diff options
Diffstat (limited to 'roms/u-boot/arch/arm/mach-mvebu/include/mach')
| -rw-r--r-- | roms/u-boot/arch/arm/mach-mvebu/include/mach/config.h | 75 | ||||
| -rw-r--r-- | roms/u-boot/arch/arm/mach-mvebu/include/mach/cpu.h | 194 | ||||
| -rw-r--r-- | roms/u-boot/arch/arm/mach-mvebu/include/mach/efuse.h | 68 | ||||
| -rw-r--r-- | roms/u-boot/arch/arm/mach-mvebu/include/mach/fw_info.h | 18 | ||||
| -rw-r--r-- | roms/u-boot/arch/arm/mach-mvebu/include/mach/gpio.h | 8 | ||||
| -rw-r--r-- | roms/u-boot/arch/arm/mach-mvebu/include/mach/soc.h | 210 |
6 files changed, 573 insertions, 0 deletions
diff --git a/roms/u-boot/arch/arm/mach-mvebu/include/mach/config.h b/roms/u-boot/arch/arm/mach-mvebu/include/mach/config.h new file mode 100644 index 000000000..02a5b8801 --- /dev/null +++ b/roms/u-boot/arch/arm/mach-mvebu/include/mach/config.h @@ -0,0 +1,75 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2011 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Lei Wen <leiwen@marvell.com> + */ + +/* + * This file should be included in board config header file. + * + * It supports common definitions for MVEBU platforms + */ + +#ifndef _MVEBU_CONFIG_H +#define _MVEBU_CONFIG_H + +#include <asm/arch/soc.h> + +#if defined(CONFIG_ARMADA_XP) || defined(CONFIG_ARMADA_375) \ + || defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_MSYS) +/* + * Set this for the common xor register definitions needed in dram.c + * for A38x as well here. + */ +#define MV88F78X60 /* for the DDR training bin_hdr code */ +#endif + +#define CONFIG_SYS_L2_PL310 + +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ +#endif + +/* + * By default the generated mvebu kwbimage.cfg is used + * If for some board, different configuration file need to be used, + * CONFIG_SYS_KWD_CONFIG should be defined in board specific header file + */ +#ifndef CONFIG_SYS_KWD_CONFIG +#define CONFIG_SYS_KWD_CONFIG arch/arm/mach-mvebu/kwbimage.cfg +#endif /* CONFIG_SYS_KWD_CONFIG */ + +/* end of 16M scrubbed by training in bootrom */ +#define CONFIG_SYS_INIT_SP_ADDR 0x00FF0000 + +#define MV_UART_CONSOLE_BASE MVEBU_UART0_BASE + +/* Needed for SPI NOR booting in SPL */ +#define CONFIG_DM_SEQ_ALIAS 1 + +/* + * Ethernet Driver configuration + */ +#ifdef CONFIG_CMD_NET +#define CONFIG_ARP_TIMEOUT 200 +#define CONFIG_NET_RETRY_COUNT 50 +#endif /* CONFIG_CMD_NET */ + +/* + * I2C related stuff + */ +#ifdef CONFIG_CMD_I2C +#ifndef CONFIG_SYS_I2C_SOFT +#define CONFIG_I2C_MVTWSI +#endif +#define CONFIG_SYS_I2C_SLAVE 0x0 +#define CONFIG_SYS_I2C_SPEED 100000 +#endif + +/* Use common timer */ +#define CONFIG_SYS_TIMER_COUNTS_DOWN +#define CONFIG_SYS_TIMER_COUNTER (MVEBU_TIMER_BASE + 0x14) +#define CONFIG_SYS_TIMER_RATE 25000000 + +#endif /* __MVEBU_CONFIG_H */ diff --git a/roms/u-boot/arch/arm/mach-mvebu/include/mach/cpu.h b/roms/u-boot/arch/arm/mach-mvebu/include/mach/cpu.h new file mode 100644 index 000000000..52473ade7 --- /dev/null +++ b/roms/u-boot/arch/arm/mach-mvebu/include/mach/cpu.h @@ -0,0 +1,194 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar <prafulla@marvell.com> + */ + +#ifndef _MVEBU_CPU_H +#define _MVEBU_CPU_H + +#include <asm/system.h> + +#ifndef __ASSEMBLY__ + +#define MVEBU_REG_PCIE_DEVID (MVEBU_REG_PCIE_BASE + 0x00) +#define MVEBU_REG_PCIE_REVID (MVEBU_REG_PCIE_BASE + 0x08) + +enum memory_bank { + BANK0, + BANK1, + BANK2, + BANK3 +}; + +enum cpu_winen { + CPU_WIN_DISABLE, + CPU_WIN_ENABLE +}; + +enum cpu_target { + CPU_TARGET_DRAM = 0x0, + CPU_TARGET_DEVICEBUS_BOOTROM_SPI = 0x1, + CPU_TARGET_ETH23 = 0x3, + CPU_TARGET_PCIE02 = 0x4, + CPU_TARGET_ETH01 = 0x7, + CPU_TARGET_PCIE13 = 0x8, + CPU_TARGET_DFX = 0x8, + CPU_TARGET_SASRAM = 0x9, + CPU_TARGET_SATA01 = 0xa, /* A38X */ + CPU_TARGET_NAND = 0xd, + CPU_TARGET_SATA23_DFX = 0xe, /* A38X */ +}; + +enum cpu_attrib { + CPU_ATTR_SASRAM = 0x01, + CPU_ATTR_DRAM_CS0 = 0x0e, + CPU_ATTR_DRAM_CS1 = 0x0d, + CPU_ATTR_DRAM_CS2 = 0x0b, + CPU_ATTR_DRAM_CS3 = 0x07, + CPU_ATTR_NANDFLASH = 0x2f, + CPU_ATTR_SPIFLASH = 0x1e, + CPU_ATTR_SPI0_CS0 = 0x1e, + CPU_ATTR_SPI0_CS1 = 0x5e, + CPU_ATTR_SPI1_CS2 = 0x9a, + CPU_ATTR_BOOTROM = 0x1d, + CPU_ATTR_PCIE_IO = 0xe0, + CPU_ATTR_PCIE_MEM = 0xe8, + CPU_ATTR_DEV_CS0 = 0x3e, + CPU_ATTR_DEV_CS1 = 0x3d, + CPU_ATTR_DEV_CS2 = 0x3b, + CPU_ATTR_DEV_CS3 = 0x37, +}; + +enum { + MVEBU_SOC_AXP, + MVEBU_SOC_A375, + MVEBU_SOC_A38X, + MVEBU_SOC_MSYS, + MVEBU_SOC_UNKNOWN, +}; + +#define MVEBU_SDRAM_SIZE_MAX 0xc0000000 + +/* + * Default Device Address MAP BAR values + */ +#define MBUS_PCI_MEM_BASE MVEBU_SDRAM_SIZE_MAX +#define MBUS_PCI_MEM_SIZE (128 << 20) +#define MBUS_PCI_IO_BASE 0xF1100000 +#define MBUS_PCI_IO_SIZE (64 << 10) +#define MBUS_SPI_BASE 0xF4000000 +#define MBUS_SPI_SIZE (8 << 20) +#define MBUS_DFX_BASE 0xF6000000 +#define MBUS_DFX_SIZE (1 << 20) +#define MBUS_BOOTROM_BASE 0xF8000000 +#define MBUS_BOOTROM_SIZE (8 << 20) + +struct mbus_win { + u32 base; + u32 size; + u8 target; + u8 attr; +}; + +/* + * System registers + * Ref: Datasheet sec:A.28 + */ +struct mvebu_system_registers { +#if defined(CONFIG_ARMADA_375) + u8 pad1[0x54]; +#else + u8 pad1[0x60]; +#endif + u32 rstoutn_mask; /* 0x60 */ + u32 sys_soft_rst; /* 0x64 */ +}; + +/* + * GPIO Registers + * Ref: Datasheet sec:A.19 + */ +struct kwgpio_registers { + u32 dout; + u32 oe; + u32 blink_en; + u32 din_pol; + u32 din; + u32 irq_cause; + u32 irq_mask; + u32 irq_level; +}; + +struct sar_freq_modes { + u8 val; + u8 ffc; /* Fabric Frequency Configuration */ + u32 p_clk; + u32 nb_clk; + u32 d_clk; +}; + +/* Needed for dynamic (board-specific) mbus configuration */ +extern struct mvebu_mbus_state mbus_state; + +/* + * functions + */ +unsigned int mvebu_sdram_bar(enum memory_bank bank); +unsigned int mvebu_sdram_bs(enum memory_bank bank); +void mvebu_sdram_size_adjust(enum memory_bank bank); +int mvebu_mbus_probe(struct mbus_win windows[], int count); +int mvebu_soc_family(void); +u32 mvebu_get_nand_clock(void); + +void return_to_bootrom(void); + +#ifndef CONFIG_DM_MMC +int mv_sdh_init(unsigned long regbase, u32 max_clk, u32 min_clk, u32 quirks); +#endif + +void get_sar_freq(struct sar_freq_modes *sar_freq); + +/* + * Highspeed SERDES PHY config init, ported from bin_hdr + * to mainline U-Boot + */ +int serdes_phy_config(void); + +/* + * DDR3 init / training code ported from Marvell bin_hdr. Now + * available in mainline U-Boot in: + * drivers/ddr/marvell + */ +int ddr3_init(void); + +/* Auto Voltage Scaling */ +#if defined(CONFIG_ARMADA_38X) +void mv_avs_init(void); +void mv_rtc_config(void); +#else +static inline void mv_avs_init(void) {} +static inline void mv_rtc_config(void) {} +#endif + +/* A8K dram functions */ +u64 a8k_dram_scan_ap_sz(void); +int a8k_dram_init_banksize(void); + +/* A3700 dram functions */ +int a3700_dram_init(void); +int a3700_dram_init_banksize(void); + +/* A3700 PCIe regions fixer for device tree */ +int a3700_fdt_fix_pcie_regions(void *blob); + +/* + * get_ref_clk + * + * return: reference clock in MHz (25 or 40) + */ +u32 get_ref_clk(void); + +#endif /* __ASSEMBLY__ */ +#endif /* _MVEBU_CPU_H */ diff --git a/roms/u-boot/arch/arm/mach-mvebu/include/mach/efuse.h b/roms/u-boot/arch/arm/mach-mvebu/include/mach/efuse.h new file mode 100644 index 000000000..bbc5844d8 --- /dev/null +++ b/roms/u-boot/arch/arm/mach-mvebu/include/mach/efuse.h @@ -0,0 +1,68 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2015 Reinhard Pfau <reinhard.pfau@gdsys.cc> + */ + +#ifndef _MVEBU_EFUSE_H +#define _MVEBU_EFUSE_H + +#include <common.h> + +struct efuse_val { + union { + struct { + u8 d[8]; + } bytes; + struct { + u16 d[4]; + } words; + struct { + u32 d[2]; + } dwords; + }; + u32 lock; +}; + +#if defined(CONFIG_ARMADA_38X) + +enum efuse_line { + EFUSE_LINE_SECURE_BOOT = 24, + EFUSE_LINE_PUBKEY_DIGEST_0 = 26, + EFUSE_LINE_PUBKEY_DIGEST_1 = 27, + EFUSE_LINE_PUBKEY_DIGEST_2 = 28, + EFUSE_LINE_PUBKEY_DIGEST_3 = 29, + EFUSE_LINE_PUBKEY_DIGEST_4 = 30, + EFUSE_LINE_CSK_0_VALID = 31, + EFUSE_LINE_CSK_1_VALID = 32, + EFUSE_LINE_CSK_2_VALID = 33, + EFUSE_LINE_CSK_3_VALID = 34, + EFUSE_LINE_CSK_4_VALID = 35, + EFUSE_LINE_CSK_5_VALID = 36, + EFUSE_LINE_CSK_6_VALID = 37, + EFUSE_LINE_CSK_7_VALID = 38, + EFUSE_LINE_CSK_8_VALID = 39, + EFUSE_LINE_CSK_9_VALID = 40, + EFUSE_LINE_CSK_10_VALID = 41, + EFUSE_LINE_CSK_11_VALID = 42, + EFUSE_LINE_CSK_12_VALID = 43, + EFUSE_LINE_CSK_13_VALID = 44, + EFUSE_LINE_CSK_14_VALID = 45, + EFUSE_LINE_CSK_15_VALID = 46, + EFUSE_LINE_FLASH_ID = 47, + EFUSE_LINE_BOX_ID = 48, + + EFUSE_LINE_MIN = 0, + EFUSE_LINE_MAX = 63, +}; + +#endif + +int mvebu_efuse_init_hw(void); + +int mvebu_read_efuse(int nr, struct efuse_val *val); + +int mvebu_write_efuse(int nr, struct efuse_val *val); + +int mvebu_lock_efuse(int nr); + +#endif diff --git a/roms/u-boot/arch/arm/mach-mvebu/include/mach/fw_info.h b/roms/u-boot/arch/arm/mach-mvebu/include/mach/fw_info.h new file mode 100644 index 000000000..1382438e3 --- /dev/null +++ b/roms/u-boot/arch/arm/mach-mvebu/include/mach/fw_info.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 Marvell International Ltd. + */ + +#ifndef _FW_INFO_H_ +#define _FW_INFO_H_ + +/* Protected ATF and TEE region */ +#define ATF_REGION_START 0x4000000 +#define ATF_REGION_END 0x5400000 + +/* Firmware related definition used for SMC calls */ +#define MV_SIP_DRAM_SIZE 0x82000010 + +#define MMIO_REGS_PHY_BASE 0xc0000000 + +#endif /* _FW_INFO_H_ */ diff --git a/roms/u-boot/arch/arm/mach-mvebu/include/mach/gpio.h b/roms/u-boot/arch/arm/mach-mvebu/include/mach/gpio.h new file mode 100644 index 000000000..b0c95db7f --- /dev/null +++ b/roms/u-boot/arch/arm/mach-mvebu/include/mach/gpio.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef __MACH_MVEBU_GPIO_H +#define __MACH_MVEBU_GPIO_H + +/* Empty file - sdhci requires this. */ + +#endif diff --git a/roms/u-boot/arch/arm/mach-mvebu/include/mach/soc.h b/roms/u-boot/arch/arm/mach-mvebu/include/mach/soc.h new file mode 100644 index 000000000..3f3b15aa8 --- /dev/null +++ b/roms/u-boot/arch/arm/mach-mvebu/include/mach/soc.h @@ -0,0 +1,210 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar <prafulla@marvell.com> + * + * Header file for the Marvell's Feroceon CPU core. + */ + +#ifndef _MVEBU_SOC_H +#define _MVEBU_SOC_H + +#ifndef __ASSEMBLY__ +#include <linux/bitops.h> +#endif + +#define SOC_MV78230_ID 0x7823 +#define SOC_MV78260_ID 0x7826 +#define SOC_MV78460_ID 0x7846 +#define SOC_88F6720_ID 0x6720 +#define SOC_88F6810_ID 0x6810 +#define SOC_88F6820_ID 0x6820 +#define SOC_88F6828_ID 0x6828 +#define SOC_98DX3236_ID 0xf410 +#define SOC_98DX3336_ID 0xf400 +#define SOC_98DX4251_ID 0xfc00 + +/* A375 revisions */ +#define MV_88F67XX_A0_ID 0x3 + +/* A38x revisions */ +#define MV_88F68XX_Z1_ID 0x0 +#define MV_88F68XX_A0_ID 0x4 +#define MV_88F68XX_B0_ID 0xa + +/* TCLK Core Clock definition */ +#ifndef CONFIG_SYS_TCLK +#define CONFIG_SYS_TCLK 250000000 /* 250MHz */ +#endif + +/* SOC specific definations */ +#define INTREG_BASE 0xd0000000 +#define INTREG_BASE_ADDR_REG (INTREG_BASE + 0x20080) +#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_ARMADA_3700) +/* + * The SPL U-Boot version still runs with the default + * address for the internal registers, configured by + * the BootROM. Only the main U-Boot version uses the + * new internal register base address, that also is + * required for the Linux kernel. + */ +#define SOC_REGS_PHY_BASE 0xd0000000 +#elif defined(CONFIG_ARMADA_8K) +#define SOC_REGS_PHY_BASE 0xf0000000 +#else +#define SOC_REGS_PHY_BASE 0xf1000000 +#endif +#define MVEBU_REGISTER(x) (SOC_REGS_PHY_BASE + x) + +#define MVEBU_SDRAM_SCRATCH (MVEBU_REGISTER(0x01504)) +#define MVEBU_L2_CACHE_BASE (MVEBU_REGISTER(0x08000)) +#define CONFIG_SYS_PL310_BASE MVEBU_L2_CACHE_BASE +#define MVEBU_TWSI_BASE (MVEBU_REGISTER(0x11000)) +#define MVEBU_TWSI1_BASE (MVEBU_REGISTER(0x11100)) +#define MVEBU_MPP_BASE (MVEBU_REGISTER(0x18000)) +#define MVEBU_GPIO0_BASE (MVEBU_REGISTER(0x18100)) +#define MVEBU_GPIO1_BASE (MVEBU_REGISTER(0x18140)) +#define MVEBU_GPIO2_BASE (MVEBU_REGISTER(0x18180)) +#define MVEBU_SYSTEM_REG_BASE (MVEBU_REGISTER(0x18200)) +#define MVEBU_CLOCK_BASE (MVEBU_REGISTER(0x18700)) +#define MVEBU_CPU_WIN_BASE (MVEBU_REGISTER(0x20000)) +#define MVEBU_SDRAM_BASE (MVEBU_REGISTER(0x20180)) +#define MVEBU_TIMER_BASE (MVEBU_REGISTER(0x20300)) +#define MVEBU_REG_PCIE_BASE (MVEBU_REGISTER(0x40000)) +#define MVEBU_AXP_USB_BASE (MVEBU_REGISTER(0x50000)) +#define MVEBU_USB20_BASE (MVEBU_REGISTER(0x58000)) +#define MVEBU_REG_PCIE0_BASE (MVEBU_REGISTER(0x80000)) +#define MVEBU_AXP_SATA_BASE (MVEBU_REGISTER(0xa0000)) +#define MVEBU_SATA0_BASE (MVEBU_REGISTER(0xa8000)) +#define MVEBU_NAND_BASE (MVEBU_REGISTER(0xd0000)) +#define MVEBU_SDIO_BASE (MVEBU_REGISTER(0xd8000)) +#define MVEBU_LCD_BASE (MVEBU_REGISTER(0xe0000)) +#ifdef CONFIG_ARMADA_MSYS +#define MVEBU_DFX_BASE (MBUS_DFX_BASE) +#else +#define MVEBU_DFX_BASE (MVEBU_REGISTER(0xe4000)) +#endif + +#define SOC_COHERENCY_FABRIC_CTRL_REG (MVEBU_REGISTER(0x20200)) +#define MBUS_ERR_PROP_EN (1 << 8) + +#define MBUS_BRIDGE_WIN_CTRL_REG (MVEBU_REGISTER(0x20250)) +#define MBUS_BRIDGE_WIN_BASE_REG (MVEBU_REGISTER(0x20254)) + +#define MVEBU_SOC_DEV_MUX_REG (MVEBU_SYSTEM_REG_BASE + 0x08) +#define NAND_EN BIT(0) +#define NAND_ARBITER_EN BIT(27) + +#define ARMADA_XP_PUP_ENABLE (MVEBU_SYSTEM_REG_BASE + 0x44c) +#define GE0_PUP_EN BIT(0) +#define GE1_PUP_EN BIT(1) +#define LCD_PUP_EN BIT(2) +#define NAND_PUP_EN BIT(4) +#define SPI_PUP_EN BIT(5) + +#define MVEBU_CORE_DIV_CLK_CTRL(i) (MVEBU_CLOCK_BASE + ((i) * 0x8)) +#ifdef CONFIG_ARMADA_MSYS +#define MVEBU_DFX_DIV_CLK_CTRL(i) (MVEBU_DFX_BASE + 0xf8000 + 0x250 + ((i) * 0x4)) +#define NAND_ECC_DIVCKL_RATIO_OFFS 6 +#define NAND_ECC_DIVCKL_RATIO_MASK (0xF << NAND_ECC_DIVCKL_RATIO_OFFS) +#else +#define MVEBU_DFX_DIV_CLK_CTRL(i) (MVEBU_DFX_BASE + 0x250 + ((i) * 0x4)) +#endif +#ifdef CONFIG_ARMADA_MSYS +#define NAND_ECC_DIVCKL_RATIO_OFFS 6 +#define NAND_ECC_DIVCKL_RATIO_MASK (0xF << NAND_ECC_DIVCKL_RATIO_OFFS) +#else +#define NAND_ECC_DIVCKL_RATIO_OFFS 8 +#define NAND_ECC_DIVCKL_RATIO_MASK (0x3F << NAND_ECC_DIVCKL_RATIO_OFFS) +#endif + +#define SDRAM_MAX_CS 4 +#define SDRAM_ADDR_MASK 0xFF000000 + +/* MVEBU CPU memory windows */ +#define MVCPU_WIN_CTRL_DATA CPU_WIN_CTRL_DATA +#define MVCPU_WIN_ENABLE CPU_WIN_ENABLE +#define MVCPU_WIN_DISABLE CPU_WIN_DISABLE + +#define COMPHY_REFCLK_ALIGNMENT (MVEBU_REGISTER(0x182f8)) + +/* BootROM error register (also includes some status infos) */ +#define CONFIG_BOOTROM_ERR_REG (MVEBU_REGISTER(0x182d0)) +#define BOOTROM_ERR_MODE_OFFS 28 +#define BOOTROM_ERR_MODE_MASK (0xf << BOOTROM_ERR_MODE_OFFS) +#define BOOTROM_ERR_MODE_UART 0x6 +#define BOOTROM_ERR_CODE_OFFS 0 +#define BOOTROM_ERR_CODE_MASK (0xf << BOOTROM_ERR_CODE_OFFS) + +#if defined(CONFIG_ARMADA_375) +/* SAR values for Armada 375 */ +#define CONFIG_SAR_REG (MVEBU_REGISTER(0xe8200)) +#define CONFIG_SAR2_REG (MVEBU_REGISTER(0xe8204)) + +#define SAR_CPU_FREQ_OFFS 17 +#define SAR_CPU_FREQ_MASK (0x1f << SAR_CPU_FREQ_OFFS) + +#define BOOT_DEV_SEL_OFFS 3 +#define BOOT_DEV_SEL_MASK (0x3f << BOOT_DEV_SEL_OFFS) + +#define BOOT_FROM_UART 0x30 +#define BOOT_FROM_SPI 0x38 +#elif defined(CONFIG_ARMADA_38X) +/* SAR values for Armada 38x */ +#define CONFIG_SAR_REG (MVEBU_REGISTER(0x18600)) + +#define SAR_CPU_FREQ_OFFS 10 +#define SAR_CPU_FREQ_MASK (0x1f << SAR_CPU_FREQ_OFFS) +#define SAR_BOOT_DEVICE_OFFS 4 +#define SAR_BOOT_DEVICE_MASK (0x1f << SAR_BOOT_DEVICE_OFFS) + +#define BOOT_DEV_SEL_OFFS 4 +#define BOOT_DEV_SEL_MASK (0x3f << BOOT_DEV_SEL_OFFS) + +#define BOOT_FROM_NAND 0x0A +#define BOOT_FROM_SATA 0x22 +#define BOOT_FROM_UART 0x28 +#define BOOT_FROM_SATA_ALT 0x2A +#define BOOT_FROM_UART_ALT 0x3f +#define BOOT_FROM_SPI 0x32 +#define BOOT_FROM_MMC 0x30 +#define BOOT_FROM_MMC_ALT 0x31 +#elif defined(CONFIG_ARMADA_MSYS) +/* SAR values for MSYS */ +#define CONFIG_SAR_REG (MBUS_DFX_BASE + 0xf8200) +#define CONFIG_SAR2_REG (MBUS_DFX_BASE + 0xf8204) + +#define SAR_CPU_FREQ_OFFS 18 +#define SAR_CPU_FREQ_MASK (0x7 << SAR_CPU_FREQ_OFFS) +#define SAR_BOOT_DEVICE_OFFS 11 +#define SAR_BOOT_DEVICE_MASK (0x7 << SAR_BOOT_DEVICE_OFFS) + +#define BOOT_DEV_SEL_OFFS 11 +#define BOOT_DEV_SEL_MASK (0x7 << BOOT_DEV_SEL_OFFS) + +#define BOOT_FROM_NAND 0x1 +#define BOOT_FROM_UART 0x2 +#define BOOT_FROM_SPI 0x3 +#else +/* SAR values for Armada XP */ +#define CONFIG_SAR_REG (MVEBU_REGISTER(0x18230)) +#define CONFIG_SAR2_REG (MVEBU_REGISTER(0x18234)) + +#define SAR_CPU_FREQ_OFFS 21 +#define SAR_CPU_FREQ_MASK (0x7 << SAR_CPU_FREQ_OFFS) +#define SAR_FFC_FREQ_OFFS 24 +#define SAR_FFC_FREQ_MASK (0xf << SAR_FFC_FREQ_OFFS) +#define SAR2_CPU_FREQ_OFFS 20 +#define SAR2_CPU_FREQ_MASK (0x1 << SAR2_CPU_FREQ_OFFS) +#define SAR_BOOT_DEVICE_OFFS 5 +#define SAR_BOOT_DEVICE_MASK (0xf << SAR_BOOT_DEVICE_OFFS) + +#define BOOT_DEV_SEL_OFFS 5 +#define BOOT_DEV_SEL_MASK (0xf << BOOT_DEV_SEL_OFFS) + +#define BOOT_FROM_UART 0x2 +#define BOOT_FROM_SPI 0x3 +#endif + +#endif /* _MVEBU_SOC_H */ |