1 files changed, 115 insertions, 0 deletions
diff --git a/roms/u-boot/arch/powerpc/include/asm/mpc85xx_gpio.h b/roms/u-boot/arch/powerpc/include/asm/mpc85xx_gpio.h
new file mode 100644
index 000000000..feebe15ca
--- /dev/null
+++ b/roms/u-boot/arch/powerpc/include/asm/mpc85xx_gpio.h
@@ -0,0 +1,115 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2010 eXMeritus, A Boeing Company
+ */
+
+#ifndef POWERPC_ASM_MPC85XX_GPIO_H_
+#define POWERPC_ASM_MPC85XX_GPIO_H_
+
+#ifndef CONFIG_DM_GPIO
+# include <asm/immap_85xx.h>
+
+/*
+ * The following internal functions are an MPC85XX-specific GPIO API which
+ * allows setting and querying multiple GPIOs in a single operation.
+ *
+ * All of these look relatively large, but the arguments are almost always
+ * constants, so they compile down to just a few instructions and a
+ * memory-mapped IO operation or two.
+ */
+static inline void mpc85xx_gpio_set(unsigned int mask,
+		unsigned int dir, unsigned int val)
+{
+	ccsr_gpio_t *gpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
+
+	/* First mask off the unwanted parts of "dir" and "val" */
+	dir &= mask;
+	val &= mask;
+
+	/* Now read in the values we're supposed to preserve */
+	dir |= (in_be32(&gpio->gpdir) & ~mask);
+	val |= (in_be32(&gpio->gpdat) & ~mask);
+
+	/*
+	 * Poke the new output values first, then set the direction.  This
+	 * helps to avoid transient data when switching from input to output
+	 * and vice versa.
+	 */
+	out_be32(&gpio->gpdat, val);
+	out_be32(&gpio->gpdir, dir);
+}
+
+static inline void mpc85xx_gpio_set_in(unsigned int gpios)
+{
+	mpc85xx_gpio_set(gpios, 0x00000000, 0x00000000);
+}
+
+static inline void mpc85xx_gpio_set_low(unsigned int gpios)
+{
+	mpc85xx_gpio_set(gpios, 0xFFFFFFFF, 0x00000000);
+}
+
+static inline void mpc85xx_gpio_set_high(unsigned int gpios)
+{
+	mpc85xx_gpio_set(gpios, 0xFFFFFFFF, 0xFFFFFFFF);
+}
+
+static inline unsigned int mpc85xx_gpio_get(unsigned int mask)
+{
+	ccsr_gpio_t *gpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
+
+	/* Read the requested values */
+	return in_be32(&gpio->gpdat) & mask;
+}
+
+/*
+ * These implement the generic Linux GPIO API on top of the other functions
+ * in this header.
+ */
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+	/* Compatibility shim */
+	return 0;
+}
+
+static inline int gpio_free(unsigned gpio)
+{
+	/* Compatibility shim */
+	return 0;
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+	mpc85xx_gpio_set_in(1U << gpio);
+	return 0;
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+	if (value)
+		mpc85xx_gpio_set_high(1U << gpio);
+	else
+		mpc85xx_gpio_set_low(1U << gpio);
+	return 0;
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	return !!mpc85xx_gpio_get(1U << gpio);
+}
+
+static inline int gpio_set_value(unsigned gpio, int value)
+{
+	if (value)
+		mpc85xx_gpio_set_high(1U << gpio);
+	else
+		mpc85xx_gpio_set_low(1U << gpio);
+	return 0;
+}
+
+static inline int gpio_is_valid(int gpio)
+{
+	return (gpio >= 0) && (gpio < 32);
+}
+#endif /* not CONFIG_DM_GPIO */
+#endif /* not POWERPC_ASM_MPC85XX_GPIO_H_ */