# if defined(CONFIG_TQM5200_B) +# if defined(CONFIG_SYS_LOWBOOT) +# define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:1m(firmware)," \ + "256k(dtb)," \ + "2304k(kernel)," \ + "2560k(small-fs)," \ + "2m(initrd)," \ + "8m(misc)," \ + "16m(big-fs)" +# else /* highboot */ +# define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:2560k(kernel)," \ + "3584k(small-fs)," \ + "2m(initrd)," \ + "8m(misc)," \ + "15m(big-fs)," \ + "1m(firmware)" +# endif /* CONFIG_SYS_LOWBOOT */ +# else /* !CONFIG_TQM5200_B */ +# define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:640k(firmware)," \ + "128k(dtb)," \ + "2304k(kernel)," \ + "2m(initrd)," \ + "4m(small-fs)," \ + "8m(misc)," \ + "15m(big-fs)" +# endif /* CONFIG_TQM5200_B */ +#elif defined (CONFIG_CAM5200) +# define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:768k(firmware)," \ + "1792k(kernel)," \ + "5632k(rootfs)," \ + "24m(home)" +#elif defined (CONFIG_FO300) +# define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:640k(firmware)," \ + "1408k(kernel)," \ + "2m(initrd)," \ + "4m(small-fs)," \ + "8m(misc)," \ + "16m(big-fs)" +#else +# error "Unknown Carrier Board" +#endif /* CONFIG_STK52XX */ + +/* + * Environment settings + */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_SIZE 0x4000 /* 16 k - keep small for fast booting */ +#if defined(CONFIG_TQM5200_B) || defined (CONFIG_CAM5200) +#define CONFIG_ENV_SECT_SIZE 0x40000 +#else +#define CONFIG_ENV_SECT_SIZE 0x20000 +#endif /* CONFIG_TQM5200_B */ +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) + +/* + * Memory map + */ +#define CONFIG_SYS_MBAR 0xF0000000 +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 + +/* Use ON-Chip SRAM until RAM will be available */ +#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM +#ifdef CONFIG_POST +/* preserve space for the post_word at end of on-chip SRAM */ +#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE +#else +#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE +#endif + + +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE +#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) +# define CONFIG_SYS_RAMBOOT 1 +#endif + +#if defined (CONFIG_CAM5200) +# define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#elif defined(CONFIG_TQM5200_B) +# define CONFIG_SYS_MONITOR_LEN (512 << 10) /* Reserve 512 kB for Monitor */ +#else +# define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */ +#endif + +#define CONFIG_SYS_MALLOC_LEN (1024 << 10) /* Reserve 1024 kB for malloc() */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* + * Ethernet configuration + */ +#define CONFIG_MPC5xxx_FEC 1 +#define CONFIG_MPC5xxx_FEC_MII100 +/* + * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb + */ +/* #define CONFIG_MPC5xxx_FEC_MII10 */ +#define CONFIG_PHY_ADDR 0x00 + +/* + * GPIO configuration + * + * use CS1: Bit 0 (mask: 0x80000000): + * 1 -> Pin gpio_wkup_6 as second SDRAM chip select (mem_cs1). + * use ALT CAN position: Bits 2-3 (mask: 0x30000000): + * 00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting. + * SPI on PSC3 according to PSC3 setting. Use for CAM5200. + * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1. + * Use for REV200 STK52XX boards and FO300 boards. Do not use + * with REV100 modules (because, there I2C1 is used as I2C bus). + * use ATA: Bits 6-7 (mask 0x03000000): + * 00 -> No ATA chip selects, csb_4/5 used as normal chip selects. + * Use for CAM5200 board. + * 01 -> ATA cs0/1 on csb_4/5. Use for the remaining boards. + * use PSC6: Bits 9-11 (mask 0x00700000): + * 000 -> use PSC6_0 to PSC6_3 as GPIO, PSC6 could not be used as + * UART, CODEC or IrDA. + * GPIO on PSC6_3 is used in post_hotkeys_pressed() to + * enable extended POST tests. + * Use for MINI-FAP and TQM5200_IB boards. + * 101 -> use PSC6 as UART. Pins PSC6_0 to PSC6_3 are used. + * Extended POST test is not available. + * Use for STK52xx, FO300 and CAM5200 boards. + * WARNING: When the extended POST is enabled, these bits will + * be overridden by this code as GPIOs! + * use PCI_DIS: Bit 16 (mask 0x00008000): + * 1 -> disable PCI controller (on CAM5200 board). + * use USB: Bits 18-19 (mask 0x00003000): + * 10 -> two UARTs (on FO300 and CAM5200). + * use PSC3: Bits 20-23 (mask: 0x00000f00): + * 0000 -> All PSC3 pins are GPIOs. + * 1100 -> UART/SPI (on FO300 board). + * 0100 -> UART (on CAM5200 board). + * use PSC2: Bits 25:27 (mask: 0x00000030): + * 000 -> All PSC2 pins are GPIOs. + * 100 -> UART (on CAM5200 board). + * 001 -> CAN1/2 on PSC2 pins. + * Use for REV100 STK52xx boards + * 01x -> Use AC97 (on FO300 board). + * use PSC1: Bits 29-31 (mask: 0x00000007): + * 100 -> UART (on all boards). + */ +#if defined (CONFIG_MINIFAP) +# define CONFIG_SYS_GPS_PORT_CONFIG 0x91000004 +#elif defined (CONFIG_STK52XX) +# if defined (CONFIG_STK52XX_REV100) +# define CONFIG_SYS_GPS_PORT_CONFIG 0x81500014 +# else /* STK52xx REV200 and above */ +# if defined (CONFIG_TQM5200_REV100) +# error TQM5200 REV100 not supported on STK52XX REV200 or above +# else/* TQM5200 REV200 and above */ +# define CONFIG_SYS_GPS_PORT_CONFIG 0x91500404 +# endif +# endif +#elif defined (CONFIG_FO300) +# define CONFIG_SYS_GPS_PORT_CONFIG 0x91502c24 +#elif defined (CONFIG_CAM5200) +# define CONFIG_SYS_GPS_PORT_CONFIG 0x8050A444 +#else /* TMQ5200 Inbetriebnahme-Board */ +# define CONFIG_SYS_GPS_PORT_CONFIG 0x81000004 +#endif + +/* + * RTC configuration + */ +#if defined (CONFIG_STK52XX) && !defined (CONFIG_STK52XX_REV100) +# define CONFIG_RTC_M41T11 1 +# define CONFIG_SYS_I2C_RTC_ADDR 0x68 +# define CONFIG_SYS_M41T11_BASE_YEAR 1900 /* because Linux uses the same base + year */ +#else +# define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */ +#endif + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ + +/* Enable an alternate, more extensive memory test */ +#define CONFIG_SYS_ALT_MEMTEST + +#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ + +#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ + +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ + +/* + * Enable loopw command. + */ +#define CONFIG_LOOPW + +/* + * Various low-level settings + */ +#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI +#define CONFIG_SYS_HID0_FINAL HID0_ICE + +#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE +#ifdef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 +#define CONFIG_SYS_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */ +#else +#define CONFIG_SYS_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */ +#endif +#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE + +#define CONFIG_LAST_STAGE_INIT + +/* + * SRAM - Do not map below 2 GB in address space, because this area is used + * for SDRAM autosizing. + */ +#define CONFIG_SYS_CS2_START 0xE5000000 +#define CONFIG_SYS_CS2_SIZE 0x100000 /* 1 MByte */ +#define CONFIG_SYS_CS2_CFG 0x0004D930 + +/* + * Grafic controller - Do not map below 2 GB in address space, because this + * area is used for SDRAM autosizing. + */ +#define SM501_FB_BASE 0xE0000000 +#define CONFIG_SYS_CS1_START (SM501_FB_BASE) +#define CONFIG_SYS_CS1_SIZE 0x4000000 /* 64 MByte */ +#define CONFIG_SYS_CS1_CFG 0x8F48FF70 +#define SM501_MMIO_BASE CONFIG_SYS_CS1_START + 0x03E00000 + +#define CONFIG_SYS_CS_BURST 0x00000000 +#define CONFIG_SYS_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for flash and SM501 */ + +#if defined(CONFIG_CAM5200) +#define CONFIG_SYS_CS4_START 0xB0000000 +#define CONFIG_SYS_CS4_SIZE 0x00010000 +#define CONFIG_SYS_CS4_CFG 0x01019C10 + +#define CONFIG_SYS_CS5_START 0xD0000000 +#define CONFIG_SYS_CS5_SIZE 0x01208000 +#define CONFIG_SYS_CS5_CFG 0x1414BF10 +#endif + +#define CONFIG_SYS_RESET_ADDRESS 0xff000000 + +/*----------------------------------------------------------------------- + * USB stuff + *----------------------------------------------------------------------- + */ +#define CONFIG_USB_CLOCK 0x0001BBBB +#define CONFIG_USB_CONFIG 0x00001000 + +/*----------------------------------------------------------------------- + * IDE/ATA stuff Supports IDE harddisk + *----------------------------------------------------------------------- + */ + +#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ + +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ + +#define CONFIG_IDE_RESET /* reset for ide supported */ +#define CONFIG_IDE_PREINIT + +#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ + +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 + +#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA + +/* Offset for data I/O */ +#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) + +/* Offset for normal register accesses */ +#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) + +/* Offset for alternate registers */ +#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) + +/* Interval between registers */ +#define CONFIG_SYS_ATA_STRIDE 4 + +/* Support ATAPI devices */ +#define CONFIG_ATAPI 1 + +/*----------------------------------------------------------------------- + * Open firmware flat tree support + *----------------------------------------------------------------------- + */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + +#define OF_CPU "PowerPC,5200@0" +#define OF_SOC "soc5200@f0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" + +#endif /* __CONFIG_H */ |