diff options
Diffstat (limited to 'roms/u-boot/drivers/ram/stm32mp1/stm32mp1_interactive.c')
| -rw-r--r-- | roms/u-boot/drivers/ram/stm32mp1/stm32mp1_interactive.c | 497 |
1 files changed, 497 insertions, 0 deletions
diff --git a/roms/u-boot/drivers/ram/stm32mp1/stm32mp1_interactive.c b/roms/u-boot/drivers/ram/stm32mp1/stm32mp1_interactive.c new file mode 100644 index 000000000..8c2310ac9 --- /dev/null +++ b/roms/u-boot/drivers/ram/stm32mp1/stm32mp1_interactive.c @@ -0,0 +1,497 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2019, STMicroelectronics - All Rights Reserved + */ + +#define LOG_CATEGORY UCLASS_RAM + +#include <common.h> +#include <command.h> +#include <console.h> +#include <cli.h> +#include <clk.h> +#include <log.h> +#include <malloc.h> +#include <ram.h> +#include <reset.h> +#include <asm/global_data.h> +#include "stm32mp1_ddr.h" +#include "stm32mp1_tests.h" + +DECLARE_GLOBAL_DATA_PTR; + +enum ddr_command { + DDR_CMD_HELP, + DDR_CMD_INFO, + DDR_CMD_FREQ, + DDR_CMD_RESET, + DDR_CMD_PARAM, + DDR_CMD_PRINT, + DDR_CMD_EDIT, + DDR_CMD_STEP, + DDR_CMD_NEXT, + DDR_CMD_GO, + DDR_CMD_TEST, + DDR_CMD_TUNING, + DDR_CMD_UNKNOWN, +}; + +const char *step_str[] = { + [STEP_DDR_RESET] = "DDR_RESET", + [STEP_CTL_INIT] = "DDR_CTRL_INIT_DONE", + [STEP_PHY_INIT] = "DDR PHY_INIT_DONE", + [STEP_DDR_READY] = "DDR_READY", + [STEP_RUN] = "RUN" +}; + +enum ddr_command stm32mp1_get_command(char *cmd, int argc) +{ + const char *cmd_string[DDR_CMD_UNKNOWN] = { + [DDR_CMD_HELP] = "help", + [DDR_CMD_INFO] = "info", + [DDR_CMD_FREQ] = "freq", + [DDR_CMD_RESET] = "reset", + [DDR_CMD_PARAM] = "param", + [DDR_CMD_PRINT] = "print", + [DDR_CMD_EDIT] = "edit", + [DDR_CMD_STEP] = "step", + [DDR_CMD_NEXT] = "next", + [DDR_CMD_GO] = "go", +#ifdef CONFIG_STM32MP1_DDR_TESTS + [DDR_CMD_TEST] = "test", +#endif +#ifdef CONFIG_STM32MP1_DDR_TUNING + [DDR_CMD_TUNING] = "tuning", +#endif + }; + /* min and max number of argument */ + const char cmd_arg[DDR_CMD_UNKNOWN][2] = { + [DDR_CMD_HELP] = { 0, 0 }, + [DDR_CMD_INFO] = { 0, 255 }, + [DDR_CMD_FREQ] = { 0, 1 }, + [DDR_CMD_RESET] = { 0, 0 }, + [DDR_CMD_PARAM] = { 0, 2 }, + [DDR_CMD_PRINT] = { 0, 1 }, + [DDR_CMD_EDIT] = { 2, 2 }, + [DDR_CMD_STEP] = { 0, 1 }, + [DDR_CMD_NEXT] = { 0, 0 }, + [DDR_CMD_GO] = { 0, 0 }, +#ifdef CONFIG_STM32MP1_DDR_TESTS + [DDR_CMD_TEST] = { 0, 255 }, +#endif +#ifdef CONFIG_STM32MP1_DDR_TUNING + [DDR_CMD_TUNING] = { 0, 255 }, +#endif + }; + int i; + + for (i = 0; i < DDR_CMD_UNKNOWN; i++) + if (!strcmp(cmd, cmd_string[i])) { + if (argc - 1 < cmd_arg[i][0]) { + printf("no enought argument (min=%d)\n", + cmd_arg[i][0]); + return DDR_CMD_UNKNOWN; + } else if (argc - 1 > cmd_arg[i][1]) { + printf("too many argument (max=%d)\n", + cmd_arg[i][1]); + return DDR_CMD_UNKNOWN; + } else { + return i; + } + } + + printf("unknown command %s\n", cmd); + return DDR_CMD_UNKNOWN; +} + +static void stm32mp1_do_usage(void) +{ + const char *usage = { + "commands:\n\n" + "help displays help\n" + "info displays DDR information\n" + "info <param> <val> changes DDR information\n" + " with <param> = step, name, size, speed or cal\n" + "freq displays the DDR PHY frequency in kHz\n" + "freq <freq> changes the DDR PHY frequency\n" + "param [type|reg] prints input parameters\n" + "param <reg> <val> edits parameters in step 0\n" + "print [type|reg] dumps registers\n" + "edit <reg> <val> modifies one register\n" + "step lists the available step\n" + "step <n> go to the step <n>\n" + "next goes to the next step\n" + "go continues the U-Boot SPL execution\n" + "reset reboots machine\n" +#ifdef CONFIG_STM32MP1_DDR_TESTS + "test [help] | <n> [...] lists (with help) or executes test <n>\n" +#endif +#ifdef CONFIG_STM32MP1_DDR_TUNING + "tuning [help] | <n> [...] lists (with help) or execute tuning <n>\n" +#endif + "\nwith for [type|reg]:\n" + " all registers if absent\n" + " <type> = ctl, phy\n" + " or one category (static, timing, map, perf, cal, dyn)\n" + " <reg> = name of the register\n" + }; + + puts(usage); +} + +static bool stm32mp1_check_step(enum stm32mp1_ddr_interact_step step, + enum stm32mp1_ddr_interact_step expected) +{ + if (step != expected) { + printf("invalid step %d:%s expecting %d:%s\n", + step, step_str[step], + expected, + step_str[expected]); + return false; + } + return true; +} + +static void stm32mp1_do_info(struct ddr_info *priv, + struct stm32mp1_ddr_config *config, + enum stm32mp1_ddr_interact_step step, + int argc, char *const argv[]) +{ + unsigned long value; + static char *ddr_name; + + if (argc == 1) { + printf("step = %d : %s\n", step, step_str[step]); + printf("name = %s\n", config->info.name); + printf("size = 0x%x\n", config->info.size); + printf("speed = %d kHz\n", config->info.speed); + printf("cal = %d\n", config->p_cal_present); + return; + } + + if (argc < 3) { + printf("no enought parameter\n"); + return; + } + if (!strcmp(argv[1], "name")) { + u32 i, name_len = 0; + + for (i = 2; i < argc; i++) + name_len += strlen(argv[i]) + 1; + if (ddr_name) + free(ddr_name); + ddr_name = malloc(name_len); + config->info.name = ddr_name; + if (!ddr_name) { + printf("alloc error, length %d\n", name_len); + return; + } + strcpy(ddr_name, argv[2]); + for (i = 3; i < argc; i++) { + strcat(ddr_name, " "); + strcat(ddr_name, argv[i]); + } + printf("name = %s\n", ddr_name); + return; + } + if (!strcmp(argv[1], "size")) { + if (strict_strtoul(argv[2], 16, &value) < 0) { + printf("invalid value %s\n", argv[2]); + } else { + config->info.size = value; + printf("size = 0x%x\n", config->info.size); + } + return; + } + if (!strcmp(argv[1], "speed")) { + if (strict_strtoul(argv[2], 10, &value) < 0) { + printf("invalid value %s\n", argv[2]); + } else { + config->info.speed = value; + printf("speed = %d kHz\n", config->info.speed); + value = clk_get_rate(&priv->clk); + printf("DDRPHY = %ld kHz\n", value / 1000); + } + return; + } + if (!strcmp(argv[1], "cal")) { + if (strict_strtoul(argv[2], 10, &value) < 0 || + (value != 0 && value != 1)) { + printf("invalid value %s\n", argv[2]); + } else { + config->p_cal_present = value; + printf("cal = %d\n", config->p_cal_present); + } + return; + } + printf("argument %s invalid\n", argv[1]); +} + +static bool stm32mp1_do_freq(struct ddr_info *priv, + int argc, char *const argv[]) +{ + unsigned long ddrphy_clk; + + if (argc == 2) { + if (strict_strtoul(argv[1], 0, &ddrphy_clk) < 0) { + printf("invalid argument %s", argv[1]); + return false; + } + if (clk_set_rate(&priv->clk, ddrphy_clk * 1000)) { + printf("ERROR: update failed!\n"); + return false; + } + } + ddrphy_clk = clk_get_rate(&priv->clk); + printf("DDRPHY = %ld kHz\n", ddrphy_clk / 1000); + if (argc == 2) + return true; + return false; +} + +static void stm32mp1_do_param(enum stm32mp1_ddr_interact_step step, + const struct stm32mp1_ddr_config *config, + int argc, char *const argv[]) +{ + switch (argc) { + case 1: + stm32mp1_dump_param(config, NULL); + break; + case 2: + if (stm32mp1_dump_param(config, argv[1])) + printf("invalid argument %s\n", + argv[1]); + break; + case 3: + if (!stm32mp1_check_step(step, STEP_DDR_RESET)) + return; + stm32mp1_edit_param(config, argv[1], argv[2]); + break; + } +} + +static void stm32mp1_do_print(struct ddr_info *priv, + int argc, char *const argv[]) +{ + switch (argc) { + case 1: + stm32mp1_dump_reg(priv, NULL); + break; + case 2: + if (stm32mp1_dump_reg(priv, argv[1])) + printf("invalid argument %s\n", + argv[1]); + break; + } +} + +static int stm32mp1_do_step(enum stm32mp1_ddr_interact_step step, + int argc, char *const argv[]) +{ + int i; + unsigned long value; + + switch (argc) { + case 1: + for (i = 0; i < ARRAY_SIZE(step_str); i++) + printf("%d:%s\n", i, step_str[i]); + break; + + case 2: + if ((strict_strtoul(argv[1], 0, + &value) < 0) || + value >= ARRAY_SIZE(step_str)) { + printf("invalid argument %s\n", + argv[1]); + goto end; + } + + if (value != STEP_DDR_RESET && + value <= step) { + printf("invalid target %d:%s, current step is %d:%s\n", + (int)value, step_str[value], + step, step_str[step]); + goto end; + } + printf("step to %d:%s\n", + (int)value, step_str[value]); + return (int)value; + }; + +end: + return step; +} + +#if defined(CONFIG_STM32MP1_DDR_TESTS) || defined(CONFIG_STM32MP1_DDR_TUNING) +static const char * const s_result[] = { + [TEST_PASSED] = "Pass", + [TEST_FAILED] = "Failed", + [TEST_ERROR] = "Error" +}; + +static void stm32mp1_ddr_subcmd(struct ddr_info *priv, + int argc, char *argv[], + const struct test_desc array[], + const int array_nb) +{ + int i; + unsigned long value; + int result; + char string[50] = ""; + + if (argc == 1) { + printf("%s:%d\n", argv[0], array_nb); + for (i = 0; i < array_nb; i++) + printf("%d:%s:%s\n", + i, array[i].name, array[i].usage); + return; + } + if (argc > 1 && !strcmp(argv[1], "help")) { + printf("%s:%d\n", argv[0], array_nb); + for (i = 0; i < array_nb; i++) + printf("%d:%s:%s:%s\n", i, + array[i].name, array[i].usage, array[i].help); + return; + } + + if ((strict_strtoul(argv[1], 0, &value) < 0) || + value >= array_nb) { + sprintf(string, "invalid argument %s", + argv[1]); + result = TEST_FAILED; + goto end; + } + + if (argc > (array[value].max_args + 2)) { + sprintf(string, "invalid nb of args %d, max %d", + argc - 2, array[value].max_args); + result = TEST_FAILED; + goto end; + } + + printf("execute %d:%s\n", (int)value, array[value].name); + clear_ctrlc(); + result = array[value].fct(priv->ctl, priv->phy, + string, argc - 2, &argv[2]); + +end: + printf("Result: %s [%s]\n", s_result[result], string); +} +#endif + +bool stm32mp1_ddr_interactive(void *priv, + enum stm32mp1_ddr_interact_step step, + const struct stm32mp1_ddr_config *config) +{ + char buffer[CONFIG_SYS_CBSIZE]; + char *argv[CONFIG_SYS_MAXARGS + 1]; /* NULL terminated */ + int argc; + static int next_step = -1; + + if (next_step < 0 && step == STEP_DDR_RESET) { +#ifdef CONFIG_STM32MP1_DDR_INTERACTIVE_FORCE + gd->flags &= ~(GD_FLG_SILENT | + GD_FLG_DISABLE_CONSOLE); + next_step = STEP_DDR_RESET; +#else + unsigned long start = get_timer(0); + + while (1) { + if (tstc() && (getchar() == 'd')) { + next_step = STEP_DDR_RESET; + break; + } + if (get_timer(start) > 100) + break; + } +#endif + } + + log_debug("** step %d ** %s / %d\n", step, step_str[step], next_step); + + if (next_step < 0) + return false; + + if (step < 0 || step > ARRAY_SIZE(step_str)) { + printf("** step %d ** INVALID\n", step); + return false; + } + + printf("%d:%s\n", step, step_str[step]); + + if (next_step > step) + return false; + + while (next_step == step) { + cli_readline_into_buffer("DDR>", buffer, 0); + argc = cli_simple_parse_line(buffer, argv); + if (!argc) + continue; + + switch (stm32mp1_get_command(argv[0], argc)) { + case DDR_CMD_HELP: + stm32mp1_do_usage(); + break; + + case DDR_CMD_INFO: + stm32mp1_do_info(priv, + (struct stm32mp1_ddr_config *)config, + step, argc, argv); + break; + + case DDR_CMD_FREQ: + if (stm32mp1_do_freq(priv, argc, argv)) + next_step = STEP_DDR_RESET; + break; + + case DDR_CMD_RESET: + do_reset(NULL, 0, 0, NULL); + break; + + case DDR_CMD_PARAM: + stm32mp1_do_param(step, config, argc, argv); + break; + + case DDR_CMD_PRINT: + stm32mp1_do_print(priv, argc, argv); + break; + + case DDR_CMD_EDIT: + stm32mp1_edit_reg(priv, argv[1], argv[2]); + break; + + case DDR_CMD_GO: + next_step = STEP_RUN; + break; + + case DDR_CMD_NEXT: + next_step = step + 1; + break; + + case DDR_CMD_STEP: + next_step = stm32mp1_do_step(step, argc, argv); + break; + +#ifdef CONFIG_STM32MP1_DDR_TESTS + case DDR_CMD_TEST: + if (!stm32mp1_check_step(step, STEP_DDR_READY)) + continue; + stm32mp1_ddr_subcmd(priv, argc, argv, test, test_nb); + break; +#endif + +#ifdef CONFIG_STM32MP1_DDR_TUNING + case DDR_CMD_TUNING: + if (!stm32mp1_check_step(step, STEP_DDR_READY)) + continue; + stm32mp1_ddr_subcmd(priv, argc, argv, + tuning, tuning_nb); + break; +#endif + + default: + break; + } + } + return next_step == STEP_DDR_RESET; +} |