diff options
Diffstat (limited to 'roms/u-boot/arch/arm/dts/imx6qdl-aristainetos2c_cslb.dtsi')
| -rw-r--r-- | roms/u-boot/arch/arm/dts/imx6qdl-aristainetos2c_cslb.dtsi | 232 |
1 files changed, 232 insertions, 0 deletions
diff --git a/roms/u-boot/arch/arm/dts/imx6qdl-aristainetos2c_cslb.dtsi b/roms/u-boot/arch/arm/dts/imx6qdl-aristainetos2c_cslb.dtsi new file mode 100644 index 000000000..c3724ec86 --- /dev/null +++ b/roms/u-boot/arch/arm/dts/imx6qdl-aristainetos2c_cslb.dtsi @@ -0,0 +1,232 @@ +// SPDX-License-Identifier: (GPL-2.0) +/* + * support for the imx6 based aristainetos2c-cslb board + * + * Copyright (C) 2019 Heiko Schocher <hs@denx.de> + * Copyright (C) 2015 Heiko Schocher <hs@denx.de> + * + */ +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/imx6qdl-clock.h> + +#include "imx6qdl-aristainetos2-common.dtsi" + +/ { + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio>; + + LED_blue { + label = "led_blue"; + gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; + }; + + LED_green { + label = "led_green"; + gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; + }; + + LED_red { + label = "led_red"; + gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; + }; + + LED_yellow { + label = "led_yellow"; + gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; + }; + + LED_blue_2 { + label = "led_blue2"; + gpios = <&expander 15 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + LED_green_2 { + label = "led_green2"; + gpios = <&expander 14 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + LED_red_2 { + label = "led_red2"; + gpios = <&expander 12 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + LED_yellow_2 { + label = "led_yellow2"; + gpios = <&expander 13 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + LED_ena { + label = "led_ena"; + gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&ecspi1 { + fsl,spi-num-chipselects = <3>; + cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH + &gpio4 10 GPIO_ACTIVE_HIGH + &gpio4 11 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + pinctrl-assert-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; + pinctrl-assert-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q128a11", "jedec,spi-nor"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&ecspi4 { + fsl,spi-num-chipselects = <2>; + cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi4>; + status = "okay"; +}; + +&i2c1 { + tpm@20 { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + }; +}; + +&gpio7 { + eMMC_reset { + gpio-hog; + output-high; + gpios = <8 GPIO_ACTIVE_HIGH>; + }; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <8>; + no-1-8-v; + non-removable; + status = "okay"; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + /* SS0# */ + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x100b1 + /* SS1# */ + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1 + /* SS2# */ + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x100b1 + /* WP pin NOR Flash */ + MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x4001b0b0 + /* Flash nReset */ + MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x4001b0b0 + >; + }; + + pinctrl_ecspi4: ecspi4grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 + MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 + MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x100b1 /* SS0# */ + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b1 /* SS1# */ + >; + }; + + pinctrl_gpio: gpiogrp { + fsl,pins = < + /* led enable */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x4001b0b0 + /* LCD power enable */ + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x4001b0b0 + /* led yellow */ + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x4001b0b0 + /* led red */ + MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x4001b0b0 + /* led green */ + MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x4001b0b0 + /* led blue */ + MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x4001b0b0 + /* Profibus IRQ */ + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 + /* FPGA IRQ currently unused*/ + MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0 + /* Display reset because of clock failure */ + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x4001b0b0 + /* spi bus #2 SS driver enable */ + MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x4001b0b0 + /* RST_LOC# PHY reset input (has pull-down!)*/ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x4001b0b0 + /* Touchscreen IRQ */ + MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0 + /* PCIe reset */ + MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x4001b0b0 + /* make sure pin is GPIO and not ENET_REF_CLK */ + MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x4001a0b0 + /* TPM PP */ + MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x4001b0b0 + /* TPM Reset */ + MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x4001b0b0 + /* eMMC Reset# */ + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x4001b0b0 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + /* SD1 card detect input */ + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x17059 + MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x17059 + MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x17059 + MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x17059 + >; + }; +}; |