diff options
Diffstat (limited to 'roms/u-boot/arch/arm/mach-zynqmp/Kconfig')
| -rw-r--r-- | roms/u-boot/arch/arm/mach-zynqmp/Kconfig | 177 |
1 files changed, 177 insertions, 0 deletions
diff --git a/roms/u-boot/arch/arm/mach-zynqmp/Kconfig b/roms/u-boot/arch/arm/mach-zynqmp/Kconfig new file mode 100644 index 000000000..f1301f666 --- /dev/null +++ b/roms/u-boot/arch/arm/mach-zynqmp/Kconfig @@ -0,0 +1,177 @@ +if ARCH_ZYNQMP + +config SPL_FS_FAT + default y + +config SPL_LIBCOMMON_SUPPORT + default y + +config SPL_LIBDISK_SUPPORT + default y + +config SPL_LIBGENERIC_SUPPORT + default y + +config SPL_MMC_SUPPORT + default y if MMC_SDHCI_ZYNQ + +config SPL_SERIAL_SUPPORT + default y + +config SPL_SPI_FLASH_SUPPORT + default y if ZYNQ_QSPI + +config SPL_SPI_SUPPORT + default y if ZYNQ_QSPI + +config SYS_BOARD + default "zynqmp" + +config SYS_VENDOR + string "Vendor name" + default "xilinx" + +config SYS_SOC + default "zynqmp" + +config SYS_CONFIG_NAME + string "Board configuration name" + default "xilinx_zynqmp" + help + This option contains information about board configuration name. + Based on this option include/configs/<CONFIG_SYS_CONFIG_NAME>.h header + will be used for board configuration. + +config SYS_MEM_RSVD_FOR_MMU + bool "Reserve memory for MMU Table" + help + If defined this option is used to setup different space for + MMU table than the one which will be allocated during + relocation. + +config BOOT_INIT_FILE + string "boot.bin init register filename" + depends on SPL + default "" + help + Add register writes to boot.bin format (max 256 pairs). + Expect a table of register-value pairs, e.g. "0x12345678 0x4321" + +config PMUFW_INIT_FILE + string "PMU firmware" + depends on SPL + default "" + help + Include external PMUFW (Platform Management Unit FirmWare) to + a Xilinx bootable image (boot.bin). + +config ZYNQMP_SPL_PM_CFG_OBJ_FILE + string "PMU firmware configuration object to load at runtime by SPL" + depends on SPL + help + Path to a binary PMU firmware configuration object to be linked + into U-Boot SPL and loaded at runtime into the PMU firmware. + + The ZynqMP Power Management Unit (PMU) needs a configuration + object for most SoC peripherals to work. To have it loaded by + U-Boot SPL set here the file name (absolute path or relative to + the top source tree) of your configuration, which must be a + binary blob. It will be linked in the SPL binary and loaded + into the PMU firmware by U-Boot SPL during board + initialization. + + Leave this option empty if your PMU firmware has a hard-coded + configuration object or you are loading it by any other means. + +config ZYNQMP_USB + bool "Configure ZynqMP USB" + +config ZYNQMP_NO_DDR + bool "Disable DDR MMU mapping" + help + This option configures MMU with no DDR to avoid speculative + access to DDR memory where DDR is not present. + +config SYS_MALLOC_F_LEN + default 0x600 + +config DEFINE_TCM_OCM_MMAP + bool "Define TCM and OCM memory in MMU Table" + default y if MP + help + This option if enabled defines the TCM and OCM memory and its + memory attributes in MMU table entry. + +config ZYNQMP_PSU_INIT_ENABLED + bool "Include psu_init" + help + Include psu_init to full u-boot. SPL include psu_init by default. + +config SPL_ZYNQMP_ALT_BOOTMODE_ENABLED + bool "Overwrite SPL bootmode" + depends on SPL + help + Overwrite bootmode selected via boot mode pins to tell SPL what should + be the next boot device. + +config ZYNQ_SDHCI_MAX_FREQ + default 200000000 + +config SPL_ZYNQMP_ALT_BOOTMODE + hex + default 0x0 if JTAG_MODE + default 0x1 if QSPI_MODE_24BIT + default 0x2 if QSPI_MODE_32BIT + default 0x3 if SD_MODE + default 0x4 if NAND_MODE + default 0x5 if SD_MODE1 + default 0x6 if EMMC_MODE + default 0x7 if USB_MODE + default 0xa if SW_USBHOST_MODE + default 0xb if SW_SATA_MODE + default 0xe if SD1_LSHFT_MODE + +choice + prompt "Boot mode" + depends on SPL_ZYNQMP_ALT_BOOTMODE_ENABLED + default JTAG_MODE + +config JTAG_MODE + bool "JTAG_MODE" + +config QSPI_MODE_24BIT + bool "QSPI_MODE_24BIT" + +config QSPI_MODE_32BIT + bool "QSPI_MODE_32BIT" + +config SD_MODE + bool "SD_MODE" + +config SD_MODE1 + bool "SD_MODE1" + +config NAND_MODE + bool "NAND_MODE" + +config EMMC_MODE + bool "EMMC_MODE" + +config USB_MODE + bool "USB" + +config SW_USBHOST_MODE + bool "SW USBHOST_MODE" + +config SW_SATA_MODE + bool "SW SATA_MODE" + +config SD1_LSHFT_MODE + bool "SD1_LSHFT_MODE" + +endchoice + +source "board/xilinx/Kconfig" +source "board/xilinx/zynqmp/Kconfig" + +endif |