1 files changed, 110 insertions, 0 deletions
diff --git a/roms/u-boot/doc/board/xilinx/zynq.rst b/roms/u-boot/doc/board/xilinx/zynq.rst
new file mode 100644
index 000000000..438912fe4
--- /dev/null
+++ b/roms/u-boot/doc/board/xilinx/zynq.rst
@@ -0,0 +1,110 @@
+.. SPDX-License-Identifier: GPL-2.0+
+..  (C) Copyright 2013 Xilinx, Inc.
+
+ZYNQ
+====
+
+About this
+----------
+
+This document describes the information about Xilinx Zynq U-Boot -
+like supported boards, ML status and TODO list.
+
+Zynq boards
+-----------
+
+Xilinx Zynq-7000 All Programmable SoCs enable extensive system level
+differentiation, integration, and flexibility through hardware, software,
+and I/O programmability.
+
+* zc702 (single qspi, gem0, mmc) [1]
+* zc706 (dual parallel qspi, gem0, mmc) [2]
+* zed (single qspi, gem0, mmc) [3]
+* microzed (single qspi, gem0, mmc) [4]
+* zc770
+     - zc770-xm010 (single qspi, gem0, mmc)
+     - zc770-xm011 (8 or 16 bit nand)
+     - zc770-xm012 (nor)
+     - zc770-xm013 (dual parallel qspi, gem1)
+
+Building
+--------
+
+configure and build for zc702 board::
+
+   $ export DEVICE_TREE=zynq-zc702
+   $ make xilinx_zynq_virt_defconfig
+   $ make
+
+Bootmode
+--------
+
+Zynq has a facility to read the bootmode from the slcr bootmode register
+once user is setting through jumpers on the board - see page no:1546 on [5]
+
+All possible bootmode values are defined in Table 6-2:Boot_Mode MIO Pins
+on [5].
+
+board_late_init() will read the bootmode values using slcr bootmode register
+at runtime and assign the modeboot variable to specific bootmode string which
+is intern used in autoboot.
+
+SLCR bootmode register Bit[3:0] values
+
+.. code-block:: c
+
+   #define ZYNQ_BM_NOR		0x02
+   #define ZYNQ_BM_SD		0x05
+   #define ZYNQ_BM_JTAG		0x0
+
+"modeboot" variable can assign any of "norboot", "sdboot" or "jtagboot"
+bootmode strings at runtime.
+
+Flashing
+--------
+
+SD Card
+^^^^^^^
+
+To write an image that boots from a SD card first create a FAT32 partition
+and a FAT32 filesystem on the SD card::
+
+        sudo fdisk /dev/sdx
+        sudo mkfs.vfat -F 32 /dev/sdx1
+
+Mount the SD card and copy the SPL and U-Boot to the root directory of the
+SD card::
+
+        sudo mount -t vfat /dev/sdx1 /mnt
+        sudo cp spl/boot.bin /mnt
+        sudo cp u-boot.img /mnt
+
+Mainline status
+---------------
+
+- Added basic board configurations support.
+- Added zynq u-boot bsp code - arch/arm/mach-zynq
+- Added zynq boards named - zc70x, zed, microzed, zc770_xm010/xm011/xm012/xm013
+- Added zynq drivers:
+
+  :serial: drivers/serial/serial_zynq.c
+  :net: drivers/net/zynq_gem.c
+  :mmc: drivers/mmc/zynq_sdhci.c
+  :spi: drivers/spi/zynq_spi.c
+  :qspi: drivers/spi/zynq_qspi.c
+  :i2c: drivers/i2c/zynq_i2c.c
+  :nand: drivers/mtd/nand/raw/zynq_nand.c
+
+- Done proper cleanups on board configurations
+- Added basic FDT support for zynq boards
+- d-cache support for zynq_gem.c
+
+* [1] http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC702-G.htm
+* [2] http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC706-G.htm
+* [3] http://zedboard.org/product/zedboard
+* [4] http://zedboard.org/product/microzed
+* [5] http://www.xilinx.com/support/documentation/user_guides/ug585-Zynq-7000-TRM.pdf
+
+
+.. Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
+.. Sun Dec 15 14:52:41 IST 2013