diff options
Diffstat (limited to 'roms/u-boot/arch/arm/mach-aspeed/ast2600/board_common.c')
-rw-r--r-- | roms/u-boot/arch/arm/mach-aspeed/ast2600/board_common.c | 106 |
1 files changed, 106 insertions, 0 deletions
diff --git a/roms/u-boot/arch/arm/mach-aspeed/ast2600/board_common.c b/roms/u-boot/arch/arm/mach-aspeed/ast2600/board_common.c new file mode 100644 index 000000000..82ff21908 --- /dev/null +++ b/roms/u-boot/arch/arm/mach-aspeed/ast2600/board_common.c @@ -0,0 +1,106 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) Aspeed Technology Inc. + */ +#include <common.h> +#include <dm.h> +#include <ram.h> +#include <timer.h> +#include <asm/io.h> +#include <asm/arch/timer.h> +#include <linux/bitops.h> +#include <linux/err.h> +#include <dm/uclass.h> +#include <asm/arch/scu_ast2600.h> +#include <asm/global_data.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* Memory Control registers */ +#define MCR_BASE 0x1e6e0000 +#define MCR_CONF (MCR_BASE + 0x004) + +/* bit fields of MCR_CONF */ +#define MCR_CONF_ECC_EN BIT(7) +#define MCR_CONF_VGA_MEMSZ_MASK GENMASK(3, 2) +#define MCR_CONF_VGA_MEMSZ_SHIFT 2 +#define MCR_CONF_MEMSZ_MASK GENMASK(1, 0) +#define MCR_CONF_MEMSZ_SHIFT 0 + +int dram_init(void) +{ + int ret; + struct udevice *dev; + struct ram_info ram; + + ret = uclass_get_device(UCLASS_RAM, 0, &dev); + if (ret) { + debug("cannot get DRAM driver\n"); + return ret; + } + + ret = ram_get_info(dev, &ram); + if (ret) { + debug("cannot get DRAM information\n"); + return ret; + } + + gd->ram_size = ram.size; + return 0; +} + +int board_init(void) +{ + int i = 0, rc; + struct udevice *dev; + + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + + while (1) { + rc = uclass_get_device(UCLASS_MISC, i++, &dev); + if (rc) + break; + } + + return 0; +} + +void board_add_ram_info(int use_default) +{ + int rc; + uint32_t conf; + uint32_t ecc, act_size, vga_rsvd; + struct udevice *scu_dev; + struct ast2600_scu *scu; + + rc = uclass_get_device_by_driver(UCLASS_CLK, + DM_DRIVER_GET(aspeed_ast2600_scu), &scu_dev); + if (rc) { + debug("%s: cannot find SCU device, rc=%d\n", __func__, rc); + return; + } + + scu = devfdt_get_addr_ptr(scu_dev); + if (IS_ERR_OR_NULL(scu)) { + debug("%s: cannot get SCU address pointer\n", __func__); + return; + } + + conf = readl(MCR_CONF); + + ecc = conf & MCR_CONF_ECC_EN; + act_size = 0x100 << ((conf & MCR_CONF_MEMSZ_MASK) >> MCR_CONF_MEMSZ_SHIFT); + vga_rsvd = 0x8 << ((conf & MCR_CONF_VGA_MEMSZ_MASK) >> MCR_CONF_VGA_MEMSZ_SHIFT); + + /* no VGA reservation if efuse VGA disable bit is set */ + if (readl(scu->efuse) & SCU_EFUSE_DIS_VGA) + vga_rsvd = 0; + + printf(" (capacity:%d MiB, VGA:%d MiB), ECC %s", act_size, + vga_rsvd, (ecc) ? "on" : "off"); +} + +void enable_caches(void) +{ + /* get rid of the warning message */ +} |