diff options
Diffstat (limited to 'roms/u-boot/drivers/crypto/ace_sha.c')
| -rw-r--r-- | roms/u-boot/drivers/crypto/ace_sha.c | 185 |
1 files changed, 185 insertions, 0 deletions
diff --git a/roms/u-boot/drivers/crypto/ace_sha.c b/roms/u-boot/drivers/crypto/ace_sha.c new file mode 100644 index 000000000..261d3efe8 --- /dev/null +++ b/roms/u-boot/drivers/crypto/ace_sha.c @@ -0,0 +1,185 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Advanced Crypto Engine - SHA Firmware + * Copyright (c) 2012 Samsung Electronics + */ +#include <common.h> +#include "ace_sha.h" +#include <log.h> +#include <rand.h> + +#ifdef CONFIG_SHA_HW_ACCEL +#include <u-boot/sha256.h> +#include <u-boot/sha1.h> +#include <linux/errno.h> + +/* SHA1 value for the message of zero length */ +static const unsigned char sha1_digest_emptymsg[SHA1_SUM_LEN] = { + 0xDA, 0x39, 0xA3, 0xEE, 0x5E, 0x6B, 0x4B, 0x0D, + 0x32, 0x55, 0xBF, 0xFF, 0x95, 0x60, 0x18, 0x90, + 0xAF, 0xD8, 0x07, 0x09}; + +/* SHA256 value for the message of zero length */ +static const unsigned char sha256_digest_emptymsg[SHA256_SUM_LEN] = { + 0xE3, 0xB0, 0xC4, 0x42, 0x98, 0xFC, 0x1C, 0x14, + 0x9A, 0xFB, 0xF4, 0xC8, 0x99, 0x6F, 0xB9, 0x24, + 0x27, 0xAE, 0x41, 0xE4, 0x64, 0x9B, 0x93, 0x4C, + 0xA4, 0x95, 0x99, 0x1B, 0x78, 0x52, 0xB8, 0x55}; + +int ace_sha_hash_digest(const unsigned char *pbuf, unsigned int buf_len, + unsigned char *pout, unsigned int hash_type) +{ + unsigned int i, reg, len; + unsigned int *pdigest; + struct exynos_ace_sfr *ace_sha_reg = + (struct exynos_ace_sfr *)samsung_get_base_ace_sfr(); + + if (buf_len == 0) { + /* ACE H/W cannot compute hash value for empty string */ + if (hash_type == ACE_SHA_TYPE_SHA1) + memcpy(pout, sha1_digest_emptymsg, SHA1_SUM_LEN); + else + memcpy(pout, sha256_digest_emptymsg, SHA256_SUM_LEN); + return 0; + } + + /* Flush HRDMA */ + writel(ACE_FC_HRDMACFLUSH_ON, &ace_sha_reg->fc_hrdmac); + writel(ACE_FC_HRDMACFLUSH_OFF, &ace_sha_reg->fc_hrdmac); + + /* Set byte swap of data in */ + writel(ACE_HASH_SWAPDI_ON | ACE_HASH_SWAPDO_ON | ACE_HASH_SWAPIV_ON, + &ace_sha_reg->hash_byteswap); + + /* Select Hash input mux as external source */ + reg = readl(&ace_sha_reg->fc_fifoctrl); + reg = (reg & ~ACE_FC_SELHASH_MASK) | ACE_FC_SELHASH_EXOUT; + writel(reg, &ace_sha_reg->fc_fifoctrl); + + /* Set Hash as SHA1 or SHA256 and start Hash engine */ + reg = (hash_type == ACE_SHA_TYPE_SHA1) ? + ACE_HASH_ENGSEL_SHA1HASH : ACE_HASH_ENGSEL_SHA256HASH; + reg |= ACE_HASH_STARTBIT_ON; + writel(reg, &ace_sha_reg->hash_control); + + /* Enable FIFO mode */ + writel(ACE_HASH_FIFO_ON, &ace_sha_reg->hash_fifo_mode); + + /* Set message length */ + writel(buf_len, &ace_sha_reg->hash_msgsize_low); + writel(0, &ace_sha_reg->hash_msgsize_high); + + /* Set HRDMA */ + writel((unsigned int)pbuf, &ace_sha_reg->fc_hrdmas); + writel(buf_len, &ace_sha_reg->fc_hrdmal); + + while ((readl(&ace_sha_reg->hash_status) & ACE_HASH_MSGDONE_MASK) == + ACE_HASH_MSGDONE_OFF) { + /* + * PRNG error bit goes HIGH if a PRNG request occurs without + * a complete seed setup. We are using this bit to check h/w + * fault because proper setup is not expected in that case. + */ + if ((readl(&ace_sha_reg->hash_status) + & ACE_HASH_PRNGERROR_MASK) == ACE_HASH_PRNGERROR_ON) + return -EBUSY; + } + + /* Clear MSG_DONE bit */ + writel(ACE_HASH_MSGDONE_ON, &ace_sha_reg->hash_status); + + /* Read hash result */ + pdigest = (unsigned int *)pout; + len = (hash_type == ACE_SHA_TYPE_SHA1) ? SHA1_SUM_LEN : SHA256_SUM_LEN; + + for (i = 0; i < len / 4; i++) + pdigest[i] = readl(&ace_sha_reg->hash_result[i]); + + /* Clear HRDMA pending bit */ + writel(ACE_FC_HRDMA, &ace_sha_reg->fc_intpend); + + return 0; +} + +void hw_sha256(const unsigned char *pbuf, unsigned int buf_len, + unsigned char *pout, unsigned int chunk_size) +{ + if (ace_sha_hash_digest(pbuf, buf_len, pout, ACE_SHA_TYPE_SHA256)) + debug("ACE was not setup properly or it is faulty\n"); +} + +void hw_sha1(const unsigned char *pbuf, unsigned int buf_len, + unsigned char *pout, unsigned int chunk_size) +{ + if (ace_sha_hash_digest(pbuf, buf_len, pout, ACE_SHA_TYPE_SHA1)) + debug("ACE was not setup properly or it is faulty\n"); +} +#endif /* CONFIG_SHA_HW_ACCEL */ + +#ifdef CONFIG_LIB_HW_RAND +static unsigned int seed_done; + +void srand(unsigned int seed) +{ + struct exynos_ace_sfr *reg = + (struct exynos_ace_sfr *)samsung_get_base_ace_sfr(); + int i, status; + + /* Seed data */ + for (i = 0; i < ACE_HASH_PRNG_REG_NUM; i++) + writel(seed << i, ®->hash_seed[i]); + + /* Wait for seed setup done */ + while (1) { + status = readl(®->hash_status); + if ((status & ACE_HASH_SEEDSETTING_MASK) || + (status & ACE_HASH_PRNGERROR_MASK)) + break; + } + + seed_done = 1; +} + +unsigned int rand(void) +{ + struct exynos_ace_sfr *reg = + (struct exynos_ace_sfr *)samsung_get_base_ace_sfr(); + int i, status; + unsigned int seed = (unsigned int)&status; + unsigned int ret = 0; + + if (!seed_done) + srand(seed); + + /* Start PRNG */ + writel(ACE_HASH_ENGSEL_PRNG | ACE_HASH_STARTBIT_ON, ®->hash_control); + + /* Wait for PRNG done */ + while (1) { + status = readl(®->hash_status); + if (status & ACE_HASH_PRNGDONE_MASK) + break; + if (status & ACE_HASH_PRNGERROR_MASK) { + seed_done = 0; + return 0; + } + } + + /* Clear Done IRQ */ + writel(ACE_HASH_PRNGDONE_MASK, ®->hash_status); + + /* Read a PRNG result */ + for (i = 0; i < ACE_HASH_PRNG_REG_NUM; i++) + ret += readl(®->hash_prng[i]); + + seed_done = 0; + return ret; +} + +unsigned int rand_r(unsigned int *seedp) +{ + srand(*seedp); + + return rand(); +} +#endif /* CONFIG_LIB_HW_RAND */ |