diff options
Diffstat (limited to 'roms/u-boot/drivers/video/bridge')
| -rw-r--r-- | roms/u-boot/drivers/video/bridge/Kconfig | 35 | ||||
| -rw-r--r-- | roms/u-boot/drivers/video/bridge/Makefile | 9 | ||||
| -rw-r--r-- | roms/u-boot/drivers/video/bridge/anx6345.c | 425 | ||||
| -rw-r--r-- | roms/u-boot/drivers/video/bridge/ps862x.c | 137 | ||||
| -rw-r--r-- | roms/u-boot/drivers/video/bridge/ptn3460.c | 33 | ||||
| -rw-r--r-- | roms/u-boot/drivers/video/bridge/video-bridge-uclass.c | 139 |
6 files changed, 778 insertions, 0 deletions
diff --git a/roms/u-boot/drivers/video/bridge/Kconfig b/roms/u-boot/drivers/video/bridge/Kconfig new file mode 100644 index 000000000..765f7380b --- /dev/null +++ b/roms/u-boot/drivers/video/bridge/Kconfig @@ -0,0 +1,35 @@ +config VIDEO_BRIDGE + bool "Support video bridges" + depends on DM + help + Some platforms use video bridges to convert from one output to + another. For example, where the SoC only supports eDP and the LCD + requires LVDS, an eDP->LVDS bridge chip can be used to provide the + necessary conversion. This option enables support for these devices. + +config VIDEO_BRIDGE_PARADE_PS862X + bool "Support Parade PS862X DP->LVDS bridge" + depends on VIDEO_BRIDGE + help + The Parade PS8622 and PS8625 are DisplayPort-to-LVDS (Low voltage + differential signalling) converters. They enable an LVDS LCD panel + to be connected to an eDP output device such as an SoC that lacks + LVDS capability, or where LVDS requires too many signals to route + on the PCB. Setup parameters are provided in the device tree. + +config VIDEO_BRIDGE_NXP_PTN3460 + bool "Support NXP PTN3460 DP->LVDS bridge" + depends on VIDEO_BRIDGE + help + The NXP PTN3460 is a DisplayPort-to-LVDS (Low voltage differential + signalling) converter. It enables an LVDS LCD panel to be connected + to an eDP output device such as an SoC that lacks LVDS capability, + or where LVDS requires too many signals to route on the PCB. + +config VIDEO_BRIDGE_ANALOGIX_ANX6345 + bool "Support Analogix ANX6345 RGB->DP bridge" + depends on VIDEO_BRIDGE + select DM_I2C + help + The Analogix ANX6345 is RGB-to-DP converter. It enables an eDP LCD + panel to be connected to an parallel LCD interface. diff --git a/roms/u-boot/drivers/video/bridge/Makefile b/roms/u-boot/drivers/video/bridge/Makefile new file mode 100644 index 000000000..45e54ac17 --- /dev/null +++ b/roms/u-boot/drivers/video/bridge/Makefile @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (C) 2015 Google, Inc +# Written by Simon Glass <sjg@chromium.org> + +obj-$(CONFIG_VIDEO_BRIDGE) += video-bridge-uclass.o +obj-$(CONFIG_VIDEO_BRIDGE_PARADE_PS862X) += ps862x.o +obj-$(CONFIG_VIDEO_BRIDGE_NXP_PTN3460) += ptn3460.o +obj-$(CONFIG_VIDEO_BRIDGE_ANALOGIX_ANX6345) += anx6345.o diff --git a/roms/u-boot/drivers/video/bridge/anx6345.c b/roms/u-boot/drivers/video/bridge/anx6345.c new file mode 100644 index 000000000..93fa25f16 --- /dev/null +++ b/roms/u-boot/drivers/video/bridge/anx6345.c @@ -0,0 +1,425 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2017 Vasily Khoruzhick <anarsoul@gmail.com> + */ + +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <i2c.h> +#include <edid.h> +#include <log.h> +#include <video_bridge.h> +#include <linux/delay.h> +#include "../anx98xx-edp.h" + +#define DP_MAX_LINK_RATE 0x001 +#define DP_MAX_LANE_COUNT 0x002 +#define DP_MAX_LANE_COUNT_MASK 0x1f + +struct anx6345_priv { + u8 edid[EDID_SIZE]; +}; + +static int anx6345_write(struct udevice *dev, unsigned int addr_off, + unsigned char reg_addr, unsigned char value) +{ + uint8_t buf[2]; + struct i2c_msg msg; + int ret; + + msg.addr = addr_off; + msg.flags = 0; + buf[0] = reg_addr; + buf[1] = value; + msg.buf = buf; + msg.len = 2; + ret = dm_i2c_xfer(dev, &msg, 1); + if (ret) { + debug("%s: write failed, reg=%#x, value=%#x, ret=%d\n", + __func__, reg_addr, value, ret); + return ret; + } + + return 0; +} + +static int anx6345_read(struct udevice *dev, unsigned int addr_off, + unsigned char reg_addr, unsigned char *value) +{ + uint8_t addr, val; + struct i2c_msg msg[2]; + int ret; + + msg[0].addr = addr_off; + msg[0].flags = 0; + addr = reg_addr; + msg[0].buf = &addr; + msg[0].len = 1; + msg[1].addr = addr_off; + msg[1].flags = I2C_M_RD; + msg[1].buf = &val; + msg[1].len = 1; + ret = dm_i2c_xfer(dev, msg, 2); + if (ret) { + debug("%s: read failed, reg=%.2x, value=%p, ret=%d\n", + __func__, (int)reg_addr, value, ret); + return ret; + } + *value = val; + + return 0; +} + +static int anx6345_write_r0(struct udevice *dev, unsigned char reg_addr, + unsigned char value) +{ + struct dm_i2c_chip *chip = dev_get_parent_plat(dev); + + return anx6345_write(dev, chip->chip_addr, reg_addr, value); +} + +static int anx6345_read_r0(struct udevice *dev, unsigned char reg_addr, + unsigned char *value) +{ + struct dm_i2c_chip *chip = dev_get_parent_plat(dev); + + return anx6345_read(dev, chip->chip_addr, reg_addr, value); +} + +static int anx6345_write_r1(struct udevice *dev, unsigned char reg_addr, + unsigned char value) +{ + struct dm_i2c_chip *chip = dev_get_parent_plat(dev); + + return anx6345_write(dev, chip->chip_addr + 1, reg_addr, value); +} + +static int anx6345_read_r1(struct udevice *dev, unsigned char reg_addr, + unsigned char *value) +{ + struct dm_i2c_chip *chip = dev_get_parent_plat(dev); + + return anx6345_read(dev, chip->chip_addr + 1, reg_addr, value); +} + +static int anx6345_set_backlight(struct udevice *dev, int percent) +{ + return -ENOSYS; +} + +static int anx6345_aux_wait(struct udevice *dev) +{ + int ret = -ETIMEDOUT; + u8 v; + int retries = 1000; + + do { + anx6345_read_r0(dev, ANX9804_DP_AUX_CH_CTL_2, &v); + if (!(v & ANX9804_AUX_EN)) { + ret = 0; + break; + } + udelay(100); + } while (retries--); + + if (ret) { + debug("%s: timed out waiting for AUX_EN to clear\n", __func__); + return ret; + } + + ret = -ETIMEDOUT; + retries = 1000; + do { + anx6345_read_r1(dev, ANX9804_DP_INT_STA, &v); + if (v & ANX9804_RPLY_RECEIV) { + ret = 0; + break; + } + udelay(100); + } while (retries--); + + if (ret) { + debug("%s: timed out waiting to receive reply\n", __func__); + return ret; + } + + /* Clear RPLY_RECEIV bit */ + anx6345_write_r1(dev, ANX9804_DP_INT_STA, v); + + anx6345_read_r0(dev, ANX9804_AUX_CH_STA, &v); + if ((v & ANX9804_AUX_STATUS_MASK) != 0) { + debug("AUX status: %d\n", v & ANX9804_AUX_STATUS_MASK); + ret = -EIO; + } + + return ret; +} + +static void anx6345_aux_addr(struct udevice *dev, u32 addr) +{ + u8 val; + + val = addr & 0xff; + anx6345_write_r0(dev, ANX9804_DP_AUX_ADDR_7_0, val); + val = (addr >> 8) & 0xff; + anx6345_write_r0(dev, ANX9804_DP_AUX_ADDR_15_8, val); + val = (addr >> 16) & 0x0f; + anx6345_write_r0(dev, ANX9804_DP_AUX_ADDR_19_16, val); +} + +static int anx6345_aux_transfer(struct udevice *dev, u8 req, + u32 addr, u8 *buf, size_t len) +{ + int i, ret; + u8 ctrl1 = req; + u8 ctrl2 = ANX9804_AUX_EN; + + if (len > 16) + return -E2BIG; + + if (len) + ctrl1 |= ANX9804_AUX_LENGTH(len); + else + ctrl2 |= ANX9804_ADDR_ONLY; + + if (len && !(req & ANX9804_AUX_TX_COMM_READ)) { + for (i = 0; i < len; i++) + anx6345_write_r0(dev, ANX9804_BUF_DATA_0 + i, buf[i]); + } + + anx6345_aux_addr(dev, addr); + anx6345_write_r0(dev, ANX9804_DP_AUX_CH_CTL_1, ctrl1); + anx6345_write_r0(dev, ANX9804_DP_AUX_CH_CTL_2, ctrl2); + ret = anx6345_aux_wait(dev); + if (ret) { + debug("AUX transaction timed out\n"); + return ret; + } + + if (len && (req & ANX9804_AUX_TX_COMM_READ)) { + for (i = 0; i < len; i++) + anx6345_read_r0(dev, ANX9804_BUF_DATA_0 + i, &buf[i]); + } + + return 0; +} + +static int anx6345_read_aux_i2c(struct udevice *dev, u8 chip_addr, + u8 offset, size_t count, u8 *buf) +{ + int i, ret; + size_t cur_cnt; + u8 cur_offset; + + for (i = 0; i < count; i += 16) { + cur_cnt = (count - i) > 16 ? 16 : count - i; + cur_offset = offset + i; + ret = anx6345_aux_transfer(dev, ANX9804_AUX_TX_COMM_MOT, + chip_addr, &cur_offset, 1); + if (ret) { + debug("%s: failed to set i2c offset: %d\n", + __func__, ret); + return ret; + } + ret = anx6345_aux_transfer(dev, ANX9804_AUX_TX_COMM_READ, + chip_addr, buf + i, cur_cnt); + if (ret) { + debug("%s: failed to read from i2c device: %d\n", + __func__, ret); + return ret; + } + } + + return 0; +} + +static int anx6345_read_dpcd(struct udevice *dev, u32 reg, u8 *val) +{ + int ret; + + ret = anx6345_aux_transfer(dev, + ANX9804_AUX_TX_COMM_READ | + ANX9804_AUX_TX_COMM_DP_TRANSACTION, + reg, val, 1); + if (ret) { + debug("Failed to read DPCD\n"); + return ret; + } + + return 0; +} + +static int anx6345_read_edid(struct udevice *dev, u8 *buf, int size) +{ + struct anx6345_priv *priv = dev_get_priv(dev); + + if (size > EDID_SIZE) + size = EDID_SIZE; + memcpy(buf, priv->edid, size); + + return size; +} + +static int anx6345_attach(struct udevice *dev) +{ + /* No-op */ + return 0; +} + +static int anx6345_enable(struct udevice *dev) +{ + u8 chipid, colordepth, lanes, data_rate, c; + int ret, i, bpp; + struct display_timing timing; + struct anx6345_priv *priv = dev_get_priv(dev); + + /* Deassert reset and enable power */ + ret = video_bridge_set_active(dev, true); + if (ret) + return ret; + + /* Reset */ + anx6345_write_r1(dev, ANX9804_RST_CTRL_REG, 1); + mdelay(100); + anx6345_write_r1(dev, ANX9804_RST_CTRL_REG, 0); + + /* Write 0 to the powerdown reg (powerup everything) */ + anx6345_write_r1(dev, ANX9804_POWERD_CTRL_REG, 0); + + ret = anx6345_read_r1(dev, ANX9804_DEV_IDH_REG, &chipid); + if (ret) + debug("%s: read id failed: %d\n", __func__, ret); + + switch (chipid) { + case 0x63: + debug("ANX63xx detected.\n"); + break; + default: + debug("Error anx6345 chipid mismatch: %.2x\n", (int)chipid); + return -ENODEV; + } + + for (i = 0; i < 100; i++) { + anx6345_read_r0(dev, ANX9804_SYS_CTRL2_REG, &c); + anx6345_write_r0(dev, ANX9804_SYS_CTRL2_REG, c); + anx6345_read_r0(dev, ANX9804_SYS_CTRL2_REG, &c); + if ((c & ANX9804_SYS_CTRL2_CHA_STA) == 0) + break; + + mdelay(5); + } + if (i == 100) + debug("Error anx6345 clock is not stable\n"); + + /* Set a bunch of analog related register values */ + anx6345_write_r0(dev, ANX9804_PLL_CTRL_REG, 0x00); + anx6345_write_r1(dev, ANX9804_ANALOG_DEBUG_REG1, 0x70); + anx6345_write_r0(dev, ANX9804_LINK_DEBUG_REG, 0x30); + + /* Force HPD */ + anx6345_write_r0(dev, ANX9804_SYS_CTRL3_REG, + ANX9804_SYS_CTRL3_F_HPD | ANX9804_SYS_CTRL3_HPD_CTRL); + + /* Power up and configure lanes */ + anx6345_write_r0(dev, ANX9804_ANALOG_POWER_DOWN_REG, 0x00); + anx6345_write_r0(dev, ANX9804_TRAINING_LANE0_SET_REG, 0x00); + anx6345_write_r0(dev, ANX9804_TRAINING_LANE1_SET_REG, 0x00); + anx6345_write_r0(dev, ANX9804_TRAINING_LANE2_SET_REG, 0x00); + anx6345_write_r0(dev, ANX9804_TRAINING_LANE3_SET_REG, 0x00); + + /* Reset AUX CH */ + anx6345_write_r1(dev, ANX9804_RST_CTRL2_REG, + ANX9804_RST_CTRL2_AUX); + anx6345_write_r1(dev, ANX9804_RST_CTRL2_REG, 0); + + /* Powerdown audio and some other unused bits */ + anx6345_write_r1(dev, ANX9804_POWERD_CTRL_REG, ANX9804_POWERD_AUDIO); + anx6345_write_r0(dev, ANX9804_HDCP_CONTROL_0_REG, 0x00); + anx6345_write_r0(dev, 0xa7, 0x00); + + anx6345_read_aux_i2c(dev, 0x50, 0x0, EDID_SIZE, priv->edid); + if (edid_get_timing(priv->edid, EDID_SIZE, &timing, &bpp) != 0) { + debug("Failed to parse EDID\n"); + return -EIO; + } + debug("%s: panel found: %dx%d, bpp %d\n", __func__, + timing.hactive.typ, timing.vactive.typ, bpp); + if (bpp == 6) + colordepth = 0x00; /* 6 bit */ + else + colordepth = 0x10; /* 8 bit */ + anx6345_write_r1(dev, ANX9804_VID_CTRL2_REG, colordepth); + + if (anx6345_read_dpcd(dev, DP_MAX_LINK_RATE, &data_rate)) { + debug("%s: Failed to DP_MAX_LINK_RATE\n", __func__); + return -EIO; + } + debug("%s: data_rate: %d\n", __func__, (int)data_rate); + if (anx6345_read_dpcd(dev, DP_MAX_LANE_COUNT, &lanes)) { + debug("%s: Failed to read DP_MAX_LANE_COUNT\n", __func__); + return -EIO; + } + lanes &= DP_MAX_LANE_COUNT_MASK; + debug("%s: lanes: %d\n", __func__, (int)lanes); + + /* Set data-rate / lanes */ + anx6345_write_r0(dev, ANX9804_LINK_BW_SET_REG, data_rate); + anx6345_write_r0(dev, ANX9804_LANE_COUNT_SET_REG, lanes); + + /* Link training */ + anx6345_write_r0(dev, ANX9804_LINK_TRAINING_CTRL_REG, + ANX9804_LINK_TRAINING_CTRL_EN); + mdelay(5); + for (i = 0; i < 100; i++) { + anx6345_read_r0(dev, ANX9804_LINK_TRAINING_CTRL_REG, &c); + if ((chipid == 0x63) && (c & 0x80) == 0) + break; + + mdelay(5); + } + if (i == 100) { + debug("Error anx6345 link training timeout\n"); + return -ENODEV; + } + + /* Enable */ + anx6345_write_r1(dev, ANX9804_VID_CTRL1_REG, + ANX9804_VID_CTRL1_VID_EN | ANX9804_VID_CTRL1_EDGE); + /* Force stream valid */ + anx6345_write_r0(dev, ANX9804_SYS_CTRL3_REG, + ANX9804_SYS_CTRL3_F_HPD | + ANX9804_SYS_CTRL3_HPD_CTRL | + ANX9804_SYS_CTRL3_F_VALID | + ANX9804_SYS_CTRL3_VALID_CTRL); + + return 0; +} + +static int anx6345_probe(struct udevice *dev) +{ + if (device_get_uclass_id(dev->parent) != UCLASS_I2C) + return -EPROTONOSUPPORT; + + return anx6345_enable(dev); +} + +struct video_bridge_ops anx6345_ops = { + .attach = anx6345_attach, + .set_backlight = anx6345_set_backlight, + .read_edid = anx6345_read_edid, +}; + +static const struct udevice_id anx6345_ids[] = { + { .compatible = "analogix,anx6345", }, + { } +}; + +U_BOOT_DRIVER(analogix_anx6345) = { + .name = "analogix_anx6345", + .id = UCLASS_VIDEO_BRIDGE, + .of_match = anx6345_ids, + .probe = anx6345_probe, + .ops = &anx6345_ops, + .priv_auto = sizeof(struct anx6345_priv), +}; diff --git a/roms/u-boot/drivers/video/bridge/ps862x.c b/roms/u-boot/drivers/video/bridge/ps862x.c new file mode 100644 index 000000000..c8e105857 --- /dev/null +++ b/roms/u-boot/drivers/video/bridge/ps862x.c @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2015 Google, Inc + * Written by Simon Glass <sjg@chromium.org> + */ + +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <i2c.h> +#include <log.h> +#include <video_bridge.h> +#include <asm/global_data.h> +#include <linux/delay.h> +#include <power/regulator.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Initialisation of the chip is a process of writing certain values into + * certain registers over i2c bus. The chip in fact responds to a range of + * addresses on the i2c bus, so for each written value three parameters are + * required: i2c address, register address and the actual value. + * + * The base address is derived from the device tree, but oddly the chip + * responds on several addresses with different register sets for each. + */ + +/** + * ps8622_write() Write a PS8622 eDP bridge i2c register + * + * @param dev I2C device + * @param addr_off offset from the i2c base address for ps8622 + * @param reg_addr register address to write + * @param value value to be written + * @return 0 on success, non-0 on failure + */ +static int ps8622_write(struct udevice *dev, unsigned addr_off, + unsigned char reg_addr, unsigned char value) +{ + struct dm_i2c_chip *chip = dev_get_parent_plat(dev); + uint8_t buf[2]; + struct i2c_msg msg; + int ret; + + msg.addr = chip->chip_addr + addr_off; + msg.flags = 0; + buf[0] = reg_addr; + buf[1] = value; + msg.buf = buf; + msg.len = 2; + ret = dm_i2c_xfer(dev, &msg, 1); + if (ret) { + debug("%s: write failed, reg=%#x, value=%#x, ret=%d\n", + __func__, reg_addr, value, ret); + return ret; + } + + return 0; +} + +static int ps8622_set_backlight(struct udevice *dev, int percent) +{ + int level = percent * 255 / 100; + + debug("%s: level=%d\n", __func__, level); + return ps8622_write(dev, 0x01, 0xa7, level); +} + +static int ps8622_attach(struct udevice *dev) +{ + const uint8_t *params; + struct udevice *reg; + int ret, i, len; + + debug("%s: %s\n", __func__, dev->name); + /* set the LDO providing the 1.2V rail to the Parade bridge */ + ret = uclass_get_device_by_phandle(UCLASS_REGULATOR, dev, + "power-supply", ®); + if (!ret) { + ret = regulator_autoset(reg); + } else if (ret != -ENOENT) { + debug("%s: Failed to enable power: ret=%d\n", __func__, ret); + return ret; + } + + ret = video_bridge_set_active(dev, true); + if (ret) + return ret; + + params = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "parade,regs", + &len); + if (!params || len % 3) { + debug("%s: missing/invalid params=%p, len=%x\n", __func__, + params, len); + return -EINVAL; + } + + /* need to wait 20ms after power on before doing I2C writes */ + mdelay(20); + for (i = 0; i < len; i += 3) { + ret = ps8622_write(dev, params[i + 0], params[i + 1], + params[i + 2]); + if (ret) + return ret; + } + + return 0; +} + +static int ps8622_probe(struct udevice *dev) +{ + debug("%s\n", __func__); + if (device_get_uclass_id(dev->parent) != UCLASS_I2C) + return -EPROTONOSUPPORT; + + return 0; +} + +struct video_bridge_ops ps8622_ops = { + .attach = ps8622_attach, + .set_backlight = ps8622_set_backlight, +}; + +static const struct udevice_id ps8622_ids[] = { + { .compatible = "parade,ps8622", }, + { .compatible = "parade,ps8625", }, + { } +}; + +U_BOOT_DRIVER(parade_ps8622) = { + .name = "parade_ps8622", + .id = UCLASS_VIDEO_BRIDGE, + .of_match = ps8622_ids, + .probe = ps8622_probe, + .ops = &ps8622_ops, +}; diff --git a/roms/u-boot/drivers/video/bridge/ptn3460.c b/roms/u-boot/drivers/video/bridge/ptn3460.c new file mode 100644 index 000000000..4760f0410 --- /dev/null +++ b/roms/u-boot/drivers/video/bridge/ptn3460.c @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2015 Google, Inc + * Written by Simon Glass <sjg@chromium.org> + */ + +#include <common.h> +#include <dm.h> +#include <log.h> +#include <video_bridge.h> + +static int ptn3460_attach(struct udevice *dev) +{ + debug("%s: %s\n", __func__, dev->name); + + return video_bridge_set_active(dev, true); +} + +struct video_bridge_ops ptn3460_ops = { + .attach = ptn3460_attach, +}; + +static const struct udevice_id ptn3460_ids[] = { + { .compatible = "nxp,ptn3460", }, + { } +}; + +U_BOOT_DRIVER(parade_ptn3460) = { + .name = "nmp_ptn3460", + .id = UCLASS_VIDEO_BRIDGE, + .of_match = ptn3460_ids, + .ops = &ptn3460_ops, +}; diff --git a/roms/u-boot/drivers/video/bridge/video-bridge-uclass.c b/roms/u-boot/drivers/video/bridge/video-bridge-uclass.c new file mode 100644 index 000000000..08d38b244 --- /dev/null +++ b/roms/u-boot/drivers/video/bridge/video-bridge-uclass.c @@ -0,0 +1,139 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2015 Google, Inc + * Written by Simon Glass <sjg@chromium.org> + */ + +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <edid.h> +#include <log.h> +#include <video_bridge.h> +#include <linux/delay.h> + +int video_bridge_set_backlight(struct udevice *dev, int percent) +{ + struct video_bridge_ops *ops = video_bridge_get_ops(dev); + + if (!ops->set_backlight) + return -ENOSYS; + + return ops->set_backlight(dev, percent); +} + +int video_bridge_attach(struct udevice *dev) +{ + struct video_bridge_ops *ops = video_bridge_get_ops(dev); + + if (!ops->attach) + return -ENOSYS; + + return ops->attach(dev); +} + +int video_bridge_check_attached(struct udevice *dev) +{ + struct video_bridge_priv *uc_priv = dev_get_uclass_priv(dev); + struct video_bridge_ops *ops = video_bridge_get_ops(dev); + int ret; + + if (!ops->check_attached) { + ret = dm_gpio_get_value(&uc_priv->hotplug); + + return ret > 0 ? 0 : ret == 0 ? -ENOTCONN : ret; + } + + return ops->check_attached(dev); +} + +int video_bridge_read_edid(struct udevice *dev, u8 *buf, int buf_size) +{ + struct video_bridge_ops *ops = video_bridge_get_ops(dev); + + if (!ops || !ops->read_edid) + return -ENOSYS; + return ops->read_edid(dev, buf, buf_size); +} + +static int video_bridge_pre_probe(struct udevice *dev) +{ + struct video_bridge_priv *uc_priv = dev_get_uclass_priv(dev); + int ret; + + debug("%s\n", __func__); + ret = gpio_request_by_name(dev, "sleep-gpios", 0, + &uc_priv->sleep, GPIOD_IS_OUT); + if (ret) { + debug("%s: Could not decode sleep-gpios (%d)\n", __func__, ret); + if (ret != -ENOENT) + return ret; + } + /* + * Drop this for now as we do not have driver model pinctrl support + * + * ret = dm_gpio_set_pull(&uc_priv->sleep, GPIO_PULL_NONE); + * if (ret) { + * debug("%s: Could not set sleep pull value\n", __func__); + * return ret; + * } + */ + ret = gpio_request_by_name(dev, "reset-gpios", 0, &uc_priv->reset, + GPIOD_IS_OUT); + if (ret) { + debug("%s: Could not decode reset-gpios (%d)\n", __func__, ret); + if (ret != -ENOENT) + return ret; + } + /* + * Drop this for now as we do not have driver model pinctrl support + * + * ret = dm_gpio_set_pull(&uc_priv->reset, GPIO_PULL_NONE); + * if (ret) { + * debug("%s: Could not set reset pull value\n", __func__); + * return ret; + * } + */ + ret = gpio_request_by_name(dev, "hotplug-gpios", 0, &uc_priv->hotplug, + GPIOD_IS_IN); + if (ret) { + debug("%s: Could not decode hotplug (%d)\n", __func__, ret); + if (ret != -ENOENT) + return ret; + } + + return 0; +} + +int video_bridge_set_active(struct udevice *dev, bool active) +{ + struct video_bridge_priv *uc_priv = dev_get_uclass_priv(dev); + int ret = 0; + + debug("%s: %d\n", __func__, active); + if (uc_priv->sleep.dev) { + ret = dm_gpio_set_value(&uc_priv->sleep, !active); + if (ret) + return ret; + } + + if (!active) + return 0; + + if (uc_priv->reset.dev) { + ret = dm_gpio_set_value(&uc_priv->reset, true); + if (ret) + return ret; + udelay(10); + ret = dm_gpio_set_value(&uc_priv->reset, false); + } + + return ret; +} + +UCLASS_DRIVER(video_bridge) = { + .id = UCLASS_VIDEO_BRIDGE, + .name = "video_bridge", + .per_device_auto = sizeof(struct video_bridge_priv), + .pre_probe = video_bridge_pre_probe, +}; |