diff options
Diffstat (limited to 'roms/u-boot/arch/arm/dts/fsl-ls1028a-qds.dtsi')
| -rw-r--r-- | roms/u-boot/arch/arm/dts/fsl-ls1028a-qds.dtsi | 263 |
1 files changed, 263 insertions, 0 deletions
diff --git a/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds.dtsi b/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds.dtsi new file mode 100644 index 000000000..da89ff96e --- /dev/null +++ b/roms/u-boot/arch/arm/dts/fsl-ls1028a-qds.dtsi @@ -0,0 +1,263 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP ls1028AQDS device tree source + * + * Copyright 2019 NXP + * + */ + +/dts-v1/; + +#include "fsl-ls1028a.dtsi" + +/ { + model = "NXP Layerscape 1028a QDS Board"; + compatible = "fsl,ls1028a-qds", "fsl,ls1028a"; + aliases { + spi0 = &fspi; + spi1 = &dspi0; + spi2 = &dspi1; + spi3 = &dspi2; + }; + +}; + +&dspi0 { + bus-num = <0>; + status = "okay"; + + dflash0: sst25wf040b { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <3000000>; + spi-cpol; + spi-cpha; + reg = <0>; + }; + + dflash1: en25s64 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <3000000>; + spi-cpol; + spi-cpha; + reg = <1>; + }; + dflash2: n25q128a { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <3000000>; + spi-cpol; + spi-cpha; + reg = <2>; + }; +}; + +&dspi1 { + bus-num = <0>; + status = "okay"; + + dflash3: sst25wf040b { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <3000000>; + spi-cpol; + spi-cpha; + reg = <0>; + }; + + dflash4: en25s64 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <3000000>; + spi-cpol; + spi-cpha; + reg = <1>; + }; + dflash5: n25q128a { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <3000000>; + spi-cpol; + spi-cpha; + reg = <2>; + }; +}; + +&dspi2 { + bus-num = <0>; + status = "okay"; + + dflash8: en25s64 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <3000000>; + spi-cpol; + spi-cpha; + reg = <0>; + }; +}; + +&esdhc0 { + status = "okay"; +}; + +&esdhc1 { + status = "okay"; + +}; + +&fspi { + status = "okay"; + + mt35xu02g0: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <0>; + spi-rx-bus-width = <8>; + spi-tx-bus-width = <1>; + }; +}; + +&i2c0 { + status = "okay"; + u-boot,dm-pre-reloc; + + fpga@66 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "simple-mfd"; + reg = <0x66>; + + mux-mdio@54 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mdio-mux-i2creg"; + reg = <0x54>; + #mux-control-cells = <1>; + mux-reg-masks = <0x54 0xf0>; + mdio-parent-bus = <&mdio0>; + + /* on-board MDIO with a single RGMII PHY */ + mdio@00 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x00>; + + qds_phy0: phy@5 { + reg = <5>; + }; + }; + /* slot 1 */ + slot1: mdio@40 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x40>; + }; + /* slot 2 */ + slot2: mdio@50 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x50>; + }; + /* slot 3 */ + slot3: mdio@60 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x60>; + }; + /* slot 4 */ + slot4: mdio@70 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + }; + }; + }; + + i2c-mux@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; + +&i2c1 { + status = "okay"; + + rtc@51 { + compatible = "pcf2127-rtc"; + reg = <0x51>; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&lpuart0 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&serial0 { + status = "okay"; +}; + +&serial1 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; + +&enetc1 { + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&qds_phy0>; +}; + +&mdio0 { + status = "okay"; +}; + +#include "fsl-ls1028a-qds-8xxx-sch-24801.dtsi" +#include "fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi" |