diff options
Diffstat (limited to 'roms/u-boot/arch/arm/include/asm/arch-omap4')
| -rw-r--r-- | roms/u-boot/arch/arm/include/asm/arch-omap4/clock.h | 251 | ||||
| -rw-r--r-- | roms/u-boot/arch/arm/include/asm/arch-omap4/cpu.h | 109 | ||||
| -rw-r--r-- | roms/u-boot/arch/arm/include/asm/arch-omap4/ehci.h | 38 | ||||
| -rw-r--r-- | roms/u-boot/arch/arm/include/asm/arch-omap4/gpio.h | 34 | ||||
| -rw-r--r-- | roms/u-boot/arch/arm/include/asm/arch-omap4/hardware.h | 25 | ||||
| -rw-r--r-- | roms/u-boot/arch/arm/include/asm/arch-omap4/i2c.h | 11 | ||||
| -rw-r--r-- | roms/u-boot/arch/arm/include/asm/arch-omap4/mem.h | 61 | ||||
| -rw-r--r-- | roms/u-boot/arch/arm/include/asm/arch-omap4/mmc_host_def.h | 38 | ||||
| -rw-r--r-- | roms/u-boot/arch/arm/include/asm/arch-omap4/mux_omap4.h | 328 | ||||
| -rw-r--r-- | roms/u-boot/arch/arm/include/asm/arch-omap4/omap.h | 143 | ||||
| -rw-r--r-- | roms/u-boot/arch/arm/include/asm/arch-omap4/spl.h | 22 | ||||
| -rw-r--r-- | roms/u-boot/arch/arm/include/asm/arch-omap4/sys_proto.h | 71 |
12 files changed, 1131 insertions, 0 deletions
diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap4/clock.h b/roms/u-boot/arch/arm/include/asm/arch-omap4/clock.h new file mode 100644 index 000000000..0a626fe64 --- /dev/null +++ b/roms/u-boot/arch/arm/include/asm/arch-omap4/clock.h @@ -0,0 +1,251 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Aneesh V <aneesh@ti.com> + */ +#ifndef _CLOCKS_OMAP4_H_ +#define _CLOCKS_OMAP4_H_ +#include <asm/omap_common.h> + +/* + * Assuming a maximum of 1.5 GHz ARM speed and a minimum of 2 cycles per + * loop, allow for a minimum of 2 ms wait (in reality the wait will be + * much more than that) + */ +#define LDELAY 1000000 + +/* CM_DLL_CTRL */ +#define CM_DLL_CTRL_OVERRIDE_SHIFT 0 +#define CM_DLL_CTRL_OVERRIDE_MASK (1 << 0) +#define CM_DLL_CTRL_NO_OVERRIDE 0 + +/* CM_CLKMODE_DPLL */ +#define CM_CLKMODE_DPLL_REGM4XEN_SHIFT 11 +#define CM_CLKMODE_DPLL_REGM4XEN_MASK (1 << 11) +#define CM_CLKMODE_DPLL_LPMODE_EN_SHIFT 10 +#define CM_CLKMODE_DPLL_LPMODE_EN_MASK (1 << 10) +#define CM_CLKMODE_DPLL_RELOCK_RAMP_EN_SHIFT 9 +#define CM_CLKMODE_DPLL_RELOCK_RAMP_EN_MASK (1 << 9) +#define CM_CLKMODE_DPLL_DRIFTGUARD_EN_SHIFT 8 +#define CM_CLKMODE_DPLL_DRIFTGUARD_EN_MASK (1 << 8) +#define CM_CLKMODE_DPLL_RAMP_RATE_SHIFT 5 +#define CM_CLKMODE_DPLL_RAMP_RATE_MASK (0x7 << 5) +#define CM_CLKMODE_DPLL_EN_SHIFT 0 +#define CM_CLKMODE_DPLL_EN_MASK (0x7 << 0) + +#define CM_CLKMODE_DPLL_DPLL_EN_SHIFT 0 +#define CM_CLKMODE_DPLL_DPLL_EN_MASK 7 + +#define DPLL_EN_STOP 1 +#define DPLL_EN_MN_BYPASS 4 +#define DPLL_EN_LOW_POWER_BYPASS 5 +#define DPLL_EN_FAST_RELOCK_BYPASS 6 +#define DPLL_EN_LOCK 7 + +/* CM_IDLEST_DPLL fields */ +#define ST_DPLL_CLK_MASK 1 + +/* CM_CLKSEL_DPLL */ +#define CM_CLKSEL_DPLL_DPLL_SD_DIV_SHIFT 24 +#define CM_CLKSEL_DPLL_DPLL_SD_DIV_MASK (0xFF << 24) +#define CM_CLKSEL_DPLL_M_SHIFT 8 +#define CM_CLKSEL_DPLL_M_MASK (0x7FF << 8) +#define CM_CLKSEL_DPLL_N_SHIFT 0 +#define CM_CLKSEL_DPLL_N_MASK 0x7F +#define CM_CLKSEL_DCC_EN_SHIFT 22 +#define CM_CLKSEL_DCC_EN_MASK (1 << 22) + +/* CM_SYS_CLKSEL */ +#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK 7 + +/* CM_CLKSEL_CORE */ +#define CLKSEL_CORE_SHIFT 0 +#define CLKSEL_L3_SHIFT 4 +#define CLKSEL_L4_SHIFT 8 + +#define CLKSEL_CORE_X2_DIV_1 0 +#define CLKSEL_L3_CORE_DIV_2 1 +#define CLKSEL_L4_L3_DIV_2 1 + +/* CM_ABE_PLL_REF_CLKSEL */ +#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_SHIFT 0 +#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_MASK 1 +#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK 0 +#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK 1 + +/* CM_BYPCLK_DPLL_IVA */ +#define CM_BYPCLK_DPLL_IVA_CLKSEL_SHIFT 0 +#define CM_BYPCLK_DPLL_IVA_CLKSEL_MASK 3 + +#define DPLL_IVA_CLKSEL_CORE_X2_DIV_2 1 + +/* CM_SHADOW_FREQ_CONFIG1 */ +#define SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK 1 +#define SHADOW_FREQ_CONFIG1_DLL_OVERRIDE_MASK 4 +#define SHADOW_FREQ_CONFIG1_DLL_RESET_MASK 8 + +#define SHADOW_FREQ_CONFIG1_DPLL_EN_SHIFT 8 +#define SHADOW_FREQ_CONFIG1_DPLL_EN_MASK (7 << 8) + +#define SHADOW_FREQ_CONFIG1_M2_DIV_SHIFT 11 +#define SHADOW_FREQ_CONFIG1_M2_DIV_MASK (0x1F << 11) + +/*CM_<clock_domain>__CLKCTRL */ +#define CD_CLKCTRL_CLKTRCTRL_SHIFT 0 +#define CD_CLKCTRL_CLKTRCTRL_MASK 3 + +#define CD_CLKCTRL_CLKTRCTRL_NO_SLEEP 0 +#define CD_CLKCTRL_CLKTRCTRL_SW_SLEEP 1 +#define CD_CLKCTRL_CLKTRCTRL_SW_WKUP 2 +#define CD_CLKCTRL_CLKTRCTRL_HW_AUTO 3 + + +/* CM_<clock_domain>_<module>_CLKCTRL */ +#define MODULE_CLKCTRL_MODULEMODE_SHIFT 0 +#define MODULE_CLKCTRL_MODULEMODE_MASK 3 +#define MODULE_CLKCTRL_IDLEST_SHIFT 16 +#define MODULE_CLKCTRL_IDLEST_MASK (3 << 16) + +#define MODULE_CLKCTRL_MODULEMODE_SW_DISABLE 0 +#define MODULE_CLKCTRL_MODULEMODE_HW_AUTO 1 +#define MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN 2 + +#define MODULE_CLKCTRL_IDLEST_FULLY_FUNCTIONAL 0 +#define MODULE_CLKCTRL_IDLEST_TRANSITIONING 1 +#define MODULE_CLKCTRL_IDLEST_IDLE 2 +#define MODULE_CLKCTRL_IDLEST_DISABLED 3 + +/* CM_L4PER_GPIO4_CLKCTRL */ +#define GPIO4_CLKCTRL_OPTFCLKEN_MASK (1 << 8) + +/* CM_L3INIT_HSMMCn_CLKCTRL */ +#define HSMMC_CLKCTRL_CLKSEL_MASK (1 << 24) + +/* CM_WKUP_GPTIMER1_CLKCTRL */ +#define GPTIMER1_CLKCTRL_CLKSEL_MASK (1 << 24) + +/* CM_CAM_ISS_CLKCTRL */ +#define ISS_CLKCTRL_OPTFCLKEN_MASK (1 << 8) + +/* CM_DSS_DSS_CLKCTRL */ +#define DSS_CLKCTRL_OPTFCLKEN_MASK 0xF00 + +/* CM_COREAON_USB_PHY_CORE_CLKCTRL */ +#define USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K (1 << 8) + +/* CM_L3INIT_USBPHY_CLKCTRL */ +#define USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK (1 << 8) + +/* CM_MPU_MPU_CLKCTRL */ +#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_SHIFT 24 +#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK (1 << 24) +#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_SHIFT 25 +#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK (1 << 25) + +/* Clock frequencies */ +#define OMAP_SYS_CLK_IND_38_4_MHZ 6 + +/* PRM_VC_VAL_BYPASS */ +#define PRM_VC_I2C_CHANNEL_FREQ_KHZ 400 + +/* PMIC */ +#define SMPS_I2C_SLAVE_ADDR 0x12 +/* TWL6030 SMPS */ +#define SMPS_REG_ADDR_VCORE1 0x55 +#define SMPS_REG_ADDR_VCORE2 0x5B +#define SMPS_REG_ADDR_VCORE3 0x61 +/* TWL6032 SMPS */ +#define SMPS_REG_ADDR_SMPS1 0x55 +#define SMPS_REG_ADDR_SMPS2 0x5B +#define SMPS_REG_ADDR_SMPS5 0x49 + +#define PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV 607700 +#define PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV 709000 + +/* TPS */ +#define TPS62361_I2C_SLAVE_ADDR 0x60 +#define TPS62361_REG_ADDR_SET0 0x0 +#define TPS62361_REG_ADDR_SET1 0x1 +#define TPS62361_REG_ADDR_SET2 0x2 +#define TPS62361_REG_ADDR_SET3 0x3 +#define TPS62361_REG_ADDR_CTRL 0x4 +#define TPS62361_REG_ADDR_TEMP 0x5 +#define TPS62361_REG_ADDR_RMP_CTRL 0x6 +#define TPS62361_REG_ADDR_CHIP_ID 0x8 +#define TPS62361_REG_ADDR_CHIP_ID_2 0x9 + +#define TPS62361_BASE_VOLT_MV 500 +#define TPS62361_VSEL0_GPIO 7 + +/* AUXCLKx reg fields */ +#define AUXCLK_ENABLE_MASK (1 << 8) +#define AUXCLK_SRCSELECT_SHIFT 1 +#define AUXCLK_SRCSELECT_MASK (3 << 1) +#define AUXCLK_CLKDIV_SHIFT 16 +#define AUXCLK_CLKDIV_MASK (0xF << 16) + +#define AUXCLK_SRCSELECT_SYS_CLK 0 +#define AUXCLK_SRCSELECT_CORE_DPLL 1 +#define AUXCLK_SRCSELECT_PER_DPLL 2 +#define AUXCLK_SRCSELECT_ALTERNATE 3 + +#define AUXCLK_CLKDIV_2 1 +#define AUXCLK_CLKDIV_16 0xF + +/* ALTCLKSRC */ +#define ALTCLKSRC_MODE_MASK 3 +#define ALTCLKSRC_ENABLE_INT_MASK 4 +#define ALTCLKSRC_ENABLE_EXT_MASK 8 + +#define ALTCLKSRC_MODE_ACTIVE 1 + +#define DPLL_NO_LOCK 0 +#define DPLL_LOCK 1 + +/* Clock Defines */ +#define V_OSCK 38400000 /* Clock output from T2 */ +#define V_SCLK V_OSCK + +struct omap4_scrm_regs { + u32 revision; /* 0x0000 */ + u32 pad00[63]; + u32 clksetuptime; /* 0x0100 */ + u32 pmicsetuptime; /* 0x0104 */ + u32 pad01[2]; + u32 altclksrc; /* 0x0110 */ + u32 pad02[2]; + u32 c2cclkm; /* 0x011c */ + u32 pad03[56]; + u32 extclkreq; /* 0x0200 */ + u32 accclkreq; /* 0x0204 */ + u32 pwrreq; /* 0x0208 */ + u32 pad04[1]; + u32 auxclkreq0; /* 0x0210 */ + u32 auxclkreq1; /* 0x0214 */ + u32 auxclkreq2; /* 0x0218 */ + u32 auxclkreq3; /* 0x021c */ + u32 auxclkreq4; /* 0x0220 */ + u32 auxclkreq5; /* 0x0224 */ + u32 pad05[3]; + u32 c2cclkreq; /* 0x0234 */ + u32 pad06[54]; + u32 auxclk0; /* 0x0310 */ + u32 auxclk1; /* 0x0314 */ + u32 auxclk2; /* 0x0318 */ + u32 auxclk3; /* 0x031c */ + u32 auxclk4; /* 0x0320 */ + u32 auxclk5; /* 0x0324 */ + u32 pad07[54]; + u32 rsttime_reg; /* 0x0400 */ + u32 pad08[6]; + u32 c2crstctrl; /* 0x041c */ + u32 extpwronrstctrl; /* 0x0420 */ + u32 pad09[59]; + u32 extwarmrstst_reg; /* 0x0510 */ + u32 apewarmrstst_reg; /* 0x0514 */ + u32 pad10[1]; + u32 c2cwarmrstst_reg; /* 0x051C */ +}; +#endif /* _CLOCKS_OMAP4_H_ */ diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap4/cpu.h b/roms/u-boot/arch/arm/include/asm/arch-omap4/cpu.h new file mode 100644 index 000000000..4c9ed4558 --- /dev/null +++ b/roms/u-boot/arch/arm/include/asm/arch-omap4/cpu.h @@ -0,0 +1,109 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2006-2010 + * Texas Instruments, <www.ti.com> + */ + +#ifndef _CPU_H +#define _CPU_H + +#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) +#include <asm/types.h> +#endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */ + +#include <asm/arch/hardware.h> + +#ifndef __KERNEL_STRICT_NAMES +#ifndef __ASSEMBLY__ +struct gptimer { + u32 tidr; /* 0x00 r */ + u8 res[0xc]; + u32 tiocp_cfg; /* 0x10 rw */ + u32 tistat; /* 0x14 r */ + u32 tisr; /* 0x18 rw */ + u32 tier; /* 0x1c rw */ + u32 twer; /* 0x20 rw */ + u32 tclr; /* 0x24 rw */ + u32 tcrr; /* 0x28 rw */ + u32 tldr; /* 0x2c rw */ + u32 ttgr; /* 0x30 rw */ + u32 twpc; /* 0x34 r */ + u32 tmar; /* 0x38 rw */ + u32 tcar1; /* 0x3c r */ + u32 tcicr; /* 0x40 rw */ + u32 tcar2; /* 0x44 r */ +}; +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL_STRICT_NAMES */ + +/* enable sys_clk NO-prescale /1 */ +#define GPT_EN ((0x0 << 2) | (0x1 << 1) | (0x1 << 0)) + +/* Watchdog */ +#ifndef __KERNEL_STRICT_NAMES +#ifndef __ASSEMBLY__ +struct watchdog { + u8 res1[0x34]; + u32 wwps; /* 0x34 r */ + u8 res2[0x10]; + u32 wspr; /* 0x48 rw */ +}; +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL_STRICT_NAMES */ + +#define WD_UNLOCK1 0xAAAA +#define WD_UNLOCK2 0x5555 + +#define TCLR_ST (0x1 << 0) +#define TCLR_AR (0x1 << 1) +#define TCLR_PRE (0x1 << 5) + +/* I2C base */ +#define I2C_BASE1 (OMAP44XX_L4_PER_BASE + 0x70000) +#define I2C_BASE2 (OMAP44XX_L4_PER_BASE + 0x72000) +#define I2C_BASE3 (OMAP44XX_L4_PER_BASE + 0x60000) +#define I2C_BASE4 (OMAP44XX_L4_PER_BASE + 0x350000) + +/* MUSB base */ +#define MUSB_BASE (OMAP44XX_L4_CORE_BASE + 0xAB000) + +/* OMAP4 GPIO registers */ +#define OMAP_GPIO_REVISION 0x0000 +#define OMAP_GPIO_SYSCONFIG 0x0010 +#define OMAP_GPIO_SYSSTATUS 0x0114 +#define OMAP_GPIO_IRQSTATUS1 0x0118 +#define OMAP_GPIO_IRQSTATUS2 0x0128 +#define OMAP_GPIO_IRQENABLE2 0x012c +#define OMAP_GPIO_IRQENABLE1 0x011c +#define OMAP_GPIO_WAKE_EN 0x0120 +#define OMAP_GPIO_CTRL 0x0130 +#define OMAP_GPIO_OE 0x0134 +#define OMAP_GPIO_DATAIN 0x0138 +#define OMAP_GPIO_DATAOUT 0x013c +#define OMAP_GPIO_LEVELDETECT0 0x0140 +#define OMAP_GPIO_LEVELDETECT1 0x0144 +#define OMAP_GPIO_RISINGDETECT 0x0148 +#define OMAP_GPIO_FALLINGDETECT 0x014c +#define OMAP_GPIO_DEBOUNCE_EN 0x0150 +#define OMAP_GPIO_DEBOUNCE_VAL 0x0154 +#define OMAP_GPIO_CLEARIRQENABLE1 0x0160 +#define OMAP_GPIO_SETIRQENABLE1 0x0164 +#define OMAP_GPIO_CLEARWKUENA 0x0180 +#define OMAP_GPIO_SETWKUENA 0x0184 +#define OMAP_GPIO_CLEARDATAOUT 0x0190 +#define OMAP_GPIO_SETDATAOUT 0x0194 + +/* + * PRCM + */ + +/* PRM */ +#define PRM_BASE 0x4A306000 +#define PRM_DEVICE_BASE (PRM_BASE + 0x1B00) + +#define PRM_RSTCTRL PRM_DEVICE_BASE +#define PRM_RSTCTRL_RESET 0x01 +#define PRM_RSTST (PRM_DEVICE_BASE + 0x4) +#define PRM_RSTST_WARM_RESET_MASK 0x07EA + +#endif /* _CPU_H */ diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap4/ehci.h b/roms/u-boot/arch/arm/include/asm/arch-omap4/ehci.h new file mode 100644 index 000000000..30bdaad64 --- /dev/null +++ b/roms/u-boot/arch/arm/include/asm/arch-omap4/ehci.h @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * OMAP EHCI port support + * Based on LINUX KERNEL + * drivers/usb/host/ehci-omap.c and drivers/mfd/omap-usb-host.c + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com + * Author: Govindraj R <govindraj.raja@ti.com> + */ + +#ifndef _OMAP4_EHCI_H_ +#define _OMAP4_EHCI_H_ + +#define OMAP_EHCI_BASE (OMAP44XX_L4_CORE_BASE + 0x64C00) +#define OMAP_UHH_BASE (OMAP44XX_L4_CORE_BASE + 0x64000) +#define OMAP_USBTLL_BASE (OMAP44XX_L4_CORE_BASE + 0x62000) + +/* UHH, TLL and opt clocks */ +#define CM_L3INIT_HSUSBHOST_CLKCTRL 0x4A009358UL + +#define HSUSBHOST_CLKCTRL_CLKSEL_UTMI_P1_MASK (1 << 24) + +/* TLL Register Set */ +#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3) +#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2) +#define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1) +#define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8) +#define OMAP_USBTLL_SYSSTATUS_RESETDONE 1 + +#define OMAP_UHH_SYSCONFIG_SOFTRESET 1 +#define OMAP_UHH_SYSSTATUS_EHCI_RESETDONE (1 << 2) +#define OMAP_UHH_SYSCONFIG_NOIDLE (1 << 2) +#define OMAP_UHH_SYSCONFIG_NOSTDBY (1 << 4) + +#define OMAP_UHH_SYSCONFIG_VAL (OMAP_UHH_SYSCONFIG_NOIDLE | \ + OMAP_UHH_SYSCONFIG_NOSTDBY) + +#endif /* _OMAP4_EHCI_H_ */ diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap4/gpio.h b/roms/u-boot/arch/arm/include/asm/arch-omap4/gpio.h new file mode 100644 index 000000000..aceb3e227 --- /dev/null +++ b/roms/u-boot/arch/arm/include/asm/arch-omap4/gpio.h @@ -0,0 +1,34 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2009 Wind River Systems, Inc. + * Tom Rix <Tom.Rix@windriver.com> + * + * This work is derived from the linux 2.6.27 kernel source + * To fetch, use the kernel repository + * git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git + * Use the v2.6.27 tag. + * + * Below is the original's header including its copyright + * + * linux/arch/arm/plat-omap/gpio.c + * + * Support functions for OMAP GPIO + * + * Copyright (C) 2003-2005 Nokia Corporation + * Written by Juha Yrjölä <juha.yrjola@nokia.com> + */ +#ifndef _GPIO_OMAP4_H +#define _GPIO_OMAP4_H + +#include <asm/omap_gpio.h> + +#define OMAP_MAX_GPIO 192 + +#define OMAP44XX_GPIO1_BASE 0x4A310000 +#define OMAP44XX_GPIO2_BASE 0x48055000 +#define OMAP44XX_GPIO3_BASE 0x48057000 +#define OMAP44XX_GPIO4_BASE 0x48059000 +#define OMAP44XX_GPIO5_BASE 0x4805B000 +#define OMAP44XX_GPIO6_BASE 0x4805D000 + +#endif /* _GPIO_OMAP4_H */ diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap4/hardware.h b/roms/u-boot/arch/arm/include/asm/arch-omap4/hardware.h new file mode 100644 index 000000000..48dc80924 --- /dev/null +++ b/roms/u-boot/arch/arm/include/asm/arch-omap4/hardware.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * hardware.h + * + * hardware specific header + * + * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/ + */ + +#ifndef __OMAP_HARDWARE_H +#define __OMAP_HARDWARE_H + +#include <asm/arch/omap.h> + +/* + * Common hardware definitions + */ + +/* BCH Error Location Module */ +#define ELM_BASE 0x48078000 + +/* GPMC Base address */ +#define GPMC_BASE 0x50000000 + +#endif diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap4/i2c.h b/roms/u-boot/arch/arm/include/asm/arch-omap4/i2c.h new file mode 100644 index 000000000..c8f2f9716 --- /dev/null +++ b/roms/u-boot/arch/arm/include/asm/arch-omap4/i2c.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2004-2010 + * Texas Instruments, <www.ti.com> + */ +#ifndef _OMAP4_I2C_H_ +#define _OMAP4_I2C_H_ + +#define I2C_DEFAULT_BASE I2C_BASE1 + +#endif /* _OMAP4_I2C_H_ */ diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap4/mem.h b/roms/u-boot/arch/arm/include/asm/arch-omap4/mem.h new file mode 100644 index 000000000..3026a002d --- /dev/null +++ b/roms/u-boot/arch/arm/include/asm/arch-omap4/mem.h @@ -0,0 +1,61 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2006-2008 + * Texas Instruments, <www.ti.com> + * + * Author + * Mansoor Ahamed <mansoor.ahamed@ti.com> + * + * Initial Code from: + * Richard Woodruff <r-woodruff2@ti.com> + */ + +#ifndef _MEM_H_ +#define _MEM_H_ + +/* + * GPMC settings - + * Definitions is as per the following format + * #define <PART>_GPMC_CONFIG<x> <value> + * Where: + * PART is the part name e.g. STNOR - Intel Strata Flash + * x is GPMC config registers from 1 to 6 (there will be 6 macros) + * Value is corresponding value + * + * For every valid PRCM configuration there should be only one definition of + * the same. if values are independent of the board, this definition will be + * present in this file if values are dependent on the board, then this should + * go into corresponding mem-boardName.h file + * + * Currently valid part Names are (PART): + * M_NAND - Micron NAND + * STNOR - STMicrolelctronics M29W128GL + */ +#define GPMC_SIZE_256M 0x0 +#define GPMC_SIZE_128M 0x8 +#define GPMC_SIZE_64M 0xC +#define GPMC_SIZE_32M 0xE +#define GPMC_SIZE_16M 0xF + +#define M_NAND_GPMC_CONFIG1 0x00000800 +#define M_NAND_GPMC_CONFIG2 0x001e1e00 +#define M_NAND_GPMC_CONFIG3 0x001e1e00 +#define M_NAND_GPMC_CONFIG4 0x16051807 +#define M_NAND_GPMC_CONFIG5 0x00151e1e +#define M_NAND_GPMC_CONFIG6 0x16000f80 +#define M_NAND_GPMC_CONFIG7 0x00000008 + +#define STNOR_GPMC_CONFIG1 0x00001200 +#define STNOR_GPMC_CONFIG2 0x00101000 +#define STNOR_GPMC_CONFIG3 0x00030301 +#define STNOR_GPMC_CONFIG4 0x10041004 +#define STNOR_GPMC_CONFIG5 0x000C1010 +#define STNOR_GPMC_CONFIG6 0x08070280 +#define STNOR_GPMC_CONFIG7 0x00000F48 + +/* max number of GPMC Chip Selects */ +#define GPMC_MAX_CS 8 +/* max number of GPMC regs */ +#define GPMC_MAX_REG 7 + +#endif /* endif _MEM_H_ */ diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap4/mmc_host_def.h b/roms/u-boot/arch/arm/include/asm/arch-omap4/mmc_host_def.h new file mode 100644 index 000000000..d06779956 --- /dev/null +++ b/roms/u-boot/arch/arm/include/asm/arch-omap4/mmc_host_def.h @@ -0,0 +1,38 @@ +/* + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation's version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef MMC_HOST_DEF_H +#define MMC_HOST_DEF_H + +#include <asm/omap_mmc.h> + +/* + * OMAP HSMMC register definitions + */ + +#define OMAP_HSMMC1_BASE 0x4809C000 +#define OMAP_HSMMC2_BASE 0x480B4000 +#define OMAP_HSMMC3_BASE 0x480AD000 + +#endif /* MMC_HOST_DEF_H */ diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap4/mux_omap4.h b/roms/u-boot/arch/arm/include/asm/arch-omap4/mux_omap4.h new file mode 100644 index 000000000..854203c4e --- /dev/null +++ b/roms/u-boot/arch/arm/include/asm/arch-omap4/mux_omap4.h @@ -0,0 +1,328 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2004-2009 + * Texas Instruments Incorporated + * Richard Woodruff <r-woodruff2@ti.com> + * Aneesh V <aneesh@ti.com> + * Balaji Krishnamoorthy <balajitk@ti.com> + */ +#ifndef _MUX_OMAP4_H_ +#define _MUX_OMAP4_H_ + +#include <asm/types.h> + +struct pad_conf_entry { + + u16 offset; + + u16 val; + +}; + +#ifdef CONFIG_OFF_PADCONF +#define OFF_PD (1 << 12) +#define OFF_PU (3 << 12) +#define OFF_OUT_PTD (0 << 10) +#define OFF_OUT_PTU (2 << 10) +#define OFF_IN (1 << 10) +#define OFF_OUT (0 << 10) +#define OFF_EN (1 << 9) +#else +#define OFF_PD (0 << 12) +#define OFF_PU (0 << 12) +#define OFF_OUT_PTD (0 << 10) +#define OFF_OUT_PTU (0 << 10) +#define OFF_IN (0 << 10) +#define OFF_OUT (0 << 10) +#define OFF_EN (0 << 9) +#endif + +#define IEN (1 << 8) +#define IDIS (0 << 8) +#define PTU (3 << 3) +#define PTD (1 << 3) +#define EN (1 << 3) +#define DIS (0 << 3) + +#define M0 0 +#define M1 1 +#define M2 2 +#define M3 3 +#define M4 4 +#define M5 5 +#define M6 6 +#define M7 7 + +#define SAFE_MODE M7 + +#ifdef CONFIG_OFF_PADCONF +#define OFF_IN_PD (OFF_PD | OFF_IN | OFF_EN) +#define OFF_IN_PU (OFF_PU | OFF_IN | OFF_EN) +#define OFF_OUT_PD (OFF_OUT_PTD | OFF_OUT | OFF_EN) +#define OFF_OUT_PU (OFF_OUT_PTU | OFF_OUT | OFF_EN) +#else +#define OFF_IN_PD 0 +#define OFF_IN_PU 0 +#define OFF_OUT_PD 0 +#define OFF_OUT_PU 0 +#endif + +#define CORE_REVISION 0x0000 +#define CORE_HWINFO 0x0004 +#define CORE_SYSCONFIG 0x0010 +#define GPMC_AD0 0x0040 +#define GPMC_AD1 0x0042 +#define GPMC_AD2 0x0044 +#define GPMC_AD3 0x0046 +#define GPMC_AD4 0x0048 +#define GPMC_AD5 0x004A +#define GPMC_AD6 0x004C +#define GPMC_AD7 0x004E +#define GPMC_AD8 0x0050 +#define GPMC_AD9 0x0052 +#define GPMC_AD10 0x0054 +#define GPMC_AD11 0x0056 +#define GPMC_AD12 0x0058 +#define GPMC_AD13 0x005A +#define GPMC_AD14 0x005C +#define GPMC_AD15 0x005E +#define GPMC_A16 0x0060 +#define GPMC_A17 0x0062 +#define GPMC_A18 0x0064 +#define GPMC_A19 0x0066 +#define GPMC_A20 0x0068 +#define GPMC_A21 0x006A +#define GPMC_A22 0x006C +#define GPMC_A23 0x006E +#define GPMC_A24 0x0070 +#define GPMC_A25 0x0072 +#define GPMC_NCS0 0x0074 +#define GPMC_NCS1 0x0076 +#define GPMC_NCS2 0x0078 +#define GPMC_NCS3 0x007A +#define GPMC_NWP 0x007C +#define GPMC_CLK 0x007E +#define GPMC_NADV_ALE 0x0080 +#define GPMC_NOE 0x0082 +#define GPMC_NWE 0x0084 +#define GPMC_NBE0_CLE 0x0086 +#define GPMC_NBE1 0x0088 +#define GPMC_WAIT0 0x008A +#define GPMC_WAIT1 0x008C +#define C2C_DATA11 0x008E +#define C2C_DATA12 0x0090 +#define C2C_DATA13 0x0092 +#define C2C_DATA14 0x0094 +#define C2C_DATA15 0x0096 +#define HDMI_HPD 0x0098 +#define HDMI_CEC 0x009A +#define HDMI_DDC_SCL 0x009C +#define HDMI_DDC_SDA 0x009E +#define CSI21_DX0 0x00A0 +#define CSI21_DY0 0x00A2 +#define CSI21_DX1 0x00A4 +#define CSI21_DY1 0x00A6 +#define CSI21_DX2 0x00A8 +#define CSI21_DY2 0x00AA +#define CSI21_DX3 0x00AC +#define CSI21_DY3 0x00AE +#define CSI21_DX4 0x00B0 +#define CSI21_DY4 0x00B2 +#define CSI22_DX0 0x00B4 +#define CSI22_DY0 0x00B6 +#define CSI22_DX1 0x00B8 +#define CSI22_DY1 0x00BA +#define CAM_SHUTTER 0x00BC +#define CAM_STROBE 0x00BE +#define CAM_GLOBALRESET 0x00C0 +#define USBB1_ULPITLL_CLK 0x00C2 +#define USBB1_ULPITLL_STP 0x00C4 +#define USBB1_ULPITLL_DIR 0x00C6 +#define USBB1_ULPITLL_NXT 0x00C8 +#define USBB1_ULPITLL_DAT0 0x00CA +#define USBB1_ULPITLL_DAT1 0x00CC +#define USBB1_ULPITLL_DAT2 0x00CE +#define USBB1_ULPITLL_DAT3 0x00D0 +#define USBB1_ULPITLL_DAT4 0x00D2 +#define USBB1_ULPITLL_DAT5 0x00D4 +#define USBB1_ULPITLL_DAT6 0x00D6 +#define USBB1_ULPITLL_DAT7 0x00D8 +#define USBB1_HSIC_DATA 0x00DA +#define USBB1_HSIC_STROBE 0x00DC +#define USBC1_ICUSB_DP 0x00DE +#define USBC1_ICUSB_DM 0x00E0 +#define SDMMC1_CLK 0x00E2 +#define SDMMC1_CMD 0x00E4 +#define SDMMC1_DAT0 0x00E6 +#define SDMMC1_DAT1 0x00E8 +#define SDMMC1_DAT2 0x00EA +#define SDMMC1_DAT3 0x00EC +#define SDMMC1_DAT4 0x00EE +#define SDMMC1_DAT5 0x00F0 +#define SDMMC1_DAT6 0x00F2 +#define SDMMC1_DAT7 0x00F4 +#define ABE_MCBSP2_CLKX 0x00F6 +#define ABE_MCBSP2_DR 0x00F8 +#define ABE_MCBSP2_DX 0x00FA +#define ABE_MCBSP2_FSX 0x00FC +#define ABE_MCBSP1_CLKX 0x00FE +#define ABE_MCBSP1_DR 0x0100 +#define ABE_MCBSP1_DX 0x0102 +#define ABE_MCBSP1_FSX 0x0104 +#define ABE_PDM_UL_DATA 0x0106 +#define ABE_PDM_DL_DATA 0x0108 +#define ABE_PDM_FRAME 0x010A +#define ABE_PDM_LB_CLK 0x010C +#define ABE_CLKS 0x010E +#define ABE_DMIC_CLK1 0x0110 +#define ABE_DMIC_DIN1 0x0112 +#define ABE_DMIC_DIN2 0x0114 +#define ABE_DMIC_DIN3 0x0116 +#define UART2_CTS 0x0118 +#define UART2_RTS 0x011A +#define UART2_RX 0x011C +#define UART2_TX 0x011E +#define HDQ_SIO 0x0120 +#define I2C1_SCL 0x0122 +#define I2C1_SDA 0x0124 +#define I2C2_SCL 0x0126 +#define I2C2_SDA 0x0128 +#define I2C3_SCL 0x012A +#define I2C3_SDA 0x012C +#define I2C4_SCL 0x012E +#define I2C4_SDA 0x0130 +#define MCSPI1_CLK 0x0132 +#define MCSPI1_SOMI 0x0134 +#define MCSPI1_SIMO 0x0136 +#define MCSPI1_CS0 0x0138 +#define MCSPI1_CS1 0x013A +#define MCSPI1_CS2 0x013C +#define MCSPI1_CS3 0x013E +#define UART3_CTS_RCTX 0x0140 +#define UART3_RTS_SD 0x0142 +#define UART3_RX_IRRX 0x0144 +#define UART3_TX_IRTX 0x0146 +#define SDMMC5_CLK 0x0148 +#define SDMMC5_CMD 0x014A +#define SDMMC5_DAT0 0x014C +#define SDMMC5_DAT1 0x014E +#define SDMMC5_DAT2 0x0150 +#define SDMMC5_DAT3 0x0152 +#define MCSPI4_CLK 0x0154 +#define MCSPI4_SIMO 0x0156 +#define MCSPI4_SOMI 0x0158 +#define MCSPI4_CS0 0x015A +#define UART4_RX 0x015C +#define UART4_TX 0x015E +#define USBB2_ULPITLL_CLK 0x0160 +#define USBB2_ULPITLL_STP 0x0162 +#define USBB2_ULPITLL_DIR 0x0164 +#define USBB2_ULPITLL_NXT 0x0166 +#define USBB2_ULPITLL_DAT0 0x0168 +#define USBB2_ULPITLL_DAT1 0x016A +#define USBB2_ULPITLL_DAT2 0x016C +#define USBB2_ULPITLL_DAT3 0x016E +#define USBB2_ULPITLL_DAT4 0x0170 +#define USBB2_ULPITLL_DAT5 0x0172 +#define USBB2_ULPITLL_DAT6 0x0174 +#define USBB2_ULPITLL_DAT7 0x0176 +#define USBB2_HSIC_DATA 0x0178 +#define USBB2_HSIC_STROBE 0x017A +#define UNIPRO_TX0 0x017C +#define UNIPRO_TY0 0x017E +#define UNIPRO_TX1 0x0180 +#define UNIPRO_TY1 0x0182 +#define UNIPRO_TX2 0x0184 +#define UNIPRO_TY2 0x0186 +#define UNIPRO_RX0 0x0188 +#define UNIPRO_RY0 0x018A +#define UNIPRO_RX1 0x018C +#define UNIPRO_RY1 0x018E +#define UNIPRO_RX2 0x0190 +#define UNIPRO_RY2 0x0192 +#define USBA0_OTG_CE 0x0194 +#define USBA0_OTG_DP 0x0196 +#define USBA0_OTG_DM 0x0198 +#define FREF_CLK1_OUT 0x019A +#define FREF_CLK2_OUT 0x019C +#define SYS_NIRQ1 0x019E +#define SYS_NIRQ2 0x01A0 +#define SYS_BOOT0 0x01A2 +#define SYS_BOOT1 0x01A4 +#define SYS_BOOT2 0x01A6 +#define SYS_BOOT3 0x01A8 +#define SYS_BOOT4 0x01AA +#define SYS_BOOT5 0x01AC +#define DPM_EMU0 0x01AE +#define DPM_EMU1 0x01B0 +#define DPM_EMU2 0x01B2 +#define DPM_EMU3 0x01B4 +#define DPM_EMU4 0x01B6 +#define DPM_EMU5 0x01B8 +#define DPM_EMU6 0x01BA +#define DPM_EMU7 0x01BC +#define DPM_EMU8 0x01BE +#define DPM_EMU9 0x01C0 +#define DPM_EMU10 0x01C2 +#define DPM_EMU11 0x01C4 +#define DPM_EMU12 0x01C6 +#define DPM_EMU13 0x01C8 +#define DPM_EMU14 0x01CA +#define DPM_EMU15 0x01CC +#define DPM_EMU16 0x01CE +#define DPM_EMU17 0x01D0 +#define DPM_EMU18 0x01D2 +#define DPM_EMU19 0x01D4 +#define WAKEUPEVENT_0 0x01D8 +#define WAKEUPEVENT_1 0x01DC +#define WAKEUPEVENT_2 0x01E0 +#define WAKEUPEVENT_3 0x01E4 +#define WAKEUPEVENT_4 0x01E8 +#define WAKEUPEVENT_5 0x01EC +#define WAKEUPEVENT_6 0x01F0 + +#define WKUP_REVISION 0x0000 +#define WKUP_HWINFO 0x0004 +#define WKUP_SYSCONFIG 0x0010 +#define PAD0_SIM_IO 0x0040 +#define PAD1_SIM_CLK 0x0042 +#define PAD0_SIM_RESET 0x0044 +#define PAD1_SIM_CD 0x0046 +#define PAD0_SIM_PWRCTRL 0x0048 +#define PAD1_SR_SCL 0x004A +#define PAD0_SR_SDA 0x004C +#define PAD1_FREF_XTAL_IN 0x004E +#define PAD0_FREF_SLICER_IN 0x0050 +#define PAD1_FREF_CLK_IOREQ 0x0052 +#define PAD0_FREF_CLK0_OUT 0x0054 +#define PAD1_FREF_CLK3_REQ 0x0056 +#define PAD0_FREF_CLK3_OUT 0x0058 +#define PAD1_FREF_CLK4_REQ 0x005A +#define PAD0_FREF_CLK4_OUT 0x005C +#define PAD1_SYS_32K 0x005E +#define PAD0_SYS_NRESPWRON 0x0060 +#define PAD1_SYS_NRESWARM 0x0062 +#define PAD0_SYS_PWR_REQ 0x0064 +#define PAD1_SYS_PWRON_RESET 0x0066 +#define PAD0_SYS_BOOT6 0x0068 +#define PAD1_SYS_BOOT7 0x006A +#define PAD0_JTAG_NTRST 0x006C +#define PAD1_JTAG_TCK 0x006D +#define PAD0_JTAG_RTCK 0x0070 +#define PAD1_JTAG_TMS_TMSC 0x0072 +#define PAD0_JTAG_TDI 0x0074 +#define PAD1_JTAG_TDO 0x0076 +#define PADCONF_WAKEUPEVENT_0 0x007C +#define CONTROL_SMART1NOPMIO_PADCONF_0 0x05A0 +#define CONTROL_SMART1NOPMIO_PADCONF_1 0x05A4 +#define PADCONF_MODE 0x05A8 +#define CONTROL_XTAL_OSCILLATOR 0x05AC +#define CONTROL_CONTROL_I2C_2 0x0604 +#define CONTROL_CONTROL_JTAG 0x0608 +#define CONTROL_CONTROL_SYS 0x060C +#define CONTROL_SPARE_RW 0x0614 +#define CONTROL_SPARE_R 0x0618 +#define CONTROL_SPARE_R_C0 0x061C + +#define CONTROL_WKUP_PAD1_FREF_CLK4_REQ 0x4A31E05A +#endif /* _MUX_OMAP4_H_ */ diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap4/omap.h b/roms/u-boot/arch/arm/include/asm/arch-omap4/omap.h new file mode 100644 index 000000000..8919088a7 --- /dev/null +++ b/roms/u-boot/arch/arm/include/asm/arch-omap4/omap.h @@ -0,0 +1,143 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Authors: + * Aneesh V <aneesh@ti.com> + * + * Derived from OMAP3 work by + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <x0khasim@ti.com> + */ + +#ifndef _OMAP4_H_ +#define _OMAP4_H_ + +#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) +#include <asm/types.h> +#endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */ + +#include <linux/sizes.h> + +/* + * L4 Peripherals - L4 Wakeup and L4 Core now + */ +#define OMAP44XX_L4_CORE_BASE 0x4A000000 +#define OMAP44XX_L4_WKUP_BASE 0x4A300000 +#define OMAP44XX_L4_PER_BASE 0x48000000 + +#define OMAP44XX_DRAM_ADDR_SPACE_START 0x80000000 +#define OMAP44XX_DRAM_ADDR_SPACE_END 0xD0000000 +#define DRAM_ADDR_SPACE_START OMAP44XX_DRAM_ADDR_SPACE_START +#define DRAM_ADDR_SPACE_END OMAP44XX_DRAM_ADDR_SPACE_END + +/* CONTROL_ID_CODE */ +#define CONTROL_ID_CODE 0x4A002204 + +#define OMAP4_CONTROL_ID_CODE_ES1_0 0x0B85202F +#define OMAP4_CONTROL_ID_CODE_ES2_0 0x1B85202F +#define OMAP4_CONTROL_ID_CODE_ES2_1 0x3B95C02F +#define OMAP4_CONTROL_ID_CODE_ES2_2 0x4B95C02F +#define OMAP4_CONTROL_ID_CODE_ES2_3 0x6B95C02F +#define OMAP4460_CONTROL_ID_CODE_ES1_0 0x0B94E02F +#define OMAP4460_CONTROL_ID_CODE_ES1_1 0x2B94E02F +#define OMAP4470_CONTROL_ID_CODE_ES1_0 0x0B97502F + +/* UART */ +#define UART1_BASE (OMAP44XX_L4_PER_BASE + 0x6a000) +#define UART2_BASE (OMAP44XX_L4_PER_BASE + 0x6c000) +#define UART3_BASE (OMAP44XX_L4_PER_BASE + 0x20000) + +/* General Purpose Timers */ +#define GPT1_BASE (OMAP44XX_L4_WKUP_BASE + 0x18000) +#define GPT2_BASE (OMAP44XX_L4_PER_BASE + 0x32000) +#define GPT3_BASE (OMAP44XX_L4_PER_BASE + 0x34000) + +/* Watchdog Timer2 - MPU watchdog */ +#define WDT2_BASE (OMAP44XX_L4_WKUP_BASE + 0x14000) + +/* + * Hardware Register Details + */ + +/* Watchdog Timer */ +#define WD_UNLOCK1 0xAAAA +#define WD_UNLOCK2 0x5555 + +/* GP Timer */ +#define TCLR_ST (0x1 << 0) +#define TCLR_AR (0x1 << 1) +#define TCLR_PRE (0x1 << 5) + +/* Control Module */ +#define LDOSRAM_ACTMODE_VSET_IN_MASK (0x1F << 5) +#define LDOSRAM_VOLT_CTRL_OVERRIDE 0x0401040f +#define CONTROL_EFUSE_1_OVERRIDE 0x1C4D0110 +#define CONTROL_EFUSE_2_OVERRIDE 0x99084000 + +/* LPDDR2 IO regs */ +#define CONTROL_LPDDR2IO_SLEW_125PS_DRV8_PULL_DOWN 0x1C1C1C1C +#define CONTROL_LPDDR2IO_SLEW_325PS_DRV8_GATE_KEEPER 0x9E9E9E9E +#define CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN 0x7C7C7C7C +#define LPDDR2IO_GR10_WD_MASK (3 << 17) +#define CONTROL_LPDDR2IO_3_VAL 0xA0888C0F + +/* CONTROL_EFUSE_2 */ +#define CONTROL_EFUSE_2_NMOS_PMOS_PTV_CODE_1 0x00ffc000 + +#define MMC1_PWRDNZ (1 << 26) +#define MMC1_PBIASLITE_PWRDNZ (1 << 22) +#define MMC1_PBIASLITE_VMODE (1 << 21) + +#ifndef __ASSEMBLY__ + +struct s32ktimer { + unsigned char res[0x10]; + unsigned int s32k_cr; /* 0x10 */ +}; + +#define DEVICE_TYPE_SHIFT (0x8) +#define DEVICE_TYPE_MASK (0x7 << DEVICE_TYPE_SHIFT) + +#endif /* __ASSEMBLY__ */ + +/* + * Non-secure SRAM Addresses + * Non-secure RAM starts at 0x40300000 for GP devices. But we keep SRAM_BASE + * at 0x40304000(EMU base) so that our code works for both EMU and GP + */ +#define NON_SECURE_SRAM_START 0x40304000 +#define NON_SECURE_SRAM_END 0x4030E000 /* Not inclusive */ +#define NON_SECURE_SRAM_IMG_END 0x4030C000 +#define SRAM_SCRATCH_SPACE_ADDR (NON_SECURE_SRAM_IMG_END - SZ_1K) +/* base address for indirect vectors (internal boot mode) */ +#define SRAM_ROM_VECT_BASE 0x4030D000 + +/* ABB settings */ +#define OMAP_ABB_SETTLING_TIME 50 +#define OMAP_ABB_CLOCK_CYCLES 16 + +/* ABB tranxdone mask */ +#define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 7) + +#define OMAP44XX_SAR_RAM_BASE 0x4a326000 +#define OMAP_REBOOT_REASON_OFFSET 0xA0C +#define OMAP_REBOOT_REASON_SIZE 0x0F + +/* Boot parameters */ +#ifndef __ASSEMBLY__ +struct omap_boot_parameters { + unsigned int boot_message; + unsigned int boot_device_descriptor; + unsigned char boot_device; + unsigned char reset_reason; + unsigned char ch_flags; +}; + +int omap_reboot_mode(char *mode, unsigned int length); +int omap_reboot_mode_clear(void); +int omap_reboot_mode_store(char *mode); +#endif + +#endif diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap4/spl.h b/roms/u-boot/arch/arm/include/asm/arch-omap4/spl.h new file mode 100644 index 000000000..d24944af0 --- /dev/null +++ b/roms/u-boot/arch/arm/include/asm/arch-omap4/spl.h @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2012 + * Texas Instruments, <www.ti.com> + */ +#ifndef _ASM_ARCH_SPL_H_ +#define _ASM_ARCH_SPL_H_ + +#define BOOT_DEVICE_NONE 0x00 +#define BOOT_DEVICE_XIP 0x01 +#define BOOT_DEVICE_XIPWAIT 0x02 +#define BOOT_DEVICE_NAND 0x03 +#define BOOT_DEVICE_ONENAND 0x04 +#define BOOT_DEVICE_MMC1 0x05 +#define BOOT_DEVICE_MMC2 0x06 +#define BOOT_DEVICE_MMC2_2 0x07 +#define BOOT_DEVICE_UART 0x43 +#define BOOT_DEVICE_USB 0x45 + +#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1 +#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2_2 +#endif diff --git a/roms/u-boot/arch/arm/include/asm/arch-omap4/sys_proto.h b/roms/u-boot/arch/arm/include/asm/arch-omap4/sys_proto.h new file mode 100644 index 000000000..b2a688765 --- /dev/null +++ b/roms/u-boot/arch/arm/include/asm/arch-omap4/sys_proto.h @@ -0,0 +1,71 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + */ + +#ifndef _SYS_PROTO_H_ +#define _SYS_PROTO_H_ + +#include <asm/arch/omap.h> +#include <asm/arch/clock.h> +#include <asm/io.h> +#include <asm/omap_common.h> +#include <linux/mtd/omap_gpmc.h> +#include <asm/arch/mux_omap4.h> +#include <asm/ti-common/sys_proto.h> + +#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS +extern const struct emif_regs emif_regs_elpida_200_mhz_2cs; +extern const struct emif_regs emif_regs_elpida_380_mhz_1cs; +extern const struct emif_regs emif_regs_elpida_400_mhz_1cs; +extern const struct emif_regs emif_regs_elpida_400_mhz_2cs; +extern const struct dmm_lisa_map_regs lisa_map_2G_x_1_x_2; +extern const struct dmm_lisa_map_regs lisa_map_2G_x_2_x_2; +extern const struct dmm_lisa_map_regs ma_lisa_map_2G_x_2_x_2; +#else +extern const struct lpddr2_device_details elpida_2G_S4_details; +extern const struct lpddr2_device_details elpida_4G_S4_details; +#endif + +#ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS +extern const struct lpddr2_device_timings jedec_default_timings; +#else +extern const struct lpddr2_device_timings elpida_2G_S4_timings; +#endif + +struct omap_sysinfo { + char *board_string; +}; +extern const struct omap_sysinfo sysinfo; + +void gpmc_init(void); +void watchdog_init(void); +u32 get_device_type(void); +void do_set_mux(u32 base, struct pad_conf_entry const *array, int size); +void set_muxconf_regs(void); +u32 wait_on_value(u32, u32, void *, u32); +void sdelay(unsigned long); +void setup_early_clocks(void); +void prcm_init(void); +void do_board_detect(void); +void bypass_dpll(u32 const base); +void freq_update_core(void); +u32 get_sys_clk_freq(void); +u32 omap4_ddr_clk(void); +void cancel_out(u32 *num, u32 *den, u32 den_limit); +void sdram_init(void); +u32 omap_sdram_size(void); +u32 cortex_rev(void); +void save_omap_boot_params(void); +void init_omap_revision(void); +void do_io_settings(void); +void sri2c_init(void); +int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data); +u32 warm_reset(void); +void force_emif_self_refresh(void); +void setup_warmreset_time(void); + +#define OMAP4_SERVICE_PL310_CONTROL_REG_SET 0x102 + +#endif |