1 files changed, 140 insertions, 0 deletions
diff --git a/roms/u-boot/drivers/pinctrl/exynos/pinctrl-exynos.c b/roms/u-boot/drivers/pinctrl/exynos/pinctrl-exynos.c
new file mode 100644
index 000000000..2640c8fce
--- /dev/null
+++ b/roms/u-boot/drivers/pinctrl/exynos/pinctrl-exynos.c
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Exynos pinctrl driver common code.
+ * Copyright (C) 2016 Samsung Electronics
+ * Thomas Abraham <thomas.ab@samsung.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include "pinctrl-exynos.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/**
+ * exynos_pinctrl_setup_peri: setup pinctrl for a peripheral.
+ * conf: soc specific pin configuration data array
+ * num_conf: number of configurations in the conf array.
+ * base: base address of the pin controller.
+ */
+void exynos_pinctrl_setup_peri(struct exynos_pinctrl_config_data *conf,
+		unsigned int num_conf, unsigned long base)
+{
+	unsigned int idx, val;
+
+	for (idx = 0; idx < num_conf; idx++) {
+		val = readl(base + conf[idx].offset);
+		val &= ~(conf[idx].mask);
+		val |= conf[idx].value;
+		writel(val, base + conf[idx].offset);
+	}
+}
+
+/* given a pin-name, return the address of pin config registers */
+static unsigned long pin_to_bank_base(struct udevice *dev, const char *pin_name,
+						u32 *pin)
+{
+	struct exynos_pinctrl_priv *priv = dev_get_priv(dev);
+	const struct samsung_pin_ctrl *pin_ctrl = priv->pin_ctrl;
+	const struct samsung_pin_bank_data *bank_data = pin_ctrl->pin_banks;
+	u32 nr_banks = pin_ctrl->nr_banks, idx = 0;
+	char bank[10];
+
+	/*
+	 * The format of the pin name is <bank name>-<pin_number>.
+	 * Example: gpa0-4 (gpa0 is the bank name and 4 is the pin number.
+	 */
+	while (pin_name[idx] != '-') {
+		bank[idx] = pin_name[idx];
+		idx++;
+	}
+	bank[idx] = '\0';
+	*pin = pin_name[++idx] - '0';
+
+	/* lookup the pin bank data using the pin bank name */
+	for (idx = 0; idx < nr_banks; idx++)
+		if (!strcmp(bank, bank_data[idx].name))
+			break;
+
+	return priv->base + bank_data[idx].offset;
+}
+
+/**
+ * exynos_pinctrl_set_state: configure a pin state.
+ * dev: the pinctrl device to be configured.
+ * config: the state to be configured.
+ */
+int exynos_pinctrl_set_state(struct udevice *dev, struct udevice *config)
+{
+	const void *fdt = gd->fdt_blob;
+	int node = dev_of_offset(config);
+	unsigned int count, idx, pin_num;
+	unsigned int pinfunc, pinpud, pindrv;
+	unsigned long reg, value;
+	const char *name;
+
+	/*
+	 * refer to the following document for the pinctrl bindings
+	 * linux/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
+	 */
+	count = fdt_stringlist_count(fdt, node, "samsung,pins");
+	if (count <= 0)
+		return -EINVAL;
+
+	pinfunc = fdtdec_get_int(fdt, node, "samsung,pin-function", -1);
+	pinpud = fdtdec_get_int(fdt, node, "samsung,pin-pud", -1);
+	pindrv = fdtdec_get_int(fdt, node, "samsung,pin-drv", -1);
+
+	for (idx = 0; idx < count; idx++) {
+		name = fdt_stringlist_get(fdt, node, "samsung,pins", idx, NULL);
+		if (!name)
+			continue;
+		reg = pin_to_bank_base(dev, name, &pin_num);
+
+		if (pinfunc != -1) {
+			value = readl(reg + PIN_CON);
+			value &= ~(0xf << (pin_num << 2));
+			value |= (pinfunc << (pin_num << 2));
+			writel(value, reg + PIN_CON);
+		}
+
+		if (pinpud != -1) {
+			value = readl(reg + PIN_PUD);
+			value &= ~(0x3 << (pin_num << 1));
+			value |= (pinpud << (pin_num << 1));
+			writel(value, reg + PIN_PUD);
+		}
+
+		if (pindrv != -1) {
+			value = readl(reg + PIN_DRV);
+			value &= ~(0x3 << (pin_num << 1));
+			value |= (pindrv << (pin_num << 1));
+			writel(value, reg + PIN_DRV);
+		}
+	}
+
+	return 0;
+}
+
+int exynos_pinctrl_probe(struct udevice *dev)
+{
+	struct exynos_pinctrl_priv *priv;
+	fdt_addr_t base;
+
+	priv = dev_get_priv(dev);
+	if (!priv)
+		return -EINVAL;
+
+	base = dev_read_addr(dev);
+	if (base == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	priv->base = base;
+	priv->pin_ctrl = (struct samsung_pin_ctrl *)dev_get_driver_data(dev) +
+				dev_seq(dev);
+
+	return 0;
+}