diff options
Diffstat (limited to 'roms/u-boot-sam460ex/include/post.h')
| -rw-r--r-- | roms/u-boot-sam460ex/include/post.h | 131 |
1 files changed, 131 insertions, 0 deletions
diff --git a/roms/u-boot-sam460ex/include/post.h b/roms/u-boot-sam460ex/include/post.h new file mode 100644 index 000000000..3da959d9a --- /dev/null +++ b/roms/u-boot-sam460ex/include/post.h @@ -0,0 +1,131 @@ +/* + * (C) Copyright 2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _POST_H +#define _POST_H + +#ifndef __ASSEMBLY__ +#include <common.h> +#endif + +#ifdef CONFIG_POST + +#define POST_POWERON 0x01 /* test runs on power-on booting */ +#define POST_NORMAL 0x02 /* test runs on normal booting */ +#define POST_SLOWTEST 0x04 /* test is slow, enabled by key press */ +#define POST_POWERTEST 0x08 /* test runs after watchdog reset */ + +#define POST_COLDBOOT 0x80 /* first boot after power-on */ + +#define POST_ROM 0x0100 /* test runs in ROM */ +#define POST_RAM 0x0200 /* test runs in RAM */ +#define POST_MANUAL 0x0400 /* test runs on diag command */ +#define POST_REBOOT 0x0800 /* test may cause rebooting */ +#define POST_PREREL 0x1000 /* test runs before relocation */ + +#define POST_CRITICAL 0x2000 /* Use failbootcmd if test failed */ +#define POST_STOP 0x4000 /* Interrupt POST sequence on fail */ + +#define POST_MEM (POST_RAM | POST_ROM) +#define POST_ALWAYS (POST_NORMAL | \ + POST_SLOWTEST | \ + POST_MANUAL | \ + POST_POWERON ) + +#define POST_FAIL_SAVE 0x80 + +#define POST_BEFORE 1 +#define POST_AFTER 0 +#define POST_PASSED 1 +#define POST_FAILED 0 + +#ifndef __ASSEMBLY__ + +struct post_test { + char *name; + char *cmd; + char *desc; + int flags; + int (*test) (int flags); + int (*init_f) (void); + void (*reloc) (void); + unsigned long testid; +}; +int post_init_f (void); +void post_bootmode_init (void); +int post_bootmode_get (unsigned int * last_test); +void post_bootmode_clear (void); +void post_output_backlog ( void ); +int post_run (char *name, int flags); +int post_info (char *name); +int post_log (char *format, ...); +#ifndef CONFIG_RELOC_FIXUP_WORKS +void post_reloc (void); +#endif +unsigned long post_time_ms (unsigned long base); + +extern struct post_test post_list[]; +extern unsigned int post_list_size; +extern int post_hotkeys_pressed(void); + +/* + * If GCC is configured to use a version of GAS that supports + * the .gnu_attribute directive, it will use that directive to + * record certain properties of the output code. + * This feature is new to GCC 4.3.0. + * .gnu_attribute is new to GAS 2.18. + */ +#if (__GNUC__ >= 4 && __GNUC_MINOR__ >= 3) +/* Tag_GNU_Power_ABI_FP/soft-float */ +#define GNU_FPOST_ATTR asm(".gnu_attribute 4, 2"); +#else +#define GNU_FPOST_ATTR +#endif /* __GNUC__ */ +#endif /* __ASSEMBLY__ */ + +#define CONFIG_SYS_POST_RTC 0x00000001 +#define CONFIG_SYS_POST_WATCHDOG 0x00000002 +#define CONFIG_SYS_POST_MEMORY 0x00000004 +#define CONFIG_SYS_POST_CPU 0x00000008 +#define CONFIG_SYS_POST_I2C 0x00000010 +#define CONFIG_SYS_POST_CACHE 0x00000020 +#define CONFIG_SYS_POST_UART 0x00000040 +#define CONFIG_SYS_POST_ETHER 0x00000080 +#define CONFIG_SYS_POST_SPI 0x00000100 +#define CONFIG_SYS_POST_USB 0x00000200 +#define CONFIG_SYS_POST_SPR 0x00000400 +#define CONFIG_SYS_POST_SYSMON 0x00000800 +#define CONFIG_SYS_POST_DSP 0x00001000 +#define CONFIG_SYS_POST_OCM 0x00002000 +#define CONFIG_SYS_POST_FPU 0x00004000 +#define CONFIG_SYS_POST_ECC 0x00008000 +#define CONFIG_SYS_POST_BSPEC1 0x00010000 +#define CONFIG_SYS_POST_BSPEC2 0x00020000 +#define CONFIG_SYS_POST_BSPEC3 0x00040000 +#define CONFIG_SYS_POST_BSPEC4 0x00080000 +#define CONFIG_SYS_POST_BSPEC5 0x00100000 +#define CONFIG_SYS_POST_CODEC 0x00200000 +#define CONFIG_SYS_POST_COPROC 0x00400000 + +#endif /* CONFIG_POST */ + +#endif /* _POST_H */ |