diff options
Diffstat (limited to 'roms/u-boot-sam460ex/include/configs/modnet50.h')
| -rw-r--r-- | roms/u-boot-sam460ex/include/configs/modnet50.h | 197 |
1 files changed, 197 insertions, 0 deletions
diff --git a/roms/u-boot-sam460ex/include/configs/modnet50.h b/roms/u-boot-sam460ex/include/configs/modnet50.h new file mode 100644 index 000000000..74bab5fc4 --- /dev/null +++ b/roms/u-boot-sam460ex/include/configs/modnet50.h @@ -0,0 +1,197 @@ +/* + * (C) Copyright 2004 + * IMMS, gGmbH <www.imms.de> + * Thomas Elste <info@elste.org> + * + * Configuation settings for ModNET50 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_ARM7 1 /* This is a ARM7 CPU */ +#define CONFIG_ARM_THUMB 1 /* this is an ARM720TDMI */ +#define CONFIG_NETARM /* it's a Netsiclicon NET+ARM */ +#undef CONFIG_NETARM_NET40_REV2 /* it's a Net+40 Rev. 2 */ +#undef CONFIG_NETARM_NET40_REV4 /* it's a Net+40 Rev. 4 */ +#define CONFIG_NETARM_NET50 /* it's a Net+50 */ + +#define CONFIG_MODNET50 1 /* on an ModNET50 Board */ + +#undef CONFIG_USE_IRQ /* don't need them anymore */ + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +/* + * Hardware drivers + */ +#define CONFIG_DRIVER_NETARMETH 1 + +/* + * select serial console configuration + */ +#define CONFIG_NETARM_SERIAL +#define CONFIG_SERIAL1 1 /* we use Serial line 1 */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 38400 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_JFFS2 + + +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.30.2 +#define CONFIG_SERVERIP 192.168.30.122 +#define CONFIG_SYS_ETH_PHY_ADDR 0x100 +#define CONFIG_CMDLINE_TAG /* submit bootargs to kernel */ + +/*#define CONFIG_BOOTDELAY 10*/ +/* args and cmd for uClinux-image @ 0x10020000, ramdisk-image @ 0x100a0000 */ +#define CONFIG_BOOTCOMMAND "bootm 0x10020000 0x100a0000" +#define CONFIG_BOOTARGS "console=ttyS0,38400 initrd=0x100a0040,530K " \ + "root=/dev/ram keepinitrd" + +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "modnet50 # " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x00800000 /* 4 ... 8 MB in DRAM */ + +#define CONFIG_SYS_LOAD_ADDR 0x00500000 /* default load address */ + +#define CONFIG_SYS_HZ 900 /* decrementer freq: 2 kHz */ + + /* valid baudrates */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below +*/ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 banks of DRAM */ +#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */ +#define PHYS_SDRAM_2 0x01000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_2_SIZE 0x01000000 /* 16 MB */ + +#define PHYS_FLASH_1 0x10000000 /* Flash Bank #1 */ +#define PHYS_FLASH_1_SIZE 0x00200000 /* 2 MB (one chip only, 16bit access) */ + +#define PHYS_FLASH_2 0x10200001 +#define PHYS_FLASH_2_SIZE 0x00200000 + +#define CONFIG_NETARM_EEPROM +/* #ifdef CONFIG_NETARM_EEPROM */ +#define PHYS_NVRAM_1 0x20000000 /* EEPROM Bank #1 */ +#define PHYS_NVRAM_SIZE 0x00002000 /* 8 KB */ +/* #endif */ + +#define PHYS_EXT_1 0x30000000 /* Extensions Bank #1 */ +#define PHYS_EXT_SIZE 0x01000000 /* 32 MB memory mapped I/O */ + +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_FLASH_SIZE PHYS_FLASH_1_SIZE + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 35 /* max number of sectors on one chip */ +#define CONFIG_SYS_MAIN_SECT_SIZE 0x00010000 /* main size of sectors on one chip */ + +/* timeout values are in ticks */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ +#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ + +/* environment settings */ +#define CONFIG_ENV_IS_IN_FLASH +#undef CONFIG_ENV_IS_NOWHERE + +#define CONFIG_ENV_ADDR 0x1001C000 /* environment start address */ +#define CONFIG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */ +#define CONFIG_ENV_SIZE 0x4000 /* max size for environment */ + +/* + * JFFS2 partitions + * + */ +/* No command line, one static partition, whole device */ +#undef CONFIG_CMD_MTDPARTS +#define CONFIG_JFFS2_DEV "nor0" +#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF +#define CONFIG_JFFS2_PART_OFFSET 0x00080000 + +/* mtdparts command line support */ +/* Note: fake mtd_id used, no linux mtd map file */ +/* +#define CONFIG_CMD_MTDPARTS +#define MTDIDS_DEFAULT "nor0=modnet50-0" +#define MTDPARTS_DEFAULT "mtdparts=modnet50-0:-@512k(jffs2)" +*/ + +#endif /* __CONFIG_H */ |