diff options
Diffstat (limited to 'roms/u-boot/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi')
| -rw-r--r-- | roms/u-boot/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi | 163 |
1 files changed, 163 insertions, 0 deletions
diff --git a/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi b/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi new file mode 100644 index 000000000..9d3db2087 --- /dev/null +++ b/roms/u-boot/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi @@ -0,0 +1,163 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +/* + * Copyright : STMicroelectronics 2018 + * + * Copyright (C) Linaro Ltd 2019 - All Rights Reserved + * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + * Copyright (C) 2020 Marek Vasut <marex@denx.de> + */ + +#include <dt-bindings/clock/stm32mp1-clksrc.h> +#include "stm32mp15-u-boot.dtsi" +#include "stm32mp15-ddr3-dhsom-2x1Gb-1066-binG.dtsi" +#include "stm32mp15-ddr3-dhsom-2x2Gb-1066-binG.dtsi" +#include "stm32mp15-ddr3-dhsom-2x4Gb-1066-binG.dtsi" + +/ { + u-boot,dm-pre-reloc; + config { + dh,ddr3-coding-gpios = <&gpiog 0 0>, <&gpiog 1 0>; + dh,som-coding-gpios = <&gpioz 7 0>, <&gpiof 3 0>; + }; +}; + +&flash0 { + u-boot,dm-spl; +}; + +&gpiof { + snor-nwp { + gpio-hog; + gpios = <7 0>; + output-high; + line-name = "spi-nor-nwp"; + }; +}; + +&i2c4 { + u-boot,dm-pre-reloc; +}; + +&i2c4_pins_a { + u-boot,dm-pre-reloc; + pins { + u-boot,dm-pre-reloc; + }; +}; + +&pmic { + u-boot,dm-pre-reloc; +}; + +&qspi { + u-boot,dm-spl; +}; + +&qspi_clk_pins_a { + u-boot,dm-spl; + pins { + u-boot,dm-spl; + }; +}; + +&qspi_bk1_pins_a { + u-boot,dm-spl; + pins1 { + u-boot,dm-spl; + }; + pins2 { + u-boot,dm-spl; + }; +}; + +&rcc { + st,clksrc = < + CLK_MPU_PLL1P + CLK_AXI_PLL2P + CLK_MCU_PLL3P + CLK_PLL12_HSE + CLK_PLL3_HSE + CLK_PLL4_HSE + CLK_RTC_LSE + CLK_MCO1_DISABLED + CLK_MCO2_DISABLED + >; + + st,clkdiv = < + 1 /*MPU*/ + 0 /*AXI*/ + 0 /*MCU*/ + 1 /*APB1*/ + 1 /*APB2*/ + 1 /*APB3*/ + 1 /*APB4*/ + 2 /*APB5*/ + 23 /*RTC*/ + 0 /*MCO1*/ + 0 /*MCO2*/ + >; + + st,pkcs = < + CLK_CKPER_HSE + CLK_FMC_ACLK + CLK_QSPI_ACLK + CLK_ETH_DISABLED + CLK_SDMMC12_PLL4P + CLK_DSI_DSIPLL + CLK_STGEN_HSE + CLK_USBPHY_HSE + CLK_SPI2S1_PLL3Q + CLK_SPI2S23_PLL3Q + CLK_SPI45_HSI + CLK_SPI6_HSI + CLK_I2C46_HSI + CLK_SDMMC3_PLL4P + CLK_USBO_USBPHY + CLK_ADC_CKPER + CLK_CEC_LSE + CLK_I2C12_HSI + CLK_I2C35_HSI + CLK_UART1_HSI + CLK_UART24_HSI + CLK_UART35_HSI + CLK_UART6_HSI + CLK_UART78_HSI + CLK_SPDIF_PLL4P + CLK_FDCAN_PLL4R + CLK_SAI1_PLL3Q + CLK_SAI2_PLL3Q + CLK_SAI3_PLL3Q + CLK_SAI4_PLL3Q + CLK_RNG1_LSI + CLK_RNG2_LSI + CLK_LPTIM1_PCLK1 + CLK_LPTIM23_PCLK3 + CLK_LPTIM45_LSE + >; + + /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */ + pll2: st,pll@1 { + compatible = "st,stm32mp1-pll"; + reg = <1>; + cfg = < 2 65 1 0 0 PQR(1,1,1) >; + frac = < 0x1400 >; + u-boot,dm-pre-reloc; + }; + + /* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */ + pll3: st,pll@2 { + compatible = "st,stm32mp1-pll"; + reg = <2>; + cfg = < 1 33 1 16 36 PQR(1,1,1) >; + frac = < 0x1a04 >; + u-boot,dm-pre-reloc; + }; + + /* VCO = 600.0 MHz => P = 99, Q = 74, R = 99 */ + pll4: st,pll@3 { + compatible = "st,stm32mp1-pll"; + reg = <3>; + cfg = < 3 98 5 7 5 PQR(1,1,1) >; + u-boot,dm-pre-reloc; + }; +}; |