1 files changed, 121 insertions, 0 deletions
diff --git a/roms/u-boot/drivers/net/pic32_mdio.c b/roms/u-boot/drivers/net/pic32_mdio.c
new file mode 100644
index 000000000..d4049cfea
--- /dev/null
+++ b/roms/u-boot/drivers/net/pic32_mdio.c
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * pic32_mdio.c: PIC32 MDIO/MII driver, part of pic32_eth.c.
+ *
+ * Copyright 2015 Microchip Inc.
+ *	Purna Chandra Mandal <purna.mandal@microchip.com>
+ */
+#include <common.h>
+#include <phy.h>
+#include <miiphy.h>
+#include <errno.h>
+#include <wait_bit.h>
+#include <asm/io.h>
+#include <linux/delay.h>
+#include "pic32_eth.h"
+
+static int pic32_mdio_write(struct mii_dev *bus,
+			    int addr, int dev_addr,
+			    int reg, u16 value)
+{
+	u32 v;
+	struct pic32_mii_regs *mii_regs = bus->priv;
+
+	/* Wait for the previous operation to finish */
+	wait_for_bit_le32(&mii_regs->mind.raw, MIIMIND_BUSY,
+			  false, CONFIG_SYS_HZ, true);
+
+	/* Put phyaddr and regaddr into MIIMADD */
+	v = (addr << MIIMADD_PHYADDR_SHIFT) | (reg & MIIMADD_REGADDR);
+	writel(v, &mii_regs->madr.raw);
+
+	/* Initiate a write command */
+	writel(value, &mii_regs->mwtd.raw);
+
+	/* Wait 30 clock cycles for busy flag to be set */
+	udelay(12);
+
+	/* Wait for write to complete */
+	wait_for_bit_le32(&mii_regs->mind.raw, MIIMIND_BUSY,
+			  false, CONFIG_SYS_HZ, true);
+
+	return 0;
+}
+
+static int pic32_mdio_read(struct mii_dev *bus, int addr, int devaddr, int reg)
+{
+	u32 v;
+	struct pic32_mii_regs *mii_regs = bus->priv;
+
+	/* Wait for the previous operation to finish */
+	wait_for_bit_le32(&mii_regs->mind.raw, MIIMIND_BUSY,
+			  false, CONFIG_SYS_HZ, true);
+
+	/* Put phyaddr and regaddr into MIIMADD */
+	v = (addr << MIIMADD_PHYADDR_SHIFT) | (reg & MIIMADD_REGADDR);
+	writel(v, &mii_regs->madr.raw);
+
+	/* Initiate a read command */
+	writel(MIIMCMD_READ, &mii_regs->mcmd.raw);
+
+	/* Wait 30 clock cycles for busy flag to be set */
+	udelay(12);
+
+	/* Wait for read to complete */
+	wait_for_bit_le32(&mii_regs->mind.raw,
+			  MIIMIND_NOTVALID | MIIMIND_BUSY,
+			  false, CONFIG_SYS_HZ, false);
+
+	/* Clear the command register */
+	writel(0, &mii_regs->mcmd.raw);
+
+	/* Grab the value read from the PHY */
+	v = readl(&mii_regs->mrdd.raw);
+	return v;
+}
+
+static int pic32_mdio_reset(struct mii_dev *bus)
+{
+	struct pic32_mii_regs *mii_regs = bus->priv;
+
+	/* Reset MII (due to new addresses) */
+	writel(MIIMCFG_RSTMGMT, &mii_regs->mcfg.raw);
+
+	/* Wait for the operation to finish */
+	wait_for_bit_le32(&mii_regs->mind.raw, MIIMIND_BUSY,
+		     false, CONFIG_SYS_HZ, true);
+
+	/* Clear reset bit */
+	writel(0, &mii_regs->mcfg);
+
+	/* Wait for the operation to finish */
+	wait_for_bit_le32(&mii_regs->mind.raw, MIIMIND_BUSY,
+			  false, CONFIG_SYS_HZ, true);
+
+	/* Set the MII Management Clock (MDC) - no faster than 2.5 MHz */
+	writel(MIIMCFG_CLKSEL_DIV40, &mii_regs->mcfg.raw);
+
+	/* Wait for the operation to finish */
+	wait_for_bit_le32(&mii_regs->mind.raw, MIIMIND_BUSY,
+			  false, CONFIG_SYS_HZ, true);
+	return 0;
+}
+
+int pic32_mdio_init(const char *name, ulong ioaddr)
+{
+	struct mii_dev *bus;
+
+	bus = mdio_alloc();
+	if (!bus) {
+		printf("Failed to allocate PIC32-MDIO bus\n");
+		return -ENOMEM;
+	}
+
+	bus->read = pic32_mdio_read;
+	bus->write = pic32_mdio_write;
+	bus->reset = pic32_mdio_reset;
+	strncpy(bus->name, name, sizeof(bus->name));
+	bus->priv = (void *)ioaddr;
+
+	return mdio_register(bus);
+}