diff options
Diffstat (limited to 'roms/u-boot/arch/arm/include/asm/arch-omap3/omap.h')
| -rw-r--r-- | roms/u-boot/arch/arm/include/asm/arch-omap3/omap.h | 284 |
1 files changed, 284 insertions, 0 deletions
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap3/omap.h b/roms/u-boot/arch/arm/include/asm/arch-omap3/omap.h new file mode 100644 index 000000000..19155a280 --- /dev/null +++ b/roms/u-boot/arch/arm/include/asm/arch-omap3/omap.h @@ -0,0 +1,284 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2006-2008 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <x0khasim@ti.com> + */ + +#ifndef _OMAP3_H_ +#define _OMAP3_H_ + +#include <linux/sizes.h> + +/* Stuff on L3 Interconnect */ +#define SMX_APE_BASE 0x68000000 + +/* GPMC */ +#define OMAP34XX_GPMC_BASE 0x6E000000 + +/* SMS */ +#define OMAP34XX_SMS_BASE 0x6C000000 + +/* SDRC */ +#define OMAP34XX_SDRC_BASE 0x6D000000 + +/* + * L4 Peripherals - L4 Wakeup and L4 Core now + */ +#define OMAP34XX_CORE_L4_IO_BASE 0x48000000 +#define OMAP34XX_WAKEUP_L4_IO_BASE 0x48300000 +#define OMAP34XX_ID_L4_IO_BASE 0x4830A200 +#define OMAP34XX_L4_PER 0x49000000 +#define OMAP34XX_L4_IO_BASE OMAP34XX_CORE_L4_IO_BASE + +/* DMA4/SDMA */ +#define OMAP34XX_DMA4_BASE 0x48056000 + +/* CONTROL */ +#define OMAP34XX_CTRL_BASE (OMAP34XX_L4_IO_BASE + 0x2000) + +#ifndef __ASSEMBLY__ +/* Signal Integrity Parameter Control Registers */ +struct control_prog_io { + unsigned char res[0x408]; + unsigned int io2; /* 0x408 */ + unsigned char res2[0x38]; + unsigned int io0; /* 0x444 */ + unsigned int io1; /* 0x448 */ +}; +#endif /* __ASSEMBLY__ */ + +/* Bit definition for CONTROL_PROG_IO1 */ +#define PRG_I2C2_PULLUPRESX 0x00000001 + +/* Scratchpad memory */ +#define OMAP34XX_SCRATCHPAD (OMAP34XX_CTRL_BASE + 0x910) + +/* UART */ +#define OMAP34XX_UART1 (OMAP34XX_L4_IO_BASE + 0x6a000) +#define OMAP34XX_UART2 (OMAP34XX_L4_IO_BASE + 0x6c000) +#define OMAP34XX_UART3 (OMAP34XX_L4_PER + 0x20000) +#define OMAP34XX_UART4 (OMAP34XX_L4_PER + 0x42000) + +/* General Purpose Timers */ +#define OMAP34XX_GPT1 0x48318000 +#define OMAP34XX_GPT2 0x49032000 +#define OMAP34XX_GPT3 0x49034000 +#define OMAP34XX_GPT4 0x49036000 +#define OMAP34XX_GPT5 0x49038000 +#define OMAP34XX_GPT6 0x4903A000 +#define OMAP34XX_GPT7 0x4903C000 +#define OMAP34XX_GPT8 0x4903E000 +#define OMAP34XX_GPT9 0x49040000 +#define OMAP34XX_GPT10 0x48086000 +#define OMAP34XX_GPT11 0x48088000 +#define OMAP34XX_GPT12 0x48304000 + +/* WatchDog Timers (1 secure, 3 GP) */ +#define WD1_BASE 0x4830C000 +#define WD2_BASE 0x48314000 +#define WD3_BASE 0x49030000 + +/* 32KTIMER */ +#define SYNC_32KTIMER_BASE 0x48320000 + +#ifndef __ASSEMBLY__ + +struct s32ktimer { + unsigned char res[0x10]; + unsigned int s32k_cr; /* 0x10 */ +}; + +#define DEVICE_TYPE_SHIFT 0x8 +#define DEVICE_TYPE_MASK (0x7 << DEVICE_TYPE_SHIFT) + +#endif /* __ASSEMBLY__ */ + +#ifndef __ASSEMBLY__ +struct gpio { + unsigned char res1[0x34]; + unsigned int oe; /* 0x34 */ + unsigned int datain; /* 0x38 */ + unsigned char res2[0x54]; + unsigned int cleardataout; /* 0x90 */ + unsigned int setdataout; /* 0x94 */ +}; +#endif /* __ASSEMBLY__ */ + +#define GPIO0 (0x1 << 0) +#define GPIO1 (0x1 << 1) +#define GPIO2 (0x1 << 2) +#define GPIO3 (0x1 << 3) +#define GPIO4 (0x1 << 4) +#define GPIO5 (0x1 << 5) +#define GPIO6 (0x1 << 6) +#define GPIO7 (0x1 << 7) +#define GPIO8 (0x1 << 8) +#define GPIO9 (0x1 << 9) +#define GPIO10 (0x1 << 10) +#define GPIO11 (0x1 << 11) +#define GPIO12 (0x1 << 12) +#define GPIO13 (0x1 << 13) +#define GPIO14 (0x1 << 14) +#define GPIO15 (0x1 << 15) +#define GPIO16 (0x1 << 16) +#define GPIO17 (0x1 << 17) +#define GPIO18 (0x1 << 18) +#define GPIO19 (0x1 << 19) +#define GPIO20 (0x1 << 20) +#define GPIO21 (0x1 << 21) +#define GPIO22 (0x1 << 22) +#define GPIO23 (0x1 << 23) +#define GPIO24 (0x1 << 24) +#define GPIO25 (0x1 << 25) +#define GPIO26 (0x1 << 26) +#define GPIO27 (0x1 << 27) +#define GPIO28 (0x1 << 28) +#define GPIO29 (0x1 << 29) +#define GPIO30 (0x1 << 30) +#define GPIO31 (0x1 << 31) + +/* base address for indirect vectors (internal boot mode) */ +#define SRAM_OFFSET0 0x40000000 +#define SRAM_OFFSET1 0x00200000 +#define SRAM_OFFSET2 0x0000F800 +#define SRAM_VECT_CODE (SRAM_OFFSET0 | SRAM_OFFSET1 | \ + SRAM_OFFSET2) +#define SRAM_CLK_CODE (SRAM_VECT_CODE + 64) + +#define NON_SECURE_SRAM_START 0x40208000 /* Works for GP & EMU */ +#define NON_SECURE_SRAM_END 0x40210000 +#define NON_SECURE_SRAM_IMG_END 0x4020F000 +#define SRAM_SCRATCH_SPACE_ADDR (NON_SECURE_SRAM_IMG_END - SZ_1K) + +#define LOW_LEVEL_SRAM_STACK 0x4020FFFC + +/* scratch area - accessible on both EMU and GP */ +#define OMAP3_PUBLIC_SRAM_SCRATCH_AREA NON_SECURE_SRAM_START + +#define DEBUG_LED1 149 /* gpio */ +#define DEBUG_LED2 150 /* gpio */ + +#define XDR_POP 5 /* package on package part */ +#define SDR_DISCRETE 4 /* 128M memory SDR module */ +#define DDR_STACKED 3 /* stacked part on 2422 */ +#define DDR_COMBO 2 /* combo part on cpu daughter card */ +#define DDR_DISCRETE 1 /* 2x16 parts on daughter card */ + +#define DDR_100 100 /* type found on most mem d-boards */ +#define DDR_111 111 /* some combo parts */ +#define DDR_133 133 /* most combo, some mem d-boards */ +#define DDR_165 165 /* future parts */ + +#define CPU_3430 0x3430 + +/* + * 343x real hardware: + * ES1 = rev 0 + * + * ES2 onwards, the value maps to contents of IDCODE register [31:28]. + * + * Note : CPU_3XX_ES20 is used in cache.S. Please review before changing. + */ +#define CPU_3XX_ES10 0 +#define CPU_3XX_ES20 1 +#define CPU_3XX_ES21 2 +#define CPU_3XX_ES30 3 +#define CPU_3XX_ES31 4 +#define CPU_3XX_ES312 7 +#define CPU_3XX_MAX_REV 8 + +/* + * 37xx real hardware: + * ES1.0 onwards, the value maps to contents of IDCODE register [31:28]. + */ + +#define CPU_37XX_ES10 0 +#define CPU_37XX_ES11 1 +#define CPU_37XX_ES12 2 +#define CPU_37XX_MAX_REV 3 + +#define CPU_3XX_ID_SHIFT 28 + +#define WIDTH_8BIT 0x0000 +#define WIDTH_16BIT 0x1000 /* bit pos for 16 bit in gpmc */ + +/* + * Hawkeye values + */ +#define HAWKEYE_OMAP34XX 0xb7ae +#define HAWKEYE_AM35XX 0xb868 +#define HAWKEYE_OMAP36XX 0xb891 + +#define HAWKEYE_SHIFT 12 + +/* + * Define CPU families + */ +#define CPU_OMAP34XX 0x3400 /* OMAP34xx/OMAP35 devices */ +#define CPU_AM35XX 0x3500 /* AM35xx devices */ +#define CPU_OMAP36XX 0x3600 /* OMAP36xx devices */ + +/* + * Control status register values corresponding to cpu variants + */ +#define OMAP3503 0x5c00 +#define OMAP3515 0x1c00 +#define OMAP3525 0x4c00 +#define OMAP3530 0x0c00 + +#define AM3505 0x5c00 +#define AM3517 0x1c00 + +#define OMAP3730 0x0c00 +#define OMAP3725 0x4c00 +#define AM3715 0x1c00 +#define AM3703 0x5c00 + +#define OMAP3730_1GHZ 0x0e00 +#define OMAP3725_1GHZ 0x4e00 +#define AM3715_1GHZ 0x1e00 +#define AM3703_1GHZ 0x5e00 + +/* + * ROM code API related flags + */ +#define OMAP3_GP_ROMCODE_API_L2_INVAL 1 +#define OMAP3_GP_ROMCODE_API_WRITE_L2ACR 2 +#define OMAP3_GP_ROMCODE_API_WRITE_ACR 3 + +/* + * EMU device PPA HAL related flags + */ +#define OMAP3_EMU_HAL_API_L2_INVAL 40 +#define OMAP3_EMU_HAL_API_WRITE_ACR 42 + +#define OMAP3_EMU_HAL_START_HAL_CRITICAL 4 + +/* ABB settings */ +#define OMAP_ABB_SETTLING_TIME 30 +#define OMAP_ABB_CLOCK_CYCLES 8 + +/* ABB tranxdone mask */ +#define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 26) + +#define OMAP_REBOOT_REASON_OFFSET 0x04 + +/* Boot parameters */ +#ifndef __ASSEMBLY__ +struct omap_boot_parameters { + unsigned int boot_message; + unsigned char boot_device; + unsigned char reserved; + unsigned char reset_reason; + unsigned char ch_flags; + unsigned int boot_device_descriptor; +}; + +int omap_reboot_mode(char *mode, unsigned int length); +int omap_reboot_mode_clear(void); +int omap_reboot_mode_store(char *mode); +#endif + +#endif |