1 files changed, 121 insertions, 0 deletions
diff --git a/roms/u-boot/arch/arm/mach-zynqmp/spl.c b/roms/u-boot/arch/arm/mach-zynqmp/spl.c
new file mode 100644
index 000000000..88386b23e
--- /dev/null
+++ b/roms/u-boot/arch/arm/mach-zynqmp/spl.c
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2015 - 2016 Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+#include <common.h>
+#include <image.h>
+#include <init.h>
+#include <log.h>
+#include <spl.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/spl.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/psu_init_gpl.h>
+#include <asm/arch/sys_proto.h>
+
+void board_init_f(ulong dummy)
+{
+	board_early_init_f();
+	board_early_init_r();
+}
+
+static void ps_mode_reset(ulong mode)
+{
+	writel(mode << ZYNQMP_CRL_APB_BOOT_PIN_CTRL_OUT_EN_SHIFT,
+	       &crlapb_base->boot_pin_ctrl);
+	udelay(5);
+	writel(mode << ZYNQMP_CRL_APB_BOOT_PIN_CTRL_OUT_VAL_SHIFT |
+	       mode << ZYNQMP_CRL_APB_BOOT_PIN_CTRL_OUT_EN_SHIFT,
+	       &crlapb_base->boot_pin_ctrl);
+}
+
+/*
+ * Set default PS_MODE1 which is used for USB ULPI phy reset
+ * Also other resets can be connected to this certain pin
+ */
+#ifndef MODE_RESET
+# define MODE_RESET	PS_MODE1
+#endif
+
+#ifdef CONFIG_SPL_BOARD_INIT
+void spl_board_init(void)
+{
+	preloader_console_init();
+	ps_mode_reset(MODE_RESET);
+	board_init();
+	psu_post_config_data();
+}
+#endif
+
+void board_boot_order(u32 *spl_boot_list)
+{
+	spl_boot_list[0] = spl_boot_device();
+
+	if (spl_boot_list[0] == BOOT_DEVICE_MMC1)
+		spl_boot_list[1] = BOOT_DEVICE_MMC2;
+	if (spl_boot_list[0] == BOOT_DEVICE_MMC2)
+		spl_boot_list[1] = BOOT_DEVICE_MMC1;
+
+	spl_boot_list[2] = BOOT_DEVICE_RAM;
+}
+
+u32 spl_boot_device(void)
+{
+	u32 reg = 0;
+	u8 bootmode;
+
+#if defined(CONFIG_SPL_ZYNQMP_ALT_BOOTMODE_ENABLED)
+	/* Change default boot mode at run-time */
+	writel(CONFIG_SPL_ZYNQMP_ALT_BOOTMODE << BOOT_MODE_ALT_SHIFT,
+	       &crlapb_base->boot_mode);
+#endif
+
+	reg = readl(&crlapb_base->boot_mode);
+	if (reg >> BOOT_MODE_ALT_SHIFT)
+		reg >>= BOOT_MODE_ALT_SHIFT;
+
+	bootmode = reg & BOOT_MODES_MASK;
+
+	switch (bootmode) {
+	case JTAG_MODE:
+		return BOOT_DEVICE_RAM;
+#ifdef CONFIG_SPL_MMC_SUPPORT
+	case SD_MODE1:
+	case SD1_LSHFT_MODE: /* not working on silicon v1 */
+		return BOOT_DEVICE_MMC2;
+	case SD_MODE:
+	case EMMC_MODE:
+		return BOOT_DEVICE_MMC1;
+#endif
+#ifdef CONFIG_SPL_DFU
+	case USB_MODE:
+		return BOOT_DEVICE_DFU;
+#endif
+#ifdef CONFIG_SPL_SATA_SUPPORT
+	case SW_SATA_MODE:
+		return BOOT_DEVICE_SATA;
+#endif
+#ifdef CONFIG_SPL_SPI_SUPPORT
+	case QSPI_MODE_24BIT:
+	case QSPI_MODE_32BIT:
+		return BOOT_DEVICE_SPI;
+#endif
+	default:
+		printf("Invalid Boot Mode:0x%x\n", bootmode);
+		break;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_SPL_OS_BOOT
+int spl_start_uboot(void)
+{
+	return 0;
+}
+#endif