diff options
Diffstat (limited to 'roms/u-boot/arch/x86/include/asm/io.h')
| -rw-r--r-- | roms/u-boot/arch/x86/include/asm/io.h | 312 |
1 files changed, 312 insertions, 0 deletions
diff --git a/roms/u-boot/arch/x86/include/asm/io.h b/roms/u-boot/arch/x86/include/asm/io.h new file mode 100644 index 000000000..83dc09757 --- /dev/null +++ b/roms/u-boot/arch/x86/include/asm/io.h @@ -0,0 +1,312 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2000-2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + */ + +#ifndef _ASM_IO_H +#define _ASM_IO_H + +#include <compiler.h> + +/* + * This file contains the definitions for the x86 IO instructions + * inb/inw/inl/outb/outw/outl and the "string versions" of the same + * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing" + * versions of the single-IO instructions (inb_p/inw_p/..). + * + * This file is not meant to be obfuscating: it's just complicated + * to (a) handle it all in a way that makes gcc able to optimize it + * as well as possible and (b) trying to avoid writing the same thing + * over and over again with slight variations and possibly making a + * mistake somewhere. + */ + +/* + * Thanks to James van Artsdalen for a better timing-fix than + * the two short jumps: using outb's to a nonexistent port seems + * to guarantee better timings even on fast machines. + * + * On the other hand, I'd like to be sure of a non-existent port: + * I feel a bit unsafe about using 0x80 (should be safe, though) + * + * Linus + */ + + /* + * Bit simplified and optimized by Jan Hubicka + * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999. + * + * isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added, + * isa_read[wl] and isa_write[wl] fixed + * - Arnaldo Carvalho de Melo <acme@conectiva.com.br> + */ + +#define IO_SPACE_LIMIT 0xffff + +#include <asm/types.h> + + +#ifdef __KERNEL__ + + +/* + * readX/writeX() are used to access memory mapped devices. On some + * architectures the memory mapped IO stuff needs to be accessed + * differently. On the x86 architecture, we just read/write the + * memory location directly. + */ + +#define readb(addr) (*(volatile u8 *)(uintptr_t)(addr)) +#define readw(addr) (*(volatile u16 *)(uintptr_t)(addr)) +#define readl(addr) (*(volatile u32 *)(uintptr_t)(addr)) +#define readq(addr) (*(volatile u64 *)(uintptr_t)(addr)) +#define __raw_readb readb +#define __raw_readw readw +#define __raw_readl readl +#define __raw_readq readq + +#define writeb(b, addr) (*(volatile u8 *)(addr) = (b)) +#define writew(b, addr) (*(volatile u16 *)(addr) = (b)) +#define writel(b, addr) (*(volatile u32 *)(addr) = (b)) +#define writeq(b, addr) (*(volatile u64 *)(addr) = (b)) +#define __raw_writeb writeb +#define __raw_writew writew +#define __raw_writel writel +#define __raw_writeq writeq + +#define memset_io(a,b,c) memset((a),(b),(c)) +#define memcpy_fromio(a,b,c) memcpy((a),(b),(c)) +#define memcpy_toio(a,b,c) memcpy((a),(b),(c)) + +#define out_arch(type, endian, a, v) __raw_write##type(cpu_to_##endian(v), a) +#define in_arch(type, endian, a) endian##_to_cpu(__raw_read##type(a)) + +#define out_le64(a, v) out_arch(q, le64, a, v) +#define out_le32(a, v) out_arch(l, le32, a, v) +#define out_le16(a, v) out_arch(w, le16, a, v) + +#define in_le64(a) in_arch(q, le64, a) +#define in_le32(a) in_arch(l, le32, a) +#define in_le16(a) in_arch(w, le16, a) + +#define out_be32(a, v) out_arch(l, be32, a, v) +#define out_be16(a, v) out_arch(w, be16, a, v) + +#define in_be32(a) in_arch(l, be32, a) +#define in_be16(a) in_arch(w, be16, a) + +#define out_8(a, v) __raw_writeb(v, a) +#define in_8(a) __raw_readb(a) + +#define clrbits(type, addr, clear) \ + out_##type((addr), in_##type(addr) & ~(clear)) + +#define setbits(type, addr, set) \ + out_##type((addr), in_##type(addr) | (set)) + +#define clrsetbits(type, addr, clear, set) \ + out_##type((addr), (in_##type(addr) & ~(clear)) | (set)) + +#define clrbits_be32(addr, clear) clrbits(be32, addr, clear) +#define setbits_be32(addr, set) setbits(be32, addr, set) +#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set) + +#define clrbits_le32(addr, clear) clrbits(le32, addr, clear) +#define setbits_le32(addr, set) setbits(le32, addr, set) +#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set) + +#define clrbits_be16(addr, clear) clrbits(be16, addr, clear) +#define setbits_be16(addr, set) setbits(be16, addr, set) +#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set) + +#define clrbits_le16(addr, clear) clrbits(le16, addr, clear) +#define setbits_le16(addr, set) setbits(le16, addr, set) +#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set) + +#define clrbits_8(addr, clear) clrbits(8, addr, clear) +#define setbits_8(addr, set) setbits(8, addr, set) +#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set) + +#endif /* __KERNEL__ */ + +#ifdef SLOW_IO_BY_JUMPING +#define __SLOW_DOWN_IO "\njmp 1f\n1:\tjmp 1f\n1:" +#else +#define __SLOW_DOWN_IO "\noutb %%al,$0xed" +#endif + +#ifdef REALLY_SLOW_IO +#define __FULL_SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO +#else +#define __FULL_SLOW_DOWN_IO __SLOW_DOWN_IO +#endif + + +/* + * Talk about misusing macros.. + */ +#define __OUT1(s,x) \ +static inline void _out##s(unsigned x value, unsigned short port) { + +#define __OUT2(s,s1,s2) \ +__asm__ __volatile__ ("out" #s " %" s1 "0,%" s2 "1" + + +#define __OUT(s,s1,x) \ +__OUT1(s,x) __OUT2(s,s1,"w") : : "a" (value), "Nd" (port)); } \ +__OUT1(s##_p,x) __OUT2(s,s1,"w") __FULL_SLOW_DOWN_IO : : "a" (value), "Nd" (port));} + +#define __IN1(s) \ +static inline RETURN_TYPE _in##s(unsigned short port) { RETURN_TYPE _v; + +#define __IN2(s,s1,s2) \ +__asm__ __volatile__ ("in" #s " %" s2 "1,%" s1 "0" + +#define __IN(s,s1,i...) \ +__IN1(s) __IN2(s,s1,"w") : "=a" (_v) : "Nd" (port) ,##i ); return _v; } \ +__IN1(s##_p) __IN2(s,s1,"w") __FULL_SLOW_DOWN_IO : "=a" (_v) : "Nd" (port) ,##i ); return _v; } + +#define __INS(s) \ +static inline void ins##s(unsigned short port, void * addr, unsigned long count) \ +{ __asm__ __volatile__ ("rep ; ins" #s \ +: "=D" (addr), "=c" (count) : "d" (port),"0" (addr),"1" (count)); } + +#define __OUTS(s) \ +static inline void outs##s(unsigned short port, const void * addr, unsigned long count) \ +{ __asm__ __volatile__ ("rep ; outs" #s \ +: "=S" (addr), "=c" (count) : "d" (port),"0" (addr),"1" (count)); } + +#define RETURN_TYPE unsigned char +__IN(b,"") +#undef RETURN_TYPE +#define RETURN_TYPE unsigned short +__IN(w,"") +#undef RETURN_TYPE +#define RETURN_TYPE unsigned int +__IN(l,"") +#undef RETURN_TYPE + +#define inb(port) _inb((uintptr_t)(port)) +#define inw(port) _inw((uintptr_t)(port)) +#define inl(port) _inl((uintptr_t)(port)) + +__OUT(b,"b",char) +__OUT(w,"w",short) +__OUT(l,,int) + +#define outb(val, port) _outb(val, (uintptr_t)(port)) +#define outw(val, port) _outw(val, (uintptr_t)(port)) +#define outl(val, port) _outl(val, (uintptr_t)(port)) + +__INS(b) +__INS(w) +__INS(l) + +__OUTS(b) +__OUTS(w) +__OUTS(l) + +/* IO space accessors */ +#define clrio(type, addr, clear) \ + out##type(in##type(addr) & ~(clear), (addr)) + +#define setio(type, addr, set) \ + out##type(in##type(addr) | (set), (addr)) + +#define clrsetio(type, addr, clear, set) \ + out##type((in##type(addr) & ~(clear)) | (set), (addr)) + +#define clrio_32(addr, clear) clrio(l, addr, clear) +#define clrio_16(addr, clear) clrio(w, addr, clear) +#define clrio_8(addr, clear) clrio(b, addr, clear) + +#define setio_32(addr, set) setio(l, addr, set) +#define setio_16(addr, set) setio(w, addr, set) +#define setio_8(addr, set) setio(b, addr, set) + +#define clrsetio_32(addr, clear, set) clrsetio(l, addr, clear, set) +#define clrsetio_16(addr, clear, set) clrsetio(w, addr, clear, set) +#define clrsetio_8(addr, clear, set) clrsetio(b, addr, clear, set) + +static inline void sync(void) +{ +} + +/* + * TODO: The kernel offers some more advanced versions of barriers, it might + * have some advantages to use them instead of the simple one here. + */ +#define dmb() __asm__ __volatile__ ("" : : : "memory") +#define __iormb() dmb() +#define __iowmb() dmb() + +/* + * Read/write from/to an (offsettable) iomem cookie. It might be a PIO + * access or a MMIO access, these functions don't care. The info is + * encoded in the hardware mapping set up by the mapping functions + * (or the cookie itself, depending on implementation and hw). + * + * The generic routines don't assume any hardware mappings, and just + * encode the PIO/MMIO as part of the cookie. They coldly assume that + * the MMIO IO mappings are not in the low address range. + * + * Architectures for which this is not true can't use this generic + * implementation and should do their own copy. + */ + +/* + * We assume that all the low physical PIO addresses (0-0xffff) always + * PIO. That means we can do some sanity checks on the low bits, and + * don't need to just take things for granted. + */ +#define PIO_RESERVED 0x10000UL + +/* + * Ugly macros are a way of life. + */ +#define IO_COND(addr, is_pio, is_mmio) do { \ + unsigned long port = (unsigned long __force)addr; \ + if (port >= PIO_RESERVED) { \ + is_mmio; \ + } else { \ + is_pio; \ + } \ +} while (0) + +static inline u8 ioread8(const volatile void __iomem *addr) +{ + IO_COND(addr, return inb(port), return readb(addr)); + return 0xff; +} + +static inline u16 ioread16(const volatile void __iomem *addr) +{ + IO_COND(addr, return inw(port), return readw(addr)); + return 0xffff; +} + +static inline u32 ioread32(const volatile void __iomem *addr) +{ + IO_COND(addr, return inl(port), return readl(addr)); + return 0xffffffff; +} + +static inline void iowrite8(u8 value, volatile void __iomem *addr) +{ + IO_COND(addr, outb(value, port), writeb(value, addr)); +} + +static inline void iowrite16(u16 value, volatile void __iomem *addr) +{ + IO_COND(addr, outw(value, port), writew(value, addr)); +} + +static inline void iowrite32(u32 value, volatile void __iomem *addr) +{ + IO_COND(addr, outl(value, port), writel(value, addr)); +} + +#include <asm-generic/io.h> + +#endif /* _ASM_IO_H */ |