diff options
Diffstat (limited to 'roms/u-boot/drivers/power/pmic/Kconfig')
| -rw-r--r-- | roms/u-boot/drivers/power/pmic/Kconfig | 334 |
1 files changed, 334 insertions, 0 deletions
diff --git a/roms/u-boot/drivers/power/pmic/Kconfig b/roms/u-boot/drivers/power/pmic/Kconfig new file mode 100644 index 000000000..583fd3ddc --- /dev/null +++ b/roms/u-boot/drivers/power/pmic/Kconfig @@ -0,0 +1,334 @@ +config DM_PMIC + bool "Enable Driver Model for PMIC drivers (UCLASS_PMIC)" + depends on DM + ---help--- + This config enables the driver-model PMIC support. + UCLASS_PMIC - designed to provide an I/O interface for PMIC devices. + For the multi-function PMIC devices, this can be used as parent I/O + device for each IC's interface. Then, each children uses its parent + for read/write. For detailed description, please refer to the files: + - 'drivers/power/pmic/pmic-uclass.c' + - 'include/power/pmic.h' + +config PMIC_CHILDREN + bool "Allow child devices for PMICs" + depends on DM_PMIC + default y + ---help--- + This allows PMICs to support child devices (such as regulators) in + SPL. This adds quite a bit of code so if you are not using this + feature you can turn it off. Most likely you should turn it on for + U-Boot proper. + +config SPL_PMIC_CHILDREN + bool "Allow child devices for PMICs in SPL" + depends on DM_PMIC + default y + ---help--- + This allows PMICs to support child devices (such as regulators) in + SPL. This adds quite a bit of code so if you are not using this + feature you can turn it off. In this case you may need a 'back door' + to call your regulator code (e.g. see rk8xx.c for direct functions + for use in SPL). + +config PMIC_ACT8846 + bool "Enable support for the active-semi 8846 PMIC" + depends on DM_PMIC && DM_I2C + ---help--- + This PMIC includes 4 DC/DC step-down buck regulators and 8 low-dropout + regulators (LDOs). It also provides some GPIO, reset and battery + functions. It uses an I2C interface and is designed for use with + tablets and smartphones. + +config DM_PMIC_DA9063 + bool "Enable Driver Model for the Dialog DA9063 PMIC" + depends on DM_PMIC + help + This config enables implementation of driver-model pmic uclass features + for PMIC DA9063. The driver implements read/write operations. + +config SPL_DM_PMIC_DA9063 + bool "Enable Driver Model for the Dialog DA9063 PMIC in SPL" + depends on DM_PMIC && SPL + help + This config enables implementation of driver-model pmic uclass features + for PMIC DA9063. The driver implements read/write operations. + +config PMIC_AS3722 + bool "Enable support for the Austria Micro Systems (AMS) AS7322 PMIC" + help + The AS3722 includes 7 DC/DC buck convertors, 11 low-noise LDOs, a + real-time clock, GPIOs, ADC and a few other features. It uses an I2C + interface and is designs to cover most of the power managementment + required for a tablets or laptop. + +config DM_PMIC_BD71837 + bool "Enable Driver Model for PMIC BD71837" + depends on DM_PMIC + help + This config enables implementation of driver-model pmic uclass features + for PMIC BD71837. The driver implements read/write operations. + +config SPL_DM_PMIC_BD71837 + bool "Enable Driver Model for PMIC BD71837 in SPL stage" + depends on DM_PMIC + help + This config enables implementation of driver-model pmic uclass + features for PMIC BD71837. The driver implements read/write + operations. + +config DM_PMIC_FAN53555 + bool "Enable support for OnSemi FAN53555" + depends on DM_PMIC && DM_REGULATOR && DM_I2C + select DM_REGULATOR_FAN53555 + help + This config enables implementation of driver-model PMIC + uclass features for the FAN53555 regulator. The FAN53555 is + a (family of) single-output regulators that supports + transitioning between two different output voltages based on + an voltage selection pin. + + The driver implements read/write operations for use with the FAN53555 + regulator driver and binds the regulator driver to its node. + +config DM_PMIC_MP5416 + bool "Enable Driver Model for PMIC MP5416" + depends on DM_PMIC + help + This config enables implementation of driver-model pmic uclass features + for PMIC MP5416. The driver implements read/write operations. + +config SPL_DM_PMIC_MP5416 + bool "Enable Driver Model for PMIC MP5416 in SPL stage" + depends on DM_PMIC + help + This config enables implementation of driver-model pmic uclass + features for PMIC MP5416. The driver implements read/write + operations. + +config DM_PMIC_PCA9450 + bool "Enable Driver Model for PMIC PCA9450" + depends on DM_PMIC + help + This config enables implementation of driver-model pmic uclass features + for PMIC PCA9450. The driver implements read/write operations. + +config SPL_DM_PMIC_PCA9450 + bool "Enable Driver Model for PMIC PCA9450" + depends on DM_PMIC + help + This config enables implementation of driver-model pmic uclass features + for PMIC PCA9450 in SPL. The driver implements read/write operations. + +config DM_PMIC_PFUZE100 + bool "Enable Driver Model for PMIC PFUZE100" + depends on DM_PMIC + ---help--- + This config enables implementation of driver-model pmic uclass features + for PMIC PFUZE100. The driver implements read/write operations. + +config SPL_DM_PMIC_PFUZE100 + bool "Enable Driver Model for PMIC PFUZE100 in SPL" + depends on DM_PMIC + ---help--- + This config enables implementation of driver-model pmic uclass features + for PMIC PFUZE100 in SPL. The driver implements read/write operations. + +config DM_PMIC_MAX77686 + bool "Enable Driver Model for PMIC MAX77686" + depends on DM_PMIC + ---help--- + This config enables implementation of driver-model pmic uclass features + for PMIC MAX77686. The driver implements read/write operations. + +config DM_PMIC_MAX8998 + bool "Enable Driver Model for PMIC MAX8998" + depends on DM_PMIC + ---help--- + This config enables implementation of driver-model pmic uclass features + for PMIC MAX8998. The driver implements read/write operations. + +config DM_PMIC_MC34708 + bool "Enable Driver Model for PMIC MC34708" + depends on DM_PMIC + help + This config enables implementation of driver-model pmic uclass features + for PMIC MC34708. The driver implements read/write operations. + +config PMIC_MAX8997 + bool "Enable Driver Model for PMIC MAX8997" + depends on DM_PMIC + ---help--- + This config enables implementation of driver-model pmic uclass features + for PMIC MAX8997. The driver implements read/write operations. + This is a Power Management IC with RTC, Fuel Gauge, MUIC control on Chip. + - 21x LDOs + - 12x GPIOs + - Haptic Motor driver + - RTC with two alarms + - Fueal Gauge and One backup battery charger + - MUIC + - Others + +config PMIC_PM8916 + bool "Enable Driver Model for Qualcomm PM8916 PMIC" + depends on DM_PMIC + ---help--- + The PM8916 is a PMIC connected to one (or several) processors + with SPMI bus. It has 2 slaves with several peripherals: + - 18x LDO + - 4x GPIO + - Power and Reset buttons + - Watchdog + - RTC + - Vibrator drivers + - Others + + Driver binding info: doc/device-tree-bindings/pmic/pm8916.txt + +config PMIC_RK8XX + bool "Enable support for Rockchip PMIC RK8XX" + depends on DM_PMIC + ---help--- + The Rockchip RK808 PMIC provides four buck DC-DC convertors, 8 LDOs, + an RTC and two low Rds (resistance (drain to source)) switches. It is + accessed via an I2C interface. The device is used with Rockchip SoCs. + This driver implements register read/write operations. + +config PMIC_S2MPS11 + bool "Enable Driver Model for PMIC Samsung S2MPS11" + depends on DM_PMIC + ---help--- + The Samsung S2MPS11 PMIC provides: + - 38 adjustable LDO regulators + - 9 High-Efficiency Buck Converters + - 1 BuckBoost Converter + - RTC with two alarms + - Backup battery charger + - I2C Configuration Interface + This driver provides access to I/O interface only. + Binding info: doc/device-tree-bindings/pmic/s2mps11.txt + +config DM_PMIC_SANDBOX + bool "Enable Driver Model for emulated Sandbox PMIC" + depends on DM_PMIC + ---help--- + Enable the driver for Sandbox PMIC emulation. The emulated PMIC device + depends on two drivers: + - sandbox PMIC I/O driver - implements dm pmic operations + - sandbox PMIC i2c emul driver - emulates the PMIC's I2C transmission + + A detailed information can be found in header: '<power/sandbox_pmic.h>' + + The Sandbox PMIC info: + * I/O interface: + - I2C chip address: 0x40 + - first register address: 0x0 + - register count: 0x10 + * Adjustable outputs: + - 2x LDO + - 2x BUCK + - Each, with a different operating conditions (header). + * Reset values: + - set by i2c emul driver's probe() (defaults in header) + + Driver binding info: doc/device-tree-bindings/pmic/sandbox.txt + +config PMIC_S5M8767 + bool "Enable Driver Model for the Samsung S5M8767 PMIC" + depends on DM_PMIC + ---help--- + The S5M8767 PMIC provides a large array of LDOs and BUCKs for use + as a SoC power controller. It also provides 32KHz clock outputs. This + driver provides basic register access and sets up the attached + regulators if regulator support is enabled. + +config PMIC_RN5T567 + bool "Enable driver for Ricoh RN5T567 PMIC" + depends on DM_PMIC + ---help--- + The RN5T567 is a PMIC with 4 step-down DC/DC converters, 5 LDO + regulators Real-Time Clock and 4 GPIOs. This driver provides + register access only. + +config PMIC_TPS65090 + bool "Enable driver for Texas Instruments TPS65090 PMIC" + depends on DM_PMIC + ---help--- + The TPS65090 is a PMIC containing several LDOs, DC to DC convertors, + FETs and a battery charger. This driver provides register access + only, and you can enable the regulator/charger drivers separately if + required. + +config PMIC_PALMAS + bool "Enable driver for Texas Instruments PALMAS PMIC" + depends on DM_PMIC + ---help--- + The PALMAS is a PMIC containing several LDOs, SMPS. + This driver binds the pmic children. + +config PMIC_LP873X + bool "Enable driver for Texas Instruments LP873X PMIC" + depends on DM_PMIC + ---help--- + The LP873X is a PMIC containing couple of LDOs and couple of SMPS. + This driver binds the pmic children. + +config PMIC_LP87565 + bool "Enable driver for Texas Instruments LP87565 PMIC" + depends on DM_PMIC + ---help--- + The LP87565 is a PMIC containing a bunch of SMPS. + This driver binds the pmic children. + +config POWER_MC34VR500 + bool "Enable driver for Freescale MC34VR500 PMIC" + ---help--- + The MC34VR500 is used in conjunction with the FSL T1 and LS1 series + SoC. It provides 4 buck DC-DC convertors and 5 LDOs, and it is accessed + via an I2C interface. + +config DM_PMIC_TPS65910 + bool "Enable driver for Texas Instruments TPS65910 PMIC" + depends on DM_PMIC + ---help--- + The TPS65910 is a PMIC containing 3 buck DC-DC converters, one boost + DC-DC converter, 8 LDOs and a RTC. This driver binds the SMPS and LDO + pmic children. + +config PMIC_STPMIC1 + bool "Enable support for STMicroelectronics STPMIC1 PMIC" + depends on DM_PMIC && DM_I2C + select SYSRESET_CMD_POWEROFF if CMD_POWEROFF && !ARM_PSCI_FW + ---help--- + The STPMIC1 PMIC provides 4 BUCKs, 6 LDOs, 1 VREF and 2 power switches. + It is accessed via an I2C interface. The device is used with STM32MP1 + SoCs. This driver implements register read/write operations. + +config SPL_PMIC_PALMAS + bool "Enable driver for Texas Instruments PALMAS PMIC" + depends on DM_PMIC + help + The PALMAS is a PMIC containing several LDOs, SMPS. + This driver binds the pmic children in SPL. + +config SPL_PMIC_LP873X + bool "Enable driver for Texas Instruments LP873X PMIC" + depends on DM_PMIC + help + The LP873X is a PMIC containing couple of LDOs and couple of SMPS. + This driver binds the pmic children in SPL. + +config SPL_PMIC_LP87565 + bool "Enable driver for Texas Instruments LP87565 PMIC" + depends on DM_PMIC + help + The LP87565 is a PMIC containing a bunch of SMPS. + This driver binds the pmic children in SPL. + +config PMIC_TPS65941 + bool "Enable driver for Texas Instruments TPS65941 PMIC" + depends on DM_PMIC + help + The TPS65941 is a PMIC containing a bunch of SMPS & LDOs. + This driver binds the pmic children. |