diff options
Diffstat (limited to 'roms/u-boot/drivers/mmc/Kconfig')
| -rw-r--r-- | roms/u-boot/drivers/mmc/Kconfig | 839 |
1 files changed, 839 insertions, 0 deletions
diff --git a/roms/u-boot/drivers/mmc/Kconfig b/roms/u-boot/drivers/mmc/Kconfig new file mode 100644 index 000000000..0909f502a --- /dev/null +++ b/roms/u-boot/drivers/mmc/Kconfig @@ -0,0 +1,839 @@ +menu "MMC Host controller Support" + +config MMC + bool "MMC/SD/SDIO card support" + default ARM || PPC || SANDBOX + select HAVE_BLOCK_DEVICE + select DM_MMC if DM + help + This selects MultiMediaCard, Secure Digital and Secure + Digital I/O support. + + If you want MMC/SD/SDIO support, you should say Y here and + also to your specific host controller driver. + +config MMC_WRITE + bool "support for MMC/SD write operations" + depends on MMC + default y + help + Enable write access to MMC and SD Cards + +config MMC_PWRSEQ + bool "HW reset support for eMMC" + depends on PWRSEQ + help + Ths select Hardware reset support aka pwrseq-emmc for eMMC + devices. + +config MMC_BROKEN_CD + bool "Poll for broken card detection case" + help + If card detection feature is broken, just poll to detect. + +config DM_MMC + bool "Enable MMC controllers using Driver Model" + depends on DM + select BLK + help + This enables the MultiMediaCard (MMC) uclass which supports MMC and + Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.) + and non-removable (e.g. eMMC chip) devices are supported. These + appear as block devices in U-Boot and can support filesystems such + as EXT4 and FAT. + +config SPL_DM_MMC + bool "Enable MMC controllers using Driver Model in SPL" + depends on SPL_DM && DM_MMC + default y + help + This enables the MultiMediaCard (MMC) uclass which supports MMC and + Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.) + and non-removable (e.g. eMMC chip) devices are supported. These + appear as block devices in U-Boot and can support filesystems such + as EXT4 and FAT. + +if MMC + +config MMC_SDHCI_ADMA_HELPERS + bool + +config MMC_SPI + bool "Support for SPI-based MMC controller" + depends on DM_MMC && DM_SPI + help + This selects SPI-based MMC controllers. + If you have an MMC controller on a SPI bus, say Y here. + + If unsure, say N. + +config MMC_SPI_CRC_ON + bool "Support CRC for SPI-based MMC controller" + depends on MMC_SPI + default y + help + This enables CRC for SPI-based MMC controllers. + + If unsure, say N. + +config ARM_PL180_MMCI + bool "ARM AMBA Multimedia Card Interface and compatible support" + help + This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card + Interface (PL180, PL181 and compatible) support. + If you have an ARM(R) platform with a Multimedia Card slot, + say Y or M here. + +config MMC_QUIRKS + bool "Enable quirks" + default y + help + Some cards and hosts may sometimes behave unexpectedly (quirks). + This option enable workarounds to handle those quirks. Some of them + are enabled by default, other may require additional flags or are + enabled by the host driver. + +config MMC_HW_PARTITIONING + bool "Support for HW partitioning command(eMMC)" + default y + help + This adds a command and an API to do hardware partitioning on eMMC + devices. + +config SUPPORT_EMMC_RPMB + bool "Support eMMC replay protected memory block (RPMB)" + imply CMD_MMC_RPMB + help + Enable support for reading, writing and programming the + key for the Replay Protection Memory Block partition in eMMC. + +config SUPPORT_EMMC_BOOT + bool "Support some additional features of the eMMC boot partitions" + help + Enable support for eMMC boot partitions. This also enables + extensions within the mmc command. + +config MMC_IO_VOLTAGE + bool "Support IO voltage configuration" + help + IO voltage configuration allows selecting the voltage level of the IO + lines (not the level of main supply). This is required for UHS + support. For eMMC this not mandatory, but not enabling this option may + prevent the driver of using the faster modes. + +config SPL_MMC_IO_VOLTAGE + bool "Support IO voltage configuration in SPL" + default n + help + IO voltage configuration allows selecting the voltage level of the IO + lines (not the level of main supply). This is required for UHS + support. For eMMC this not mandatory, but not enabling this option may + prevent the driver of using the faster modes. + +config MMC_UHS_SUPPORT + bool "enable UHS support" + depends on MMC_IO_VOLTAGE + help + The Ultra High Speed (UHS) bus is available on some SDHC and SDXC + cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus + frequency can go up to 208MHz (SDR104) + +config SPL_MMC_UHS_SUPPORT + bool "enable UHS support in SPL" + depends on SPL_MMC_IO_VOLTAGE + help + The Ultra High Speed (UHS) bus is available on some SDHC and SDXC + cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus + frequency can go up to 208MHz (SDR104) + +config MMC_HS400_ES_SUPPORT + bool "enable HS400 Enhanced Strobe support" + help + The HS400 Enhanced Strobe mode is support by some eMMC. The bus + frequency is up to 200MHz. This mode does not tune the IO. + +config SPL_MMC_HS400_ES_SUPPORT + bool "enable HS400 Enhanced Strobe support in SPL" + help + The HS400 Enhanced Strobe mode is support by some eMMC. The bus + frequency is up to 200MHz. This mode does not tune the IO. + +config MMC_HS400_SUPPORT + bool "enable HS400 support" + select MMC_HS200_SUPPORT + help + The HS400 mode is support by some eMMC. The bus frequency is up to + 200MHz. This mode requires tuning the IO. + +config SPL_MMC_HS400_SUPPORT + bool "enable HS400 support in SPL" + select SPL_MMC_HS200_SUPPORT + help + The HS400 mode is support by some eMMC. The bus frequency is up to + 200MHz. This mode requires tuning the IO. + +config MMC_HS200_SUPPORT + bool "enable HS200 support" + help + The HS200 mode is support by some eMMC. The bus frequency is up to + 200MHz. This mode requires tuning the IO. + +config SPL_MMC_HS200_SUPPORT + bool "enable HS200 support in SPL" + help + The HS200 mode is support by some eMMC. The bus frequency is up to + 200MHz. This mode requires tuning the IO. + +config MMC_VERBOSE + bool "Output more information about the MMC" + default y + help + Enable the output of more information about the card such as the + operating mode. + +config MMC_TRACE + bool "MMC debugging" + default n + help + This is an option for use by developer. Enable MMC core debugging. + + If you need to see the MMC core message, say Y. + +config MMC_DAVINCI + bool "TI DAVINCI Multimedia Card Interface support" + depends on ARCH_DAVINCI + default y + help + This selects the TI DAVINCI Multimedia card Interface. + If you have an DAVINCI board with a Multimedia Card slot, + say Y here. If unsure, say N. + +config MMC_DW + bool "Synopsys DesignWare Memory Card Interface" + select BOUNCE_BUFFER + help + This selects support for the Synopsys DesignWare Mobile Storage IP + block, this provides host support for SD and MMC interfaces, in both + PIO, internal DMA mode and external DMA mode. + +config MMC_DW_CORTINA + bool "Cortina specific extensions for Synopsys DW Memory Card Interface" + depends on DM_MMC + depends on MMC_DW + depends on BLK + default n + help + This selects support for Cortina SoC specific extensions to the + Synopsys DesignWare Memory Card Interface driver. Select this option + for platforms based on Cortina CAxxxx Soc's. + +config MMC_DW_EXYNOS + bool "Exynos specific extensions for Synopsys DW Memory Card Interface" + depends on ARCH_EXYNOS + depends on MMC_DW + default y + help + This selects support for Samsung Exynos SoC specific extensions to the + Synopsys DesignWare Memory Card Interface driver. Select this option + for platforms based on Exynos4 and Exynos5 SoC's. + +config MMC_DW_K3 + bool "K3 specific extensions for Synopsys DW Memory Card Interface" + depends on MMC_DW + help + This selects support for Hisilicon K3 SoC specific extensions to the + Synopsys DesignWare Memory Card Interface driver. Select this option + for platforms based on Hisilicon K3 SoC's. + +config MMC_DW_ROCKCHIP + bool "Rockchip SD/MMC controller support" + depends on DM_MMC && OF_CONTROL + depends on MMC_DW + help + This enables support for the Rockchip SD/MMM controller, which is + based on Designware IP. The device is compatible with at least + SD 3.0, SDIO 3.0 and MMC 4.5 and supports common eMMC chips as well + as removeable SD and micro-SD cards. + +config MMC_DW_SOCFPGA + bool "SOCFPGA specific extensions for Synopsys DW Memory Card Interface" + depends on ARCH_SOCFPGA + depends on MMC_DW + default y + help + This selects support for Altera SOCFPGA specific extensions to the + Synopsys DesignWare Memory Card Interface driver. Select this option + for platforms based on Altera SOCFPGA. + +config MMC_DW_SNPS + bool "Extensions for DW Memory Card Interface used in Synopsys ARC devboards" + depends on MMC_DW + depends on DM_MMC + depends on OF_CONTROL + depends on CLK + help + This selects support for Synopsys DesignWare Memory Card Interface driver + extensions used in various Synopsys ARC devboards. + +config NEXELL_DWMMC + bool "Nexell SD/MMC controller support" + depends on ARCH_NEXELL + depends on MMC_DW + depends on DM_MMC + depends on PINCTRL_NEXELL + default y + +config MMC_MESON_GX + bool "Meson GX EMMC controller support" + depends on DM_MMC && BLK && ARCH_MESON + help + Support for EMMC host controller on Meson GX ARM SoCs platform (S905) + +config MMC_MXC + bool "Freescale i.MX21/27/31 or MPC512x Multimedia Card support" + help + This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x + Multimedia Card Interface. If you have an i.MX or MPC512x platform + with a Multimedia Card slot, say Y here. + + If unsure, say N. + +config MMC_MXS + bool "Freescale MXS Multimedia Card Interface support" + depends on MX23 || MX28 || MX6 || MX7 + select BOUNCE_BUFFER + select APBH_DMA + select APBH_DMA_BURST if ARCH_MX6 || ARCH_MX7 + select APBH_DMA_BURST8 if ARCH_MX6 || ARCH_MX7 + help + This selects the Freescale SSP MMC controller found on MXS based + platforms like mx23/28. + + If unsure, say N. + +config MMC_PCI + bool "Support for MMC controllers on PCI" + depends on MMC_SDHCI + help + This selects PCI-based MMC controllers. + If you have an MMC controller on a PCI bus, say Y here. + +config MMC_OCTEONTX + bool "Marvell Octeon Multimedia Card Interface support" + depends on (ARCH_OCTEON || ARCH_OCTEONTX || ARCH_OCTEONTX2) + depends on DM_MMC + help + This selects the Octeon Multimedia card Interface. + If you have an OcteonTX/TX2 or MIPS Octeon board with a + Multimedia Card slot, say Y here. + + If unsure, say N. + +config MVEBU_MMC + bool "Kirkwood MMC controller support" + depends on DM_MMC && BLK && ARCH_KIRKWOOD + help + Support for MMC host controller on Kirkwood SoCs. + If you are on a Kirkwood architecture, say Y here. + + If unsure, say N. + +config PXA_MMC_GENERIC + bool "Support for MMC controllers on PXA" + help + This selects MMC controllers on PXA. + If you are on a PXA architecture, say Y here. + + If unsure, say N. + +config MMC_OMAP_HS + bool "TI OMAP High Speed Multimedia Card Interface support" + select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR + select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR + help + This selects the TI OMAP High Speed Multimedia card Interface. + If you have an omap2plus board with a Multimedia Card slot, + say Y here. + + If unsure, say N. + +config MMC_OMAP_HS_ADMA + bool "ADMA support for OMAP HS MMC" + depends on MMC_OMAP_HS && !OMAP34XX + default y if !AM33XX + help + This enables support for the ADMA2 controller (SDA3.00 Part A2 DMA + controller). If supported by the hardware, selecting this option will + increase performances. + +config MMC_OMAP36XX_PINS + bool "Enable MMC1 on OMAP36xx/37xx" + depends on OMAP34XX && MMC_OMAP_HS + help + This enables extended-drain in the MMC/SD/SDIO1I/O and + GPIO-associated I/O cells (gpio_126, gpio_127, and gpio_129) + specific to the OMAP36xx/37xx using MMC1 + + If you have a controller with this interface, say Y here. + + If unsure, say N. + +config SH_SDHI + bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support" + depends on ARCH_RMOBILE + help + Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform + +config SH_MMCIF + bool "SuperH/Renesas ARM SoCs on-chip MMCIF host controller support" + depends on ARCH_RMOBILE || SH + help + Support for the on-chip MMCIF host controller on SuperH/Renesas ARM SoCs platform + +config MMC_UNIPHIER + bool "UniPhier SD/MMC Host Controller support" + depends on ARCH_UNIPHIER + depends on BLK && DM_MMC + depends on OF_CONTROL + help + This selects support for the Matsushita SD/MMC Host Controller on + SocioNext UniPhier SoCs. + +config RENESAS_SDHI + bool "Renesas R-Car SD/MMC Host Controller support" + depends on ARCH_RMOBILE + depends on BLK && DM_MMC + depends on OF_CONTROL + select BOUNCE_BUFFER + help + This selects support for the Matsushita SD/MMC Host Controller on + Renesas R-Car SoCs. + +config MMC_BCM2835 + bool "BCM2835 family custom SD/MMC Host Controller support" + depends on ARCH_BCM283X + depends on BLK && DM_MMC + depends on OF_CONTROL + default y + help + This selects support for the custom SD host controller in the BCM2835 + family of devices. + + If you have a BCM2835 platform with SD or MMC devices, say Y here. + + If unsure, say N. + +config JZ47XX_MMC + bool "Ingenic JZ47xx SD/MMC Host Controller support" + depends on ARCH_JZ47XX + help + This selects support for the SD Card Controller on Ingenic JZ47xx SoCs. + +config MMC_SANDBOX + bool "Sandbox MMC support" + depends on SANDBOX + depends on BLK && DM_MMC && OF_CONTROL + help + This select a dummy sandbox MMC driver. At present this does nothing + other than allow sandbox to be build with MMC support. This + improves build coverage for sandbox and makes it easier to detect + MMC build errors with sandbox. + +config MMC_SDHCI + bool "Secure Digital Host Controller Interface support" + help + This selects the generic Secure Digital Host Controller Interface. + It is used by manufacturers such as Texas Instruments(R), Ricoh(R) + and Toshiba(R). Most controllers found in laptops are of this type. + + If you have a controller with this interface, say Y here. + + If unsure, say N. + +config MMC_SDHCI_IO_ACCESSORS + bool + depends on MMC_SDHCI + help + This is silent Kconfig symbol that is selected by the drivers that + need to overwrite SDHCI IO memory accessors. + +config MMC_SDHCI_SDMA + bool "Support SDHCI SDMA" + depends on MMC_SDHCI + help + This enables support for the SDMA (Single Operation DMA) defined + in the SD Host Controller Standard Specification Version 1.00 . + +config MMC_SDHCI_ADMA + bool "Support SDHCI ADMA2" + depends on MMC_SDHCI + select MMC_SDHCI_ADMA_HELPERS + help + This enables support for the ADMA (Advanced DMA) defined + in the SD Host Controller Standard Specification Version 3.00 + +config SPL_MMC_SDHCI_ADMA + bool "Support SDHCI ADMA2 in SPL" + depends on MMC_SDHCI + select MMC_SDHCI_ADMA_HELPERS + help + This enables support for the ADMA (Advanced DMA) defined + in the SD Host Controller Standard Specification Version 3.00 in SPL. + +config MMC_SDHCI_ASPEED + bool "Aspeed SDHCI controller" + depends on ARCH_ASPEED + depends on DM_MMC + depends on MMC_SDHCI + help + Enables support for the Aspeed SDHCI 2.0 controller present on Aspeed + SoCs. This device is compatible with SD 3.0 and/or MMC 4.3 + specifications. On the AST2600, the device is also compatible with + MMC 5.1 and eMMC 3.0. + +config MMC_SDHCI_ATMEL + bool "Atmel SDHCI controller support" + depends on ARCH_AT91 + depends on DM_MMC && BLK && ARCH_AT91 + depends on MMC_SDHCI + help + This enables support for the Atmel SDHCI controller, which supports + the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD + Memory Card Specification V3.0, and the SDIO V3.0 specification. + It is compliant with the SD Host Controller Standard V3.0 + specification. + +config MMC_SDHCI_BCM2835 + tristate "SDHCI support for the BCM2835 SD/MMC Controller" + depends on ARCH_BCM283X + depends on MMC_SDHCI + select MMC_SDHCI_IO_ACCESSORS + help + This selects the BCM2835 SD/MMC controller. + + If you have a BCM2835 platform with SD or MMC devices, + say Y here. + + If unsure, say N. + +config MMC_SDHCI_BCMSTB + tristate "SDHCI support for the BCMSTB SD/MMC Controller" + depends on MMC_SDHCI + help + This selects the Broadcom set-top box SD/MMC controller. + + If you have a BCMSTB platform with SD or MMC devices, + say Y here. + + If unsure, say N. + +config MMC_SDHCI_CADENCE + bool "SDHCI support for the Cadence SD/SDIO/eMMC controller" + depends on BLK && DM_MMC + depends on MMC_SDHCI + depends on OF_CONTROL + help + This selects the Cadence SD/SDIO/eMMC driver. + + If you have a controller with this interface, say Y here. + + If unsure, say N. + +config MMC_SDHCI_AM654 + bool "SDHCI Controller on TI's Am654 devices" + depends on ARCH_K3 + depends on MMC_SDHCI + depends on DM_MMC && OF_CONTROL && BLK + depends on REGMAP + select MMC_SDHCI_IO_ACCESSORS + help + Support for Secure Digital Host Controller Interface (SDHCI) + controllers present on TI's AM654 SOCs. + +config MMC_SDHCI_IPROC + bool "SDHCI support for the iProc SD/MMC Controller" + depends on MMC_SDHCI + help + This selects the iProc SD/MMC controller. + + If you have a Broadcom IPROC platform with SD or MMC devices, + say Y or M here. + + If unsure, say N. + +config MMC_SDHCI_KONA + bool "SDHCI support on Broadcom KONA platform" + depends on MMC_SDHCI + help + This selects the Broadcom Kona Secure Digital Host Controller + Interface(SDHCI) support. + This is used in Broadcom mobile SoCs. + + If you have a controller with this interface, say Y here. + +config MMC_SDHCI_MSM + bool "Qualcomm SDHCI controller" + depends on BLK && DM_MMC + depends on MMC_SDHCI + help + Enables support for SDHCI 2.0 controller present on some Qualcomm + Snapdragon devices. This device is compatible with eMMC v4.5 and + SD 3.0 specifications. Both SD and eMMC devices are supported. + Card-detect gpios are not supported. + +config MMC_SDHCI_MV + bool "SDHCI support on Marvell platform" + depends on ARCH_MVEBU + depends on MMC_SDHCI + help + This selects the Secure Digital Host Controller Interface on + Marvell platform. + + If you have a controller with this interface, say Y here. + + If unsure, say N. + +config MMC_SDHCI_PIC32 + bool "Microchip PIC32 on-chip SDHCI support" + depends on DM_MMC && MACH_PIC32 + depends on MMC_SDHCI + help + Support for Microchip PIC32 SDHCI controller. + +config MMC_SDHCI_ROCKCHIP + bool "Arasan SDHCI controller for Rockchip support" + depends on ARCH_ROCKCHIP + depends on DM_MMC && BLK + depends on MMC_SDHCI + help + Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform + +config MMC_SDHCI_S5P + bool "SDHCI support on Samsung S5P SoC" + depends on MMC_SDHCI + help + This selects the Secure Digital Host Controller Interface (SDHCI) + on Samsung S5P SoCs. + + If you have a controller with this interface, say Y here. + + If unsure, say N. + +config MMC_SDHCI_SPEAR + bool "SDHCI support on ST SPEAr platform" + depends on MMC_SDHCI + help + This selects the Secure Digital Host Controller Interface (SDHCI) + often referrered to as the HSMMC block in some of the ST SPEAR range + of SoC + + If you have a controller with this interface, say Y here. + + If unsure, say N. + +config MMC_SDHCI_STI + bool "SDHCI support for STMicroelectronics SoC" + depends on MMC_SDHCI && OF_CONTROL + help + This selects the Secure Digital Host Controller Interface (SDHCI) + on STMicroelectronics STiH410 SoC. + +config MMC_SDHCI_XENON + bool "SDHCI support for the Xenon SDHCI controller" + depends on MMC_SDHCI && DM_MMC && OF_CONTROL + help + Support for Xenon SDHCI host controller on Marvell Armada 3700 + 7k/8k ARM SoCs platforms + + If you have a controller with this interface, say Y here. + + If unsure, say N. + +config MMC_SDHCI_TANGIER + bool "Tangier SDHCI controller support" + depends on DM_MMC && BLK + depends on MMC_SDHCI + help + This selects support for SDHCI controller on Tanginer + SoC. Note that this controller does not sit on PCI bus and, + hence, cannot be enumerated by standard PCI means. + + If you're using an Intel Tangier SoC (available on Intel + Edison board), say Y here. + + If unsure, say N. + +config MMC_SDHCI_TEGRA + bool "SDHCI platform support for the Tegra SD/MMC Controller" + depends on ARCH_TEGRA + select BOUNCE_BUFFER + default y + help + This selects the Tegra SD/MMC controller. If you have a Tegra + platform with SD or MMC devices, say Y here. + + If unsure, say N. + +config TEGRA124_MMC_DISABLE_EXT_LOOPBACK + bool "Disable external clock loopback" + depends on MMC_SDHCI_TEGRA && TEGRA124 + help + Disable the external clock loopback and use the internal one on SDMMC3 + as per the SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits + being set to 0xfffd according to the TRM. + + TODO(marcel.ziswiler@toradex.com): Move to device tree controlled + approach once proper kernel integration made it mainline. + +config MMC_SDHCI_ZYNQ + bool "Arasan SDHCI controller support" + depends on DM_MMC && OF_CONTROL && BLK + depends on MMC_SDHCI + help + Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform + +config ZYNQ_SDHCI_MAX_FREQ + int "Set the maximum frequency of the controller" + depends on MMC_SDHCI_ZYNQ + help + Set the maximum frequency of the controller. + +config ZYNQ_SDHCI_MIN_FREQ + int "Set the minimum frequency of the controller" + depends on MMC_SDHCI_ZYNQ + default 0 + help + Set the minimum frequency of the controller. + +config ZYNQ_HISPD_BROKEN + bool "High speed broken for Zynq SDHCI controller" + depends on MMC_SDHCI_ZYNQ + help + Set if high speed mode is broken. + +config MMC_SUNXI + bool "Allwinner sunxi SD/MMC Host Controller support" + depends on ARCH_SUNXI && !UART0_PORT_F + default y + help + This selects support for the SD/MMC Host Controller on + Allwinner sunxi SoCs. + +config MMC_SUNXI_HAS_NEW_MODE + bool + depends on MMC_SUNXI + +config MMC_SUNXI_HAS_MODE_SWITCH + bool + depends on MMC_SUNXI + +config GENERIC_ATMEL_MCI + bool "Atmel Multimedia Card Interface support" + depends on DM_MMC && BLK && ARCH_AT91 + help + This enables support for Atmel High Speed Multimedia Card Interface + (HSMCI), which supports the MultiMedia Card (MMC) Specification V4.3, + the SD Memory Card Specification V2.0, the SDIO V2.0 specification + and CE-ATA V1.1. + +config STM32_SDMMC2 + bool "STMicroelectronics STM32H7 SD/MMC Host Controller support" + depends on DM_MMC && BLK && OF_CONTROL + help + This selects support for the SD/MMC controller on STM32H7 SoCs. + If you have a board based on such a SoC and with a SD/MMC slot, + say Y or M here. + +config FTSDC010 + bool "Ftsdc010 SD/MMC controller Support" + help + This SD/MMC controller is present in Andestech SoCs which is based on Faraday IP. + +config FTSDC010_SDIO + bool "Support ftsdc010 sdio" + default n + depends on FTSDC010 + help + This can enable ftsdc010 sdio function. + +config MMC_MTK + bool "MediaTek SD/MMC Card Interface support" + depends on ARCH_MEDIATEK || ARCH_MTMIPS + depends on BLK && DM_MMC + depends on OF_CONTROL + help + This selects the MediaTek(R) Secure digital and Multimedia card Interface. + If you have a machine with a integrated SD/MMC card reader, say Y or M here. + This is needed if support for any SD/SDIO/MMC devices is required. + If unsure, say N. + +endif + +config FSL_ESDHC + bool "Freescale/NXP eSDHC controller support" + help + This selects support for the eSDHC (Enhanced Secure Digital Host + Controller) found on numerous Freescale/NXP SoCs. + +config FSL_ESDHC_SUPPORT_ADMA2 + bool "enable ADMA2 support" + depends on FSL_ESDHC + select MMC_SDHCI_ADMA_HELPERS + help + This enables support for the ADMA2 transfer mode. If supported by the + eSDHC it will allow 64bit DMA addresses. + +config FSL_ESDHC_33V_IO_RELIABILITY_WORKAROUND + bool "enable eSDHC workaround for 3.3v IO reliability issue" + depends on FSL_ESDHC && DM_MMC + default n + help + When eSDHC operates at 3.3v, damage can accumulate in an internal + level shifter at a higher than expected rate. The faster the interface + runs, the more damage accumulates. This issue now is found on LX2160A + eSDHC1 for only SD card. The hardware workaround is recommended to use + an on-board level shifter that is 1.8v on SoC side and 3.3v on SD card + side. For boards without hardware workaround, this option could be + enabled, ensuring 1.8v IO voltage and disabling eSDHC if no card. + This option assumes no hotplug, and u-boot has to make all the way to + to linux to use 1.8v UHS-I speed mode if has card. + +config FSL_ESDHC_VS33_NOT_SUPPORT + bool "3.3V power supply not supported" + depends on FSL_ESDHC + help + For eSDHC, power supply is through peripheral circuit. 3.3V support is + common. Select this if 3.3V power supply not supported. + +config FSL_ESDHC_IMX + bool "Freescale/NXP i.MX eSDHC controller support" + help + This selects support for the i.MX eSDHC (Enhanced Secure Digital Host + Controller) found on numerous Freescale/NXP SoCs. + +config FSL_USDHC + bool "Freescale/NXP i.MX uSDHC controller support" + depends on MX6 || MX7 ||ARCH_MX7ULP || IMX8 || IMX8M || IMXRT + select FSL_ESDHC_IMX + help + This enables the Ultra Secured Digital Host Controller enhancements + +endmenu + +config SYS_FSL_ERRATUM_ESDHC111 + bool + +config SYS_FSL_ERRATUM_ESDHC13 + bool + +config SYS_FSL_ERRATUM_ESDHC135 + bool + +config SYS_FSL_ERRATUM_ESDHC_A001 + bool + +config SYS_FSL_ERRATUM_A011334 + bool + +config SYS_FSL_ESDHC_UNRELIABLE_PULSE_DETECTION_WORKAROUND + bool |