diff options
Diffstat (limited to 'roms/u-boot/drivers/phy/Kconfig')
| -rw-r--r-- | roms/u-boot/drivers/phy/Kconfig | 272 |
1 files changed, 272 insertions, 0 deletions
diff --git a/roms/u-boot/drivers/phy/Kconfig b/roms/u-boot/drivers/phy/Kconfig new file mode 100644 index 000000000..008186a10 --- /dev/null +++ b/roms/u-boot/drivers/phy/Kconfig @@ -0,0 +1,272 @@ + +menu "PHY Subsystem" + +config PHY + bool "PHY Core" + depends on DM + help + PHY support. + + This framework is designed to provide a generic interface for PHY + devices. PHY devices are dedicated hardware that handle the physical + layer of the protocols in the OSI model. + PHYs are commonly used for high speed interfaces such as Serial-ATA + or PCI express. + The API provides functions to initialize/deinitialize the + PHY, power on/off the PHY, and reset the PHY. It's meant to be as + compatible as possible with the equivalent framework found in the + linux kernel. + +config SPL_PHY + bool "PHY Core in SPL" + depends on DM && SPL + help + PHY support in SPL. + + This framework is designed to provide a generic interface for PHY + devices. PHY devices are dedicated hardware that handle the physical + layer of the protocols (https://en.wikipedia.org/wiki/OSI_model). + PHYs are commonly used for high speed interfaces such as Serial-ATA + or PCI express. + The API provides functions to initialize/deinitialize the + PHY, power on/off the PHY, and reset the PHY. It's meant to be as + compatible as possible with the equivalent framework found in the + linux kernel. + +config PHY_SANDBOX + bool "Sandbox PHY support" + depends on SANDBOX + depends on PHY + help + This select a dummy sandbox PHY driver. It used only to implement + the unit tests for the phy framework + +config NOP_PHY + bool "NOP PHY driver" + depends on PHY + help + Support for a no-op PHY driver (stubbed PHY driver). + + This is useful when a driver uses the PHY framework but no real PHY + hardware exists. + +config SPL_NOP_PHY + bool "NOP PHY driver in SPL" + depends on SPL_PHY + help + Support for a no-op PHY driver (stubbed PHY driver) in the SPL. + + This is useful when a driver uses the PHY framework but no real PHY + hardware exists. + +config MIPI_DPHY_HELPERS + bool "MIPI D-PHY support helpers" + help + Provides a number of helpers a core functions for MIPI D-PHY drivers. + +config BCM6318_USBH_PHY + bool "BCM6318 USBH PHY support" + depends on PHY && ARCH_BMIPS + select POWER_DOMAIN + help + Support for the Broadcom MIPS BCM6318 USBH PHY. + +config BCM6348_USBH_PHY + bool "BCM6348 USBH PHY support" + depends on PHY && ARCH_BMIPS + help + Support for the Broadcom MIPS BCM6348 USBH PHY. + +config BCM6358_USBH_PHY + bool "BCM6358 USBH PHY support" + depends on PHY && ARCH_BMIPS + help + Support for the Broadcom MIPS BCM6358 USBH PHY. + +config BCM6368_USBH_PHY + bool "BCM6368 USBH PHY support" + depends on PHY && ARCH_BMIPS + help + Support for the Broadcom MIPS BCM6368 USBH PHY. + +config BCM_SR_PCIE_PHY + bool "Broadcom Stingray PCIe PHY driver" + depends on PHY + help + Enable this to support the Broadcom Stingray PCIe PHY + If unsure, say N. + +config PHY_DA8XX_USB + tristate "TI DA8xx USB PHY Driver" + depends on PHY && ARCH_DAVINCI + help + Enable this to support the USB PHY on DA8xx SoCs. + +config PIPE3_PHY + bool "Support omap's PIPE3 PHY" + depends on PHY && ARCH_OMAP2PLUS + help + Support for the omap PIPE3 phy for sata + + This PHY is found on omap devices supporting SATA such as dra7, am57x + and omap5 + +config SPL_PIPE3_PHY + bool "Support omap's PIPE3 PHY in SPL" + depends on SPL_PHY && ARCH_OMAP2PLUS + help + Support for the omap PIPE3 phy for sata in SPL + + This PHY is found on omap devices supporting SATA such as dra7, am57x + and omap5 + +config AM654_PHY + tristate "TI AM654 SERDES support" + depends on PHY && ARCH_K3 + select REGMAP + select SYSCON + help + This option enables support for TI AM654 SerDes PHY used for + PCIe. + +config STI_USB_PHY + bool "STMicroelectronics USB2 picoPHY driver for STiH407 family" + depends on PHY && ARCH_STI + help + This is the generic phy driver for the picoPHY ports + used by USB2 and USB3 Host controllers available on + STiH407 SoC families. + +config PHY_QCOM_IPQ4019_USB + tristate "Qualcomm IPQ4019 USB PHY driver" + depends on PHY && ARCH_IPQ40XX + help + Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s. + +config PHY_RCAR_GEN2 + tristate "Renesas R-Car Gen2 USB PHY" + depends on PHY && RCAR_GEN2 + help + Support for the Renesas R-Car Gen2 USB PHY. This driver operates the + PHY connected to USBHS module, PCI EHCI module and USB3.0 module and + allows configuring the module multiplexing. + +config PHY_RCAR_GEN3 + tristate "Renesas R-Car Gen3 USB PHY" + depends on PHY && RCAR_GEN3 && CLK && DM_REGULATOR + default y if RCAR_GEN3 + help + Support for the Renesas R-Car Gen3 USB PHY. This driver operates the + PHY connected to EHCI USB module and controls USB OTG operation. + +config PHY_STM32_USBPHYC + tristate "STMicroelectronics STM32 SoC USB HS PHY driver" + depends on PHY && ARCH_STM32MP + help + Enable this to support the High-Speed USB transceiver that is part of + STMicroelectronics STM32 SoCs. + + This driver controls the entire USB PHY block: the USB PHY controller + (USBPHYC) and the two 8-bit wide UTMI+ interface. First interface is + used by an HS USB Host controller, and the second one is shared + between an HS USB OTG controller and an HS USB Host controller, + selected by an USB switch. + +config MESON_GXBB_USB_PHY + bool "Amlogic Meson GXBB USB PHY" + depends on PHY && ARCH_MESON && MESON_GXBB + imply REGMAP + help + This is the generic phy driver for the Amlogic Meson GXBB + USB2 PHY. + +config MESON_GXL_USB_PHY + bool "Amlogic Meson GXL USB PHYs" + depends on PHY && ARCH_MESON && (MESON_GXL || MESON_GXM || MESON_AXG) + imply REGMAP + help + This is the generic phy driver for the Amlogic Meson GXL + USB2 and USB3 PHYS. + +config MESON_G12A_USB_PHY + bool "Amlogic Meson G12A USB PHYs" + depends on PHY && ARCH_MESON && MESON_G12A + imply REGMAP + help + This is the generic phy driver for the Amlogic Meson G12A + USB2 and USB3 PHYS. + +config MESON_AXG_MIPI_DPHY + bool "Amlogic Meson AXG MIPI D-PHY" + depends on PHY && ARCH_MESON && MESON_AXG + select MIPI_DPHY_HELPERS + imply REGMAP + help + This is the generic phy driver for the Amlogic Meson AXG + MIPI D-PHY. + +config MESON_AXG_MIPI_PCIE_ANALOG_PHY + bool "Amlogic Meson AXG MIPI PCIe Analog PHY" + depends on PHY && ARCH_MESON && MESON_AXG + select MIPI_DPHY_HELPERS + imply REGMAP + help + This is the generic phy driver for the Amlogic Meson AXG + MIPI PCIe Analog PHY. + +config MSM8916_USB_PHY + bool "Qualcomm MSM8916 USB PHY support" + depends on PHY + help + Support the USB PHY in msm8916 + + This PHY is found on qualcomm dragonboard410c development board. + +config OMAP_USB2_PHY + bool "Support OMAP's USB2 PHY" + depends on PHY + depends on SYSCON + help + Support for the OMAP's USB2 PHY. + + This PHY is found on OMAP devices supporting USB2. + + +config KEYSTONE_USB_PHY + bool "Support TI Keystone USB PHY" + depends on PHY + depends on ARCH_KEYSTONE + help + Support for the USB PHY found on some Keystone (k2) processors + + This PHY is found on some Keystone (K2) devices supporting USB. + +config MT7620_USB_PHY + bool "MediaTek MT7620 USB PHY support" + depends on PHY + depends on SOC_MT7620 + help + Support the intergated USB PHY in MediaTek MT7620 SoC + +config MT76X8_USB_PHY + bool "MediaTek MT76x8 (7628/88) USB PHY support" + depends on PHY + depends on SOC_MT7628 + help + Support the USB PHY in MT76x8 SoCs + + This PHY is found on MT76x8 devices supporting USB. + +config PHY_MTK_TPHY + bool "MediaTek T-PHY Driver" + depends on PHY + depends on ARCH_MEDIATEK + help + MediaTek T-PHY driver supports usb2.0, usb3.0 ports, PCIe and + SATA, and meanwhile supports two version T-PHY which have + different banks layout, the T-PHY with shared banks between + multi-ports is first version, otherwise is second veriosn, + so you can easily distinguish them by banks layout. + +source "drivers/phy/rockchip/Kconfig" +endmenu |