diff options
Diffstat (limited to 'roms/u-boot/arch/arm/include/asm/arch-armada100')
7 files changed, 497 insertions, 0 deletions
diff --git a/roms/u-boot/arch/arm/include/asm/arch-armada100/armada100.h b/roms/u-boot/arch/arm/include/asm/arch-armada100/armada100.h new file mode 100644 index 000000000..dd21ad3c6 --- /dev/null +++ b/roms/u-boot/arch/arm/include/asm/arch-armada100/armada100.h @@ -0,0 +1,59 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2010 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar <prafulla@marvell.com> + * Contributor: Mahavir Jain <mjain@marvell.com> + */ + +#ifndef _ASM_ARCH_ARMADA100_H +#define _ASM_ARCH_ARMADA100_H + +#if defined (CONFIG_ARMADA100) + +/* Common APB clock register bit definitions */ +#define APBC_APBCLK (1<<0) /* APB Bus Clock Enable */ +#define APBC_FNCLK (1<<1) /* Functional Clock Enable */ +#define APBC_RST (1<<2) /* Reset Generation */ +/* Functional Clock Selection Mask */ +#define APBC_FNCLKSEL(x) (((x) & 0xf) << 4) + +/* Fast Ethernet Controller Clock register definition */ +#define FE_CLK_RST 0x1 +#define FE_CLK_ENA 0x8 + +/* SSP2 Clock Control */ +#define SSP2_APBCLK 0x01 +#define SSP2_FNCLK 0x02 + +/* USB Clock/reset control bits */ +#define USB_SPH_AXICLK_EN 0x10 +#define USB_SPH_AXI_RST 0x02 + +/* MPMU Clocks */ +#define APB2_26M_EN (1 << 20) +#define AP_26M (1 << 4) + +/* Register Base Addresses */ +#define ARMD1_DRAM_BASE 0xB0000000 +#define ARMD1_FEC_BASE 0xC0800000 +#define ARMD1_TIMER_BASE 0xD4014000 +#define ARMD1_APBC1_BASE 0xD4015000 +#define ARMD1_APBC2_BASE 0xD4015800 +#define ARMD1_UART1_BASE 0xD4017000 +#define ARMD1_UART2_BASE 0xD4018000 +#define ARMD1_GPIO_BASE 0xD4019000 +#define ARMD1_SSP1_BASE 0xD401B000 +#define ARMD1_SSP2_BASE 0xD401C000 +#define ARMD1_MFPR_BASE 0xD401E000 +#define ARMD1_SSP3_BASE 0xD401F000 +#define ARMD1_SSP4_BASE 0xD4020000 +#define ARMD1_SSP5_BASE 0xD4021000 +#define ARMD1_UART3_BASE 0xD4026000 +#define ARMD1_MPMU_BASE 0xD4050000 +#define ARMD1_USB_HOST_BASE 0xD4209000 +#define ARMD1_APMU_BASE 0xD4282800 +#define ARMD1_CPU_BASE 0xD4282C00 + +#endif /* CONFIG_ARMADA100 */ +#endif /* _ASM_ARCH_ARMADA100_H */ diff --git a/roms/u-boot/arch/arm/include/asm/arch-armada100/config.h b/roms/u-boot/arch/arm/include/asm/arch-armada100/config.h new file mode 100644 index 000000000..2862dd072 --- /dev/null +++ b/roms/u-boot/arch/arm/include/asm/arch-armada100/config.h @@ -0,0 +1,27 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2011 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Lei Wen <leiwen@marvell.com> + */ + +/* + * This file should be included in board config header file. + * + * It supports common definitions for Armada100 platform + */ + +#ifndef _ARMD1_CONFIG_H +#define _ARMD1_CONFIG_H + +#include <asm/arch/armada100.h> + +#define CONFIG_SYS_TCLK (14745600) /* NS16550 clk config */ +#define CONFIG_SYS_HZ_CLOCK (3250000) /* Timer Freq. 3.25MHZ */ +#define CONFIG_MARVELL_MFP /* Enable mvmfp driver */ +#define MV_MFPR_BASE ARMD1_MFPR_BASE +#define MV_UART_CONSOLE_BASE ARMD1_UART1_BASE +#define CONFIG_SYS_NS16550_IER (1 << 6) /* Bit 6 in UART_IER register + represents UART Unit Enable */ + +#endif /* _ARMD1_CONFIG_H */ diff --git a/roms/u-boot/arch/arm/include/asm/arch-armada100/cpu.h b/roms/u-boot/arch/arm/include/asm/arch-armada100/cpu.h new file mode 100644 index 000000000..cd5e5051d --- /dev/null +++ b/roms/u-boot/arch/arm/include/asm/arch-armada100/cpu.h @@ -0,0 +1,161 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2010 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar <prafulla@marvell.com>, Contributor: Mahavir Jain <mjain@marvell.com> + */ + +#ifndef _ARMADA100CPU_H +#define _ARMADA100CPU_H + +#include <asm/io.h> +#include <asm/system.h> + +/* + * Main Power Management (MPMU) Registers + * Refer Datasheet Appendix A.8 + */ +struct armd1mpmu_registers { + u8 pad0[0x08 - 0x00]; + u32 fccr; /*0x0008*/ + u32 pocr; /*0x000c*/ + u32 posr; /*0x0010*/ + u32 succr; /*0x0014*/ + u8 pad1[0x030 - 0x014 - 4]; + u32 gpcr; /*0x0030*/ + u8 pad2[0x200 - 0x030 - 4]; + u32 wdtpcr; /*0x0200*/ + u8 pad3[0x1000 - 0x200 - 4]; + u32 apcr; /*0x1000*/ + u32 apsr; /*0x1004*/ + u8 pad4[0x1020 - 0x1004 - 4]; + u32 aprr; /*0x1020*/ + u32 acgr; /*0x1024*/ + u32 arsr; /*0x1028*/ +}; + +/* + * Application Subsystem Power Management + * Refer Datasheet Appendix A.9 + */ +struct armd1apmu_registers { + u32 pcr; /* 0x000 */ + u32 ccr; /* 0x004 */ + u32 pad1; + u32 ccsr; /* 0x00C */ + u32 fc_timer; /* 0x010 */ + u32 pad2; + u32 ideal_cfg; /* 0x018 */ + u8 pad3[0x04C - 0x018 - 4]; + u32 lcdcrc; /* 0x04C */ + u32 cciccrc; /* 0x050 */ + u32 sd1crc; /* 0x054 */ + u32 sd2crc; /* 0x058 */ + u32 usbcrc; /* 0x05C */ + u32 nfccrc; /* 0x060 */ + u32 dmacrc; /* 0x064 */ + u32 pad4; + u32 buscrc; /* 0x06C */ + u8 pad5[0x07C - 0x06C - 4]; + u32 wake_clr; /* 0x07C */ + u8 pad6[0x090 - 0x07C - 4]; + u32 core_status; /* 0x090 */ + u32 rfsc; /* 0x094 */ + u32 imr; /* 0x098 */ + u32 irwc; /* 0x09C */ + u32 isr; /* 0x0A0 */ + u8 pad7[0x0B0 - 0x0A0 - 4]; + u32 mhst; /* 0x0B0 */ + u32 msr; /* 0x0B4 */ + u8 pad8[0x0C0 - 0x0B4 - 4]; + u32 msst; /* 0x0C0 */ + u32 pllss; /* 0x0C4 */ + u32 smb; /* 0x0C8 */ + u32 gccrc; /* 0x0CC */ + u8 pad9[0x0D4 - 0x0CC - 4]; + u32 smccrc; /* 0x0D4 */ + u32 pad10; + u32 xdcrc; /* 0x0DC */ + u32 sd3crc; /* 0x0E0 */ + u32 sd4crc; /* 0x0E4 */ + u8 pad11[0x0F0 - 0x0E4 - 4]; + u32 cfcrc; /* 0x0F0 */ + u32 mspcrc; /* 0x0F4 */ + u32 cmucrc; /* 0x0F8 */ + u32 fecrc; /* 0x0FC */ + u32 pciecrc; /* 0x100 */ + u32 epdcrc; /* 0x104 */ +}; + +/* + * APB1 Clock Reset/Control Registers + * Refer Datasheet Appendix A.10 + */ +struct armd1apb1_registers { + u32 uart1; /*0x000*/ + u32 uart2; /*0x004*/ + u32 gpio; /*0x008*/ + u32 pwm1; /*0x00c*/ + u32 pwm2; /*0x010*/ + u32 pwm3; /*0x014*/ + u32 pwm4; /*0x018*/ + u8 pad0[0x028 - 0x018 - 4]; + u32 rtc; /*0x028*/ + u32 twsi0; /*0x02c*/ + u32 kpc; /*0x030*/ + u32 timers; /*0x034*/ + u8 pad1[0x03c - 0x034 - 4]; + u32 aib; /*0x03c*/ + u32 sw_jtag; /*0x040*/ + u32 timer1; /*0x044*/ + u32 onewire; /*0x048*/ + u8 pad2[0x050 - 0x048 - 4]; + u32 asfar; /*0x050 AIB Secure First Access Reg*/ + u32 assar; /*0x054 AIB Secure Second Access Reg*/ + u8 pad3[0x06c - 0x054 - 4]; + u32 twsi1; /*0x06c*/ + u32 uart3; /*0x070*/ + u8 pad4[0x07c - 0x070 - 4]; + u32 timer2; /*0x07C*/ + u8 pad5[0x084 - 0x07c - 4]; + u32 ac97; /*0x084*/ +}; + +/* +* APB2 Clock Reset/Control Registers +* Refer Datasheet Appendix A.11 +*/ +struct armd1apb2_registers { + u32 pad1[0x01C - 0x000]; + u32 ssp1_clkrst; /* 0x01C */ + u32 ssp2_clkrst; /* 0x020 */ + u32 pad2[0x04C - 0x020 - 4]; + u32 ssp3_clkrst; /* 0x04C */ + u32 pad3[0x058 - 0x04C - 4]; + u32 ssp4_clkrst; /* 0x058 */ + u32 ssp5_clkrst; /* 0x05C */ +}; + +/* + * CPU Interface Registers + * Refer Datasheet Appendix A.2 + */ +struct armd1cpu_registers { + u32 chip_id; /* Chip Id Reg */ + u32 pad; + u32 cpu_conf; /* CPU Conf Reg */ + u32 pad1; + u32 cpu_sram_spd; /* CPU SRAM Speed Reg */ + u32 pad2; + u32 cpu_l2c_spd; /* CPU L2cache Speed Conf */ + u32 mcb_conf; /* MCB Conf Reg */ + u32 sys_boot_ctl; /* Sytem Boot Control */ +}; + +/* + * Functions + */ +u32 armd1_sdram_base(int); +u32 armd1_sdram_size(int); + +#endif /* _ARMADA100CPU_H */ diff --git a/roms/u-boot/arch/arm/include/asm/arch-armada100/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-armada100/gpio.h new file mode 100644 index 000000000..b85f6a53d --- /dev/null +++ b/roms/u-boot/arch/arm/include/asm/arch-armada100/gpio.h @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2011 + * eInfochips Ltd. <www.einfochips.com> + * Written-by: Ajay Bhargav <contact@8051projects.net> + * + * (C) Copyright 2010 + * Marvell Semiconductor <www.marvell.com> + */ + +#ifndef _ASM_ARCH_GPIO_H +#define _ASM_ARCH_GPIO_H + +#include <asm/types.h> +#include <asm/arch/armada100.h> + +#define GPIO_HIGH 1 +#define GPIO_LOW 0 + +#define GPIO_TO_REG(gp) (gp >> 5) +#define GPIO_TO_BIT(gp) (1 << (gp & 0x1F)) +#define GPIO_VAL(gp, val) ((val >> (gp & 0x1F)) & 0x01) + +static inline void *get_gpio_base(int bank) +{ + const unsigned int offset[4] = {0, 4, 8, 0x100}; + /* gpio register bank offset - refer Appendix A.36 */ + return (struct gpio_reg *)(ARMD1_GPIO_BASE + offset[bank]); +} + +#endif /* _ASM_ARCH_GPIO_H */ diff --git a/roms/u-boot/arch/arm/include/asm/arch-armada100/mfp.h b/roms/u-boot/arch/arm/include/asm/arch-armada100/mfp.h new file mode 100644 index 000000000..a808ee857 --- /dev/null +++ b/roms/u-boot/arch/arm/include/asm/arch-armada100/mfp.h @@ -0,0 +1,79 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Based on linux/arch/arm/mach-mpp/include/mfp-pxa168.h + * (C) Copyright 2007 + * Marvell Semiconductor <www.marvell.com> + * 2007-08-21: eric miao <eric.miao@marvell.com> + * + * (C) Copyright 2010 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar <prafulla@marvell.com> + * Contributor: Mahavir Jain <mjain@marvell.com> + */ + +#ifndef __ARMADA100_MFP_H +#define __ARMADA100_MFP_H + +/* + * Frequently used MFP Configuration macros for all ARMADA100 family of SoCs + * + * offset, pull,pF, drv,dF, edge,eF ,afn,aF + */ +/* UART1 */ +#define MFP107_UART1_TXD (MFP_REG(0x01ac) | MFP_AF1 | MFP_DRIVE_FAST) +#define MFP107_UART1_RXD (MFP_REG(0x01ac) | MFP_AF2 | MFP_DRIVE_FAST) +#define MFP108_UART1_RXD (MFP_REG(0x01b0) | MFP_AF1 | MFP_DRIVE_FAST) +#define MFP108_UART1_TXD (MFP_REG(0x01b0) | MFP_AF2 | MFP_DRIVE_FAST) +#define MFP109_UART1_CTS (MFP_REG(0x01b4) | MFP_AF1 | MFP_DRIVE_MEDIUM) +#define MFP109_UART1_RTS (MFP_REG(0x01b4) | MFP_AF2 | MFP_DRIVE_MEDIUM) +#define MFP110_UART1_RTS (MFP_REG(0x01b8) | MFP_AF1 | MFP_DRIVE_MEDIUM) +#define MFP110_UART1_CTS (MFP_REG(0x01b8) | MFP_AF2 | MFP_DRIVE_MEDIUM) +#define MFP111_UART1_RI (MFP_REG(0x01bc) | MFP_AF1 | MFP_DRIVE_MEDIUM) +#define MFP111_UART1_DSR (MFP_REG(0x01bc) | MFP_AF2 | MFP_DRIVE_MEDIUM) +#define MFP112_UART1_DTR (MFP_REG(0x01c0) | MFP_AF1 | MFP_DRIVE_MEDIUM) +#define MFP112_UART1_DCD (MFP_REG(0x01c0) | MFP_AF2 | MFP_DRIVE_MEDIUM) + +/* UART2 */ +#define MFP47_UART2_RXD (MFP_REG(0x0028) | MFP_AF6 | MFP_DRIVE_MEDIUM) +#define MFP48_UART2_TXD (MFP_REG(0x002c) | MFP_AF6 | MFP_DRIVE_MEDIUM) +#define MFP88_UART2_RXD (MFP_REG(0x0160) | MFP_AF2 | MFP_DRIVE_MEDIUM) +#define MFP89_UART2_TXD (MFP_REG(0x0164) | MFP_AF2 | MFP_DRIVE_MEDIUM) + +/* UART3 */ +#define MFPO8_UART3_TXD (MFP_REG(0x06c) | MFP_AF2 | MFP_DRIVE_MEDIUM) +#define MFPO9_UART3_RXD (MFP_REG(0x070) | MFP_AF2 | MFP_DRIVE_MEDIUM) + +/* I2c */ +#define MFP105_CI2C_SDA (MFP_REG(0x1a4) | MFP_AF1 | MFP_DRIVE_MEDIUM) +#define MFP106_CI2C_SCL (MFP_REG(0x1a8) | MFP_AF1 | MFP_DRIVE_MEDIUM) + +/* Fast Ethernet */ +#define MFP086_ETH_TXCLK (MFP_REG(0x158) | MFP_AF5 | MFP_DRIVE_MEDIUM) +#define MFP087_ETH_TXEN (MFP_REG(0x15C) | MFP_AF5 | MFP_DRIVE_MEDIUM) +#define MFP088_ETH_TXDQ3 (MFP_REG(0x160) | MFP_AF5 | MFP_DRIVE_MEDIUM) +#define MFP089_ETH_TXDQ2 (MFP_REG(0x164) | MFP_AF5 | MFP_DRIVE_MEDIUM) +#define MFP090_ETH_TXDQ1 (MFP_REG(0x168) | MFP_AF5 | MFP_DRIVE_MEDIUM) +#define MFP091_ETH_TXDQ0 (MFP_REG(0x16C) | MFP_AF5 | MFP_DRIVE_MEDIUM) +#define MFP092_ETH_CRS (MFP_REG(0x170) | MFP_AF5 | MFP_DRIVE_MEDIUM) +#define MFP093_ETH_COL (MFP_REG(0x174) | MFP_AF5 | MFP_DRIVE_MEDIUM) +#define MFP094_ETH_RXCLK (MFP_REG(0x178) | MFP_AF5 | MFP_DRIVE_MEDIUM) +#define MFP095_ETH_RXER (MFP_REG(0x17C) | MFP_AF5 | MFP_DRIVE_MEDIUM) +#define MFP096_ETH_RXDQ3 (MFP_REG(0x180) | MFP_AF5 | MFP_DRIVE_MEDIUM) +#define MFP097_ETH_RXDQ2 (MFP_REG(0x184) | MFP_AF5 | MFP_DRIVE_MEDIUM) +#define MFP098_ETH_RXDQ1 (MFP_REG(0x188) | MFP_AF5 | MFP_DRIVE_MEDIUM) +#define MFP099_ETH_RXDQ0 (MFP_REG(0x18C) | MFP_AF5 | MFP_DRIVE_MEDIUM) +#define MFP100_ETH_MDC (MFP_REG(0x190) | MFP_AF5 | MFP_DRIVE_MEDIUM) +#define MFP101_ETH_MDIO (MFP_REG(0x194) | MFP_AF5 | MFP_DRIVE_MEDIUM) +#define MFP103_ETH_RXDV (MFP_REG(0x19C) | MFP_AF5 | MFP_DRIVE_MEDIUM) + +/* SPI */ +#define MFP107_SSP2_RXD (MFP_REG(0x1AC) | MFP_AF4 | MFP_DRIVE_MEDIUM) +#define MFP108_SSP2_TXD (MFP_REG(0x1B0) | MFP_AF4 | MFP_DRIVE_MEDIUM) +#define MFP110_SSP2_CS (MFP_REG(0x1B8) | MFP_AF0 | MFP_DRIVE_MEDIUM) +#define MFP111_SSP2_CLK (MFP_REG(0x1BC) | MFP_AF4 | MFP_DRIVE_MEDIUM) + +/* More macros can be defined here... */ + +#define MFP_PIN_MAX 117 + +#endif /* __ARMADA100_MFP_H */ diff --git a/roms/u-boot/arch/arm/include/asm/arch-armada100/spi.h b/roms/u-boot/arch/arm/include/asm/arch-armada100/spi.h new file mode 100644 index 000000000..873ba6e91 --- /dev/null +++ b/roms/u-boot/arch/arm/include/asm/arch-armada100/spi.h @@ -0,0 +1,78 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2011 + * eInfochips Ltd. <www.einfochips.com> + * Written-by: Ajay Bhargav <contact@8051projects.net> + * + * (C) Copyright 2010 + * Marvell Semiconductor <www.marvell.com> + */ + +#ifndef __ARMADA100_SPI_H_ +#define __ARMADA100_SPI_H_ + +#include <asm/arch/armada100.h> + +#define CAT_BASE_ADDR(x) ARMD1_SSP ## x ## _BASE +#define SSP_REG_BASE(x) CAT_BASE_ADDR(x) + +/* + * SSP Serial Port Registers + * refer Appendix A.26 + */ +struct ssp_reg { + u32 sscr0; /* SSP Control Register 0 - 0x000 */ + u32 sscr1; /* SSP Control Register 1 - 0x004 */ + u32 sssr; /* SSP Status Register - 0x008 */ + u32 ssitr; /* SSP Interrupt Test Register - 0x00C */ + u32 ssdr; /* SSP Data Register - 0x010 */ + u32 pad1[5]; + u32 ssto; /* SSP Timeout Register - 0x028 */ + u32 sspsp; /* SSP Programmable Serial Protocol Register - 0x02C */ + u32 sstsa; /* SSP TX Timeslot Active Register - 0x030 */ + u32 ssrsa; /* SSP RX Timeslot Active Register - 0x034 */ + u32 sstss; /* SSP Timeslot Status Register - 0x038 */ +}; + +#define DEFAULT_WORD_LEN 8 +#define SSP_FLUSH_NUM 0x2000 +#define RX_THRESH_DEF 8 +#define TX_THRESH_DEF 8 +#define TIMEOUT_DEF 1000 + +#define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */ +#define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */ +#define SSCR1_LBM (1 << 2) /* Loop-Back Mode */ +#define SSCR1_SPO (1 << 3) /* Motorola SPI SSPSCLK polarity + setting */ +#define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */ +#define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */ +#define SSCR1_TFT 0x03c0 /* Transmit FIFO Threshold (mask) */ +#define SSCR1_RFT 0x3c00 /* Receive FIFO Threshold (mask) */ + +#define SSCR1_TXTRESH(x) ((x - 1) << 6) /* level [1..16] */ +#define SSCR1_RXTRESH(x) ((x - 1) << 10) /* level [1..16] */ +#define SSCR1_TINTE (1 << 19) /* Receiver Time-out + Interrupt enable */ + +#define SSCR0_DSS 0x0f /* Data Size Select (mask) */ +#define SSCR0_DATASIZE(x) (x - 1) /* Data Size Select [4..16] */ +#define SSCR0_FRF 0x30 /* FRame Format (mask) */ +#define SSCR0_MOTO (0x0 << 4) /* Motorola's Serial + Peripheral Interface */ +#define SSCR0_TI (0x1 << 4) /* TI's Synchronous + Serial Protocol (SSP) */ +#define SSCR0_NATIONAL (0x2 << 4) /* National Microwire */ +#define SSCR0_ECS (1 << 6) /* External clock select */ +#define SSCR0_SSE (1 << 7) /* Synchronous Serial Port + Enable */ + +#define SSSR_TNF (1 << 2) /* Transmit FIFO Not Full */ +#define SSSR_RNE (1 << 3) /* Receive FIFO Not Empty */ +#define SSSR_BSY (1 << 4) /* SSP Busy */ +#define SSSR_TFS (1 << 5) /* Transmit FIFO Service Request */ +#define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */ +#define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */ +#define SSSR_TINT (1 << 19) /* Receiver Time-out Interrupt */ + +#endif /* __ARMADA100_SPI_H_ */ diff --git a/roms/u-boot/arch/arm/include/asm/arch-armada100/utmi-armada100.h b/roms/u-boot/arch/arm/include/asm/arch-armada100/utmi-armada100.h new file mode 100644 index 000000000..28147f42a --- /dev/null +++ b/roms/u-boot/arch/arm/include/asm/arch-armada100/utmi-armada100.h @@ -0,0 +1,62 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2012 + * eInfochips Ltd. <www.einfochips.com> + * Written-by: Ajay Bhargav <contact@8051projects.net> + * + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + */ + +#ifndef __UTMI_ARMADA100__ +#define __UTMI_ARMADA100__ + +#define UTMI_PHY_BASE 0xD4206000 + +/* utmi_ctrl - bits */ +#define INPKT_DELAY_SOF (1 << 28) +#define PLL_PWR_UP 2 +#define PHY_PWR_UP 1 + +/* utmi_pll - bits */ +#define PLL_FBDIV_MASK 0x00000FF0 +#define PLL_FBDIV 4 +#define PLL_REFDIV_MASK 0x0000000F +#define PLL_REFDIV 0 +#define PLL_READY 0x800000 +#define VCOCAL_START (1 << 21) + +#define N_DIVIDER 0xEE +#define M_DIVIDER 0x0B + +/* utmi_tx - bits */ +#define CK60_PHSEL 17 +#define PHSEL_VAL 0x4 +#define RCAL_START (1 << 12) + +/* + * USB PHY registers + * Refer Datasheet Appendix A.21 + */ +struct armd1usb_phy_reg { + u32 utmi_rev; /* USB PHY Revision */ + u32 utmi_ctrl; /* USB PHY Control register */ + u32 utmi_pll; /* PLL register */ + u32 utmi_tx; /* Tx register */ + u32 utmi_rx; /* Rx register */ + u32 utmi_ivref; /* IVREF register */ + u32 utmi_tst_g0; /* Test group 0 register */ + u32 utmi_tst_g1; /* Test group 1 register */ + u32 utmi_tst_g2; /* Test group 2 register */ + u32 utmi_tst_g3; /* Test group 3 register */ + u32 utmi_tst_g4; /* Test group 4 register */ + u32 utmi_tst_g5; /* Test group 5 register */ + u32 utmi_reserve; /* Reserve Register */ + u32 utmi_usb_int; /* USB interuppt register */ + u32 utmi_dbg_ctl; /* Debug control register */ + u32 utmi_otg_addon; /* OTG addon register */ +}; + +int utmi_init(void); + +#endif /* __UTMI_ARMADA100__ */ |