diff options
Diffstat (limited to 'roms/u-boot/drivers/sysreset/Kconfig')
| -rw-r--r-- | roms/u-boot/drivers/sysreset/Kconfig | 153 |
1 files changed, 153 insertions, 0 deletions
diff --git a/roms/u-boot/drivers/sysreset/Kconfig b/roms/u-boot/drivers/sysreset/Kconfig new file mode 100644 index 000000000..ac77ffbc8 --- /dev/null +++ b/roms/u-boot/drivers/sysreset/Kconfig @@ -0,0 +1,153 @@ +# +# System reset devices +# + +menu "System reset device drivers" + +config SYSRESET + bool "Enable support for system reset drivers" + depends on DM + help + Enable system reset drivers which can be used to reset the CPU or + board. Each driver can provide a reset method which will be called + to effect a reset. The uclass will try all available drivers when + reset_walk() is called. + +config SPL_SYSRESET + bool "Enable support for system reset drivers in SPL mode" + depends on SYSRESET && SPL_DM + help + Enable system reset drivers which can be used to reset the CPU or + board. Each driver can provide a reset method which will be called + to effect a reset. The uclass will try all available drivers when + reset_walk() is called. + +config TPL_SYSRESET + bool "Enable support for system reset drivers in TPL mode" + depends on SYSRESET && TPL_DM + help + Enable system reset drivers which can be used to reset the CPU or + board. Each driver can provide a reset method which will be called + to effect a reset. The uclass will try all available drivers when + reset_walk() is called. + +if SYSRESET + +config SYSRESET_CMD_RESET + bool "sysreset implementation of the reset command" + default y + help + Enable sysreset implementation of the reset command. + +if CMD_POWEROFF + +config SYSRESET_CMD_POWEROFF + bool "sysreset implementation of the poweroff command" + help + This should be selected by the appropriate PMIC driver if + the poweroff command is enabled. + +endif + +config POWEROFF_GPIO + bool "Enable support for GPIO poweroff driver" + select DM_GPIO + help + Support for system poweroff using a GPIO pin. This can be used + for systems having a single GPIO to trigger a system poweroff. + +config SYSRESET_GPIO + bool "Enable support for GPIO reset driver" + select DM_GPIO + help + Reset support via GPIO pin connected reset logic. This is used for + example on Microblaze where reset logic can be controlled via GPIO + pin which triggers cpu reset. + +config SYSRESET_MICROBLAZE + bool "Enable support for Microblaze soft reset" + depends on MICROBLAZE + help + This is soft reset on Microblaze which does jump to 0x0 address. + +config SYSRESET_OCTEON + bool "Enable support for Marvell Octeon SoC family" + depends on ARCH_OCTEON + help + This enables the system reset driver support for Marvell Octeon + SoCs. + +config SYSRESET_PSCI + bool "Enable support for PSCI System Reset" + depends on ARM_PSCI_FW + select SPL_ARM_PSCI_FW if SPL + help + Enable PSCI SYSTEM_RESET function call. To use this, PSCI firmware + must be running on your system. + +config SYSRESET_SOCFPGA + bool "Enable support for Intel SOCFPGA family" + depends on ARCH_SOCFPGA && (TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10) + help + This enables the system reset driver support for Intel SOCFPGA SoCs + (Cyclone 5, Arria 5 and Arria 10). + +config SYSRESET_SOCFPGA_SOC64 + bool "Enable support for Intel SOCFPGA SoC64 family (Stratix10/Agilex)" + depends on ARCH_SOCFPGA && TARGET_SOCFPGA_SOC64 + help + This enables the system reset driver support for Intel SOCFPGA + SoC64 SoCs. + +config SYSRESET_TI_SCI + bool "TI System Control Interface (TI SCI) system reset driver" + depends on TI_SCI_PROTOCOL + help + This enables the system reset driver support over TI System Control + Interface available on some new TI's SoCs. + +endif + +config SYSRESET_SYSCON + bool "Enable support for mfd syscon reboot driver" + select REGMAP + select SYSCON + help + Reboot support for generic SYSCON mapped register reset. + +config SYSRESET_WATCHDOG + bool "Enable support for watchdog reboot driver" + select WDT + help + Reboot support for generic watchdog reset. + +config SYSRESET_RESETCTL + bool "Enable support for reset controller reboot driver" + select DM_RESET + help + Reboot support using generic reset controller. + +config SYSRESET_X86 + bool "Enable support for x86 processor reboot driver" + depends on X86 + help + Reboot support for generic x86 processor reset. + +config SYSRESET_SPL_X86 + bool "Enable support for x86 processor reboot driver in SPL" + depends on X86 + help + Reboot support for generic x86 processor reset in SPL. + +config SYSRESET_TPL_X86 + bool "Enable support for x86 processor reboot driver in TPL" + depends on X86 + help + Reboot support for generic x86 processor reset in TPL. + +config SYSRESET_MPC83XX + bool "Enable support MPC83xx SoC family reboot driver" + help + Reboot support for NXP MPC83xx SoCs. + +endmenu |