diff options
Diffstat (limited to 'roms/u-boot/arch/arm/include/asm/armv7.h')
| -rw-r--r-- | roms/u-boot/arch/arm/include/asm/armv7.h | 161 |
1 files changed, 161 insertions, 0 deletions
diff --git a/roms/u-boot/arch/arm/include/asm/armv7.h b/roms/u-boot/arch/arm/include/asm/armv7.h new file mode 100644 index 000000000..2fb824b69 --- /dev/null +++ b/roms/u-boot/arch/arm/include/asm/armv7.h @@ -0,0 +1,161 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * Aneesh V <aneesh@ti.com> + */ +#ifndef ARMV7_H +#define ARMV7_H + +/* Cortex-A9 revisions */ +#define MIDR_CORTEX_A9_R0P1 0x410FC091 +#define MIDR_CORTEX_A9_R1P2 0x411FC092 +#define MIDR_CORTEX_A9_R1P3 0x411FC093 +#define MIDR_CORTEX_A9_R2P10 0x412FC09A + +/* Cortex-A15 revisions */ +#define MIDR_CORTEX_A15_R0P0 0x410FC0F0 +#define MIDR_CORTEX_A15_R2P2 0x412FC0F2 + +/* Cortex-A7 revisions */ +#define MIDR_CORTEX_A7_R0P0 0x410FC070 + +#define MIDR_PRIMARY_PART_MASK 0xFF0FFFF0 + +/* ID_PFR1 feature fields */ +#define CPUID_ARM_SEC_SHIFT 4 +#define CPUID_ARM_SEC_MASK (0xF << CPUID_ARM_SEC_SHIFT) +#define CPUID_ARM_VIRT_SHIFT 12 +#define CPUID_ARM_VIRT_MASK (0xF << CPUID_ARM_VIRT_SHIFT) +#define CPUID_ARM_GENTIMER_SHIFT 16 +#define CPUID_ARM_GENTIMER_MASK (0xF << CPUID_ARM_GENTIMER_SHIFT) + +/* valid bits in CBAR register / PERIPHBASE value */ +#define CBAR_MASK 0xFFFF8000 + +/* CCSIDR */ +#define CCSIDR_LINE_SIZE_OFFSET 0 +#define CCSIDR_LINE_SIZE_MASK 0x7 +#define CCSIDR_ASSOCIATIVITY_OFFSET 3 +#define CCSIDR_ASSOCIATIVITY_MASK (0x3FF << 3) +#define CCSIDR_NUM_SETS_OFFSET 13 +#define CCSIDR_NUM_SETS_MASK (0x7FFF << 13) + +/* + * Values for InD field in CSSELR + * Selects the type of cache + */ +#define ARMV7_CSSELR_IND_DATA_UNIFIED 0 +#define ARMV7_CSSELR_IND_INSTRUCTION 1 + +/* Values for Ctype fields in CLIDR */ +#define ARMV7_CLIDR_CTYPE_NO_CACHE 0 +#define ARMV7_CLIDR_CTYPE_INSTRUCTION_ONLY 1 +#define ARMV7_CLIDR_CTYPE_DATA_ONLY 2 +#define ARMV7_CLIDR_CTYPE_INSTRUCTION_DATA 3 +#define ARMV7_CLIDR_CTYPE_UNIFIED 4 + +#ifndef __ASSEMBLY__ +#include <linux/types.h> +#include <asm/io.h> +#include <asm/barriers.h> + +/* read L2 control register (L2CTLR) */ +static inline uint32_t read_l2ctlr(void) +{ + uint32_t val = 0; + + asm volatile ("mrc p15, 1, %0, c9, c0, 2" : "=r" (val)); + + return val; +} + +/* write L2 control register (L2CTLR) */ +static inline void write_l2ctlr(uint32_t val) +{ + /* + * Note: L2CTLR can only be written when the L2 memory system + * is idle, ie before the MMU is enabled. + */ + asm volatile("mcr p15, 1, %0, c9, c0, 2" : : "r" (val) : "memory"); + isb(); +} + +/* + * Workaround for ARM errata # 798870 + * Set L2ACTLR[7] to reissue any memory transaction in the L2 that has been + * stalled for 1024 cycles to verify that its hazard condition still exists. + */ +static inline void v7_enable_l2_hazard_detect(void) +{ + uint32_t val; + + /* L2ACTLR[7]: Enable hazard detect timeout */ + asm volatile ("mrc p15, 1, %0, c15, c0, 0\n\t" : "=r"(val)); + val |= (1 << 7); + asm volatile ("mcr p15, 1, %0, c15, c0, 0\n\t" : : "r"(val)); +} + +/* + * Workaround for ARM errata # 799270 + * Ensure that the L2 logic has been used within the previous 256 cycles + * before modifying the ACTLR.SMP bit. This is required during boot before + * MMU has been enabled, or during a specified reset or power down sequence. + */ +static inline void v7_enable_smp(uint32_t address) +{ + uint32_t temp, val; + + /* Read auxiliary control register */ + asm volatile ("mrc p15, 0, %0, c1, c0, 1\n\t" : "=r"(val)); + + /* Enable SMP */ + val |= (1 << 6); + + /* Dummy read to assure L2 access */ + temp = readl(address); + temp &= 0; + val |= temp; + + /* Write auxiliary control register */ + asm volatile ("mcr p15, 0, %0, c1, c0, 1\n\t" : : "r"(val)); + + CP15DSB; + CP15ISB; +} + +void v7_en_l2_hazard_detect(void); +void v7_outer_cache_enable(void); +void v7_outer_cache_disable(void); +void v7_outer_cache_flush_all(void); +void v7_outer_cache_inval_all(void); +void v7_outer_cache_flush_range(u32 start, u32 end); +void v7_outer_cache_inval_range(u32 start, u32 end); + +#ifdef CONFIG_ARMV7_NONSEC + +int armv7_init_nonsec(void); +int armv7_apply_memory_carveout(u64 *start, u64 *size); +bool armv7_boot_nonsec(void); + +/* defined in assembly file */ +unsigned int _nonsec_init(void); +void _do_nonsec_entry(void *target_pc, unsigned long r0, + unsigned long r1, unsigned long r2); +void _smp_pen(void); + +extern char __secure_start[]; +extern char __secure_end[]; +extern char __secure_stack_start[]; +extern char __secure_stack_end[]; + +#endif /* CONFIG_ARMV7_NONSEC */ + +void v7_arch_cp15_set_l2aux_ctrl(u32 l2auxctrl, u32 cpu_midr, + u32 cpu_rev_comb, u32 cpu_variant, + u32 cpu_rev); +void v7_arch_cp15_set_acr(u32 acr, u32 cpu_midr, u32 cpu_rev_comb, + u32 cpu_variant, u32 cpu_rev); +#endif /* ! __ASSEMBLY__ */ + +#endif |