diff options
Diffstat (limited to 'roms/u-boot/arch/arm/cpu/armv7/ls102xa/fdt.c')
| -rw-r--r-- | roms/u-boot/arch/arm/cpu/armv7/ls102xa/fdt.c | 196 |
1 files changed, 196 insertions, 0 deletions
diff --git a/roms/u-boot/arch/arm/cpu/armv7/ls102xa/fdt.c b/roms/u-boot/arch/arm/cpu/armv7/ls102xa/fdt.c new file mode 100644 index 000000000..0daf8234f --- /dev/null +++ b/roms/u-boot/arch/arm/cpu/armv7/ls102xa/fdt.c @@ -0,0 +1,196 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + */ + +#include <common.h> +#include <clock_legacy.h> +#include <net.h> +#include <asm/global_data.h> +#include <linux/libfdt.h> +#include <fdt_support.h> +#include <asm/io.h> +#include <asm/processor.h> +#include <asm/arch/clock.h> +#include <linux/ctype.h> +#ifdef CONFIG_FSL_ESDHC +#include <fsl_esdhc.h> +#endif +#include <tsec.h> +#include <asm/arch/immap_ls102xa.h> +#include <fsl_sec.h> +#include <dm.h> + +DECLARE_GLOBAL_DATA_PTR; + +void ft_fixup_enet_phy_connect_type(void *fdt) +{ +#ifdef CONFIG_DM_ETH + struct udevice *dev; +#else + struct eth_device *dev; +#endif + struct tsec_private *priv; + const char *enet_path, *phy_path; + char enet[16]; + char phy[16]; + int phy_node; + int i = 0; + uint32_t ph; +#ifdef CONFIG_DM_ETH + char *name[3] = { "ethernet@2d10000", "ethernet@2d50000", + "ethernet@2d90000" }; +#else + char *name[3] = { "eTSEC1", "eTSEC2", "eTSEC3" }; +#endif + + for (; i < ARRAY_SIZE(name); i++) { + dev = eth_get_dev_by_name(name[i]); + if (dev) { + sprintf(enet, "ethernet%d", i); + sprintf(phy, "enet%d_rgmii_phy", i); + } else { + continue; + } + +#ifdef CONFIG_DM_ETH + priv = dev_get_priv(dev); +#else + priv = dev->priv; +#endif + if (priv->flags & TSEC_SGMII) + continue; + + enet_path = fdt_get_alias(fdt, enet); + if (!enet_path) + continue; + + phy_path = fdt_get_alias(fdt, phy); + if (!phy_path) + continue; + + phy_node = fdt_path_offset(fdt, phy_path); + if (phy_node < 0) + continue; + + ph = fdt_create_phandle(fdt, phy_node); + if (ph) + do_fixup_by_path_u32(fdt, enet_path, + "phy-handle", ph, 1); + + do_fixup_by_path(fdt, enet_path, "phy-connection-type", + phy_string_for_interface( + PHY_INTERFACE_MODE_RGMII_ID), + strlen(phy_string_for_interface( + PHY_INTERFACE_MODE_RGMII_ID)) + 1, + 1); + } +} + +void ft_cpu_setup(void *blob, struct bd_info *bd) +{ + int off; + int val; + const char *sysclk_path; + struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); + unsigned int svr; + svr = in_be32(&gur->svr); + + unsigned long busclk = get_bus_freq(0); + + /* delete crypto node if not on an E-processor */ + if (!IS_E_PROCESSOR(svr)) + fdt_fixup_crypto_node(blob, 0); +#if CONFIG_SYS_FSL_SEC_COMPAT >= 4 + else { + ccsr_sec_t __iomem *sec; + + sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR; + fdt_fixup_crypto_node(blob, sec_in32(&sec->secvid_ms)); + } +#endif + + off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); + while (off != -FDT_ERR_NOTFOUND) { + val = gd->cpu_clk; + fdt_setprop(blob, off, "clock-frequency", &val, 4); + off = fdt_node_offset_by_prop_value(blob, off, + "device_type", "cpu", 4); + } + + do_fixup_by_prop_u32(blob, "device_type", "soc", + 4, "bus-frequency", busclk, 1); + + ft_fixup_enet_phy_connect_type(blob); + +#ifdef CONFIG_SYS_NS16550 + do_fixup_by_compat_u32(blob, "fsl,16550-FIFO64", + "clock-frequency", CONFIG_SYS_NS16550_CLK, 1); +#endif + + sysclk_path = fdt_get_alias(blob, "sysclk"); + if (sysclk_path) + do_fixup_by_path_u32(blob, sysclk_path, "clock-frequency", + CONFIG_SYS_CLK_FREQ, 1); + do_fixup_by_compat_u32(blob, "fsl,qoriq-sysclk-2.0", + "clock-frequency", CONFIG_SYS_CLK_FREQ, 1); + +#if defined(CONFIG_DEEP_SLEEP) && defined(CONFIG_SD_BOOT) +#define UBOOT_HEAD_LEN 0x1000 + /* + * Reserved memory in SD boot deep sleep case. + * Second stage uboot binary and malloc space should be reserved. + * If the memory they occupied has not been reserved, then this + * space would be used by kernel and overwritten in uboot when + * deep sleep resume, which cause deep sleep failed. + * Since second uboot binary has a head, that space need to be + * reserved either(assuming its size is less than 0x1000). + */ + off = fdt_add_mem_rsv(blob, CONFIG_SYS_TEXT_BASE - UBOOT_HEAD_LEN, + CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_SPL_MALLOC_SIZE + + UBOOT_HEAD_LEN); + if (off < 0) + printf("Failed to reserve memory for SD boot deep sleep: %s\n", + fdt_strerror(off)); +#endif + +#if defined(CONFIG_FSL_ESDHC) + fdt_fixup_esdhc(blob, bd); +#endif + + /* + * platform bus clock = system bus clock/2 + * Here busclk = system bus clock + * We are using the platform bus clock as 1588 Timer reference + * clock source select + */ + do_fixup_by_compat_u32(blob, "fsl, gianfar-ptp-timer", + "timer-frequency", busclk / 2, 1); + + /* + * clock-freq should change to clock-frequency and + * flexcan-v1.0 should change to p1010-flexcan respectively + * in the future. + */ + do_fixup_by_compat_u32(blob, "fsl, flexcan-v1.0", + "clock_freq", busclk / 2, 1); + + do_fixup_by_compat_u32(blob, "fsl, flexcan-v1.0", + "clock-frequency", busclk / 2, 1); + + do_fixup_by_compat_u32(blob, "fsl, ls1021a-flexcan", + "clock-frequency", busclk / 2, 1); + +#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) + off = fdt_node_offset_by_compat_reg(blob, FSL_IFC_COMPAT, + CONFIG_SYS_IFC_ADDR); + fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0); +#else + off = fdt_node_offset_by_compat_reg(blob, FSL_QSPI_COMPAT, + QSPI0_BASE_ADDR); + fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0); + off = fdt_node_offset_by_compat_reg(blob, FSL_DSPI_COMPAT, + DSPI1_BASE_ADDR); + fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0); +#endif +} |